Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Hazards, Contamination & Allergens0/4
    1. TCS food, the danger zone and high-risk guests
    2. Infection, intoxication and the toxins cooking cannot fix
    3. Chemical hazards, physical hazards and food defense
    4. Food allergens and cross-contact
  2. 2.Personal Hygiene & Employee Health0/4
    1. What employees must report and what the person in charge owes
    2. Exclude or restrict: matching the response to the illness
    3. Handwashing: how, where and when
    4. Gloves, bare-hand contact, jewelry and work habits
  3. 3.Purchasing, Receiving & Storage0/4
    1. Approved sources and the records that prove them
    2. Receiving: temperatures, condition and rejection
    3. Storage: shelf order, location and chemicals
    4. Date marking and first in, first out
  4. 4.Preparation, Cooking & Cooling0/4
    1. Safe preparation and approved thawing methods
    2. Cooking temperatures and how to verify them
    3. Raw and undercooked food: advisories, parasites and high-risk guests
    4. Cooling and reheating cooked food
  5. 5.Holding & Service0/4
    1. Hot holding, cold holding and reheating
    2. Using time instead of temperature
    3. Serving food and handling tableware
    4. Buffets, catering and vending machines
  6. 6.Facilities, Sanitation & Pests0/5
    1. Cleaning versus sanitizing
    2. Proving that sanitizing works
    3. Water supply, backflow and drains
    4. Equipment, building surfaces and chemical storage
    5. Pest control and garbage
  7. 7.Management Systems, HACCP & Inspections0/4
    1. Active managerial control and the person in charge
    2. HACCP plans and prerequisite programs
    3. Emergencies, illness complaints and recalls
    4. Inspections and staff training
Saved in this browser. Move it to another device →
← Management Systems, HACCP & Inspections

Chapter 7 · Lesson 4 of 4

Inspections and staff training

1 min read

Regulatory inspections are usually unannounced, and entry may not be refused; refusing can lead to suspension of the permit. Even in the middle of a rush and with the owner away, the person in charge admits the inspector, goes along on the walk-through, answers questions, takes notes and asks about anything unclear.

At the end, signing the report only acknowledges that it was received. It is not an admission, and refusing to sign changes nothing. The manager keeps a copy, fixes on the spot whatever can be fixed, and sets a timeline for the rest.

The person in charge must make sure employees are trained for their duties. Match the method to the need: a skill such as using a probe thermometer is taught at the station with demonstration, practice and feedback, while lectures, handouts and videos only pass on knowledge.

What turns training into daily habit is ongoing supervision, correction in the moment and periodic refreshers. Training records are still kept, but a signed sheet does not prove anyone can do the task.

Check yourself

1. The same cooling violation shows up in three consecutive self-inspections, and each time the affected food was discarded. What should the manager do next?

2. An inspector arrives unannounced during a busy lunch service and the owner is away. What should the person in charge do?

Facts checked 2026-11-15 · Sources: FDA Food Code 2026 (full text), FDA: HACCP Principles and Application Guidelines

Food Manager cheat sheet: every key fact on one page →