Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Hazards, Contamination & Allergens0/4
    1. TCS food, the danger zone and high-risk guests
    2. Infection, intoxication and the toxins cooking cannot fix
    3. Chemical hazards, physical hazards and food defense
    4. Food allergens and cross-contact
  2. 2.Personal Hygiene & Employee Health0/4
    1. What employees must report and what the person in charge owes
    2. Exclude or restrict: matching the response to the illness
    3. Handwashing: how, where and when
    4. Gloves, bare-hand contact, jewelry and work habits
  3. 3.Purchasing, Receiving & Storage0/4
    1. Approved sources and the records that prove them
    2. Receiving: temperatures, condition and rejection
    3. Storage: shelf order, location and chemicals
    4. Date marking and first in, first out
  4. 4.Preparation, Cooking & Cooling0/4
    1. Safe preparation and approved thawing methods
    2. Cooking temperatures and how to verify them
    3. Raw and undercooked food: advisories, parasites and high-risk guests
    4. Cooling and reheating cooked food
  5. 5.Holding & Service0/4
    1. Hot holding, cold holding and reheating
    2. Using time instead of temperature
    3. Serving food and handling tableware
    4. Buffets, catering and vending machines
  6. 6.Facilities, Sanitation & Pests0/5
    1. Cleaning versus sanitizing
    2. Proving that sanitizing works
    3. Water supply, backflow and drains
    4. Equipment, building surfaces and chemical storage
    5. Pest control and garbage
  7. 7.Management Systems, HACCP & Inspections0/4
    1. Active managerial control and the person in charge
    2. HACCP plans and prerequisite programs
    3. Emergencies, illness complaints and recalls
    4. Inspections and staff training
Saved in this browser. Move it to another device →
← Holding & Service

Chapter 5 · Lesson 1 of 4

Hot holding, cold holding and reheating

1 min read

Under the FDA Food Code 2026, time/temperature control for safety (TCS) food is held at 135°F (57°C) or above, or at 41°F (5°C) or below, unless time is being used as the control.

Between those two numbers is the range where bacteria multiply fastest, so the manager's job is to keep food out of it and to know quickly when it slips in.

  • Steam tables, hot wells and holding cabinets are built to keep hot food hot. They heat slowly, so cold food set in them spends far too long in the danger range.
  • Food cooked, cooled and reheated for hot holding must reach 165°F (74°C) for 15 seconds, and the time between 41°F and that temperature may not exceed 2 hours. Commercially processed ready-to-eat food from a sealed package only needs 135°F (57°C).
  • A maximum checking interval is an outer limit. Checking more often catches a failing unit while the food can still be saved.

Example: a cook starts reheating chilled soup on the range at 3:10 p.m. It must reach 165°F by 5:10 p.m. If a pan on the line later reads low, look at the log.

A pan that was in range at the last recorded check may be reheated rapidly and returned; when nobody knows how long it was low, it is discarded. Look and smell tell you nothing about pathogens.

Check yourself

1. A pan of gravy on the hot line is found below the required holding temperature. The log shows it was checked and in range one hour earlier. Which factor determines whether it may be reheated and returned to service rather than discarded?

2. A cook opens a sealed, commercially processed can of ready-to-eat refried beans and heats the beans to go into a hot-holding well. To what minimum internal temperature must the beans be heated?

Facts checked 2026-11-15 · Sources: FDA Food Code 2026 (full text), FDA: Food Code

Food Manager cheat sheet: every key fact on one page →