Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Hazards, Contamination & Allergens0/4
    1. TCS food, the danger zone and high-risk guests
    2. Infection, intoxication and the toxins cooking cannot fix
    3. Chemical hazards, physical hazards and food defense
    4. Food allergens and cross-contact
  2. 2.Personal Hygiene & Employee Health0/4
    1. What employees must report and what the person in charge owes
    2. Exclude or restrict: matching the response to the illness
    3. Handwashing: how, where and when
    4. Gloves, bare-hand contact, jewelry and work habits
  3. 3.Purchasing, Receiving & Storage0/4
    1. Approved sources and the records that prove them
    2. Receiving: temperatures, condition and rejection
    3. Storage: shelf order, location and chemicals
    4. Date marking and first in, first out
  4. 4.Preparation, Cooking & Cooling0/4
    1. Safe preparation and approved thawing methods
    2. Cooking temperatures and how to verify them
    3. Raw and undercooked food: advisories, parasites and high-risk guests
    4. Cooling and reheating cooked food
  5. 5.Holding & Service0/4
    1. Hot holding, cold holding and reheating
    2. Using time instead of temperature
    3. Serving food and handling tableware
    4. Buffets, catering and vending machines
  6. 6.Facilities, Sanitation & Pests0/5
    1. Cleaning versus sanitizing
    2. Proving that sanitizing works
    3. Water supply, backflow and drains
    4. Equipment, building surfaces and chemical storage
    5. Pest control and garbage
  7. 7.Management Systems, HACCP & Inspections0/4
    1. Active managerial control and the person in charge
    2. HACCP plans and prerequisite programs
    3. Emergencies, illness complaints and recalls
    4. Inspections and staff training
Saved in this browser. Move it to another device →
← Management Systems, HACCP & Inspections

Chapter 7 · Lesson 2 of 4

HACCP plans and prerequisite programs

1 min read

A HACCP plan sits on top of prerequisite programs that must already work: supplier approval with written specifications, cleaning schedules, personal hygiene rules, equipment maintenance, pest control, standard operating procedures and training. The plan itself follows seven principles in order.

  • 1. Conduct a hazard analysis, producing a list of the significant biological, chemical and physical hazards.
  • 2. Determine critical control points, the steps where control is essential to prevent, eliminate or reduce a hazard. Not every step is one.
  • 3. Set critical limits that can be measured or observed, such as a temperature and time, never looks done.
  • 4. Establish monitoring, 5. corrective actions, 6. verification, and 7. record keeping.

Example: a cook probes each batch of chicken and writes the reading (monitoring). One batch reads low, so it goes back in the oven and the cause is fixed (corrective action, which covers both the food and the process). Each week the manager reviews the logs and checks thermometers against a reference (verification).

Validation is different: it shows up front that the chosen limits actually control the hazard. Specialized processes such as curing or smoking for preservation need a variance from the regulator and a written HACCP plan before starting. Reduced oxygen packaging of TCS food usually needs a HACCP plan, and a variance unless it meets the code's built-in criteria.

Check yourself

1. Each week a manager reviews the cooking logs, checks the probe thermometers against a reference thermometer, and confirms staff are following the plan as written. This activity is best described as which of the following?

2. A HACCP plan rests on basic programs that must already be working. Which of the following is such a prerequisite program?

Facts checked 2026-11-15 · Sources: FDA Food Code 2026 (full text), FDA: HACCP Principles and Application Guidelines

Food Manager cheat sheet: every key fact on one page →