Chapters0/29 ▾
- 1.Hazards, Contamination & Allergens0/4
- 2.Personal Hygiene & Employee Health0/4
- 3.Purchasing, Receiving & Storage0/4
- 4.Preparation, Cooking & Cooling0/4
- 5.Holding & Service0/4
- 6.Facilities, Sanitation & Pests0/5
- 7.Management Systems, HACCP & Inspections0/4
Chapter 7 · Lesson 1 of 4
Active managerial control and the person in charge
1 min read
The FDA Food Code expects the person in charge to be a certified food protection manager, except in operations the regulatory authority judges to be minimal risk.
That person is responsible for active managerial control: the deliberate, everyday use of procedures that keep the known causes of foodborne illness in check. An operation that passes inspections but sees the same violations come back between visits is reacting, not controlling.
Effort goes first to the five risk factors identified by FDA and CDC: food from unsafe sources, inadequate cooking, improper holding temperatures, contaminated equipment, and poor personal hygiene.
The 2026 model code requires a written food safety management system within four years of the regulator adopting that code, used during all operating hours and shown to the regulator on request, except in operations judged minimal risk.
| Step in the cycle | Example |
|---|---|
| Monitoring | Testing the wiping-cloth sanitizer bucket |
| Corrective action | Dumping a weak solution and mixing a fresh one |
| Verification | Reviewing the logs to confirm checks are done |
| Retraining | Used when the same problem keeps repeating |
Self-inspections, ideally on a form modeled on the regulator's own, find and fix problems between official visits. They do not replace official inspections or change the standards. On the exam, an answer that waits for the inspector to point out a problem is almost never the best choice.
Check yourself
1. A food handler checks the sanitizer solution in a wiping-cloth bucket, finds the concentration below what the operation's procedure requires, and immediately empties the bucket and mixes a fresh solution. Emptying and remixing the solution is best classified as which part of the active managerial control cycle?
2. A regulatory inspector asks the person in charge to see the operation's food safety management system. Under the model code, what should the operation be able to produce?
Facts checked 2026-11-15 · Sources: FDA Food Code 2026 (full text), FDA: HACCP Principles and Application Guidelines
Food Manager cheat sheet: every key fact on one page →