Chapters0/29 ▾
- 1.Hazards, Contamination & Allergens0/4
- 2.Personal Hygiene & Employee Health0/4
- 3.Purchasing, Receiving & Storage0/4
- 4.Preparation, Cooking & Cooling0/4
- 5.Holding & Service0/4
- 6.Facilities, Sanitation & Pests0/5
- 7.Management Systems, HACCP & Inspections0/4
Chapter 6 · Lesson 4 of 5
Equipment, building surfaces and chemical storage
1 min read
Food-contact surfaces must be smooth, nonabsorbent, durable, corrosion-resistant, nontoxic and free of cracks and open seams, because a crack holds soil where detergent and sanitizer cannot reach.
Hard maple or a similar hard, close-grained wood is allowed for cutting boards; soft, open-grained wood is not. Copper may not touch acidic food such as vinegar dressing, wine or fruit juice. A cracked container is replaced, not kept for a less important job.
- Certified equipment still has to be installed so it can be cleaned: heavy floor units are sealed to the floor or raised on legs, and fixed units are spaced from walls or sealed to them.
- Lights over exposed food, clean equipment and single-service items are shielded, coated or shatter-resistant, because broken glass in open food cannot be picked out.
- A spray bottle filled from a bulk supply is labeled with the chemical's common name, and chemicals are stored below or away from food, equipment and single-service items, never above them.
Check yourself
1. A manager is replacing worn smallwares. Which item is acceptable as a food-contact surface?
2. During a self-inspection of the chemical storage area, which finding must the manager correct IMMEDIATELY?
Facts checked 2026-11-15 · Sources: FDA Food Code 2026 (full text), FDA: Food Code
Food Manager cheat sheet: every key fact on one page →