Chapters0/45 ▾
- 1.Intake & Write-Up0/4
- 2.Status, Invoice & Delivery0/4
- 3.Complaints & Professional Conduct0/4
- 4.Estimates & Prioritised Recommendations0/4
- 5.Communicating Value & Objections0/4
- 6.Vehicle Systems & Components0/4
- 7.Maintenance Schedules & Procedures0/4
- 8.Warranty, Bulletins & Recalls0/4
- 9.Vehicle Identification0/4
- 10.Workflow, Scheduling & Sublet0/5
- 11.Internal Communication & Quality0/4
Chapter 9 · Lesson 2 of 4
Production date and model year
1 min read
Under 49 CFR 567.4, the certification label states the manufacturer, the date of manufacture as a month and year, and the vehicle's weight ratings. It is fixed at the driver's seating position on the hinge pillar, door-latch post or door edge. A state inspection decal says nothing about when the vehicle was built.
A model year is a designation the manufacturer assigns to a production run, not the calendar year of assembly. Manufacturers often begin a new model year in the preceding autumn.
Example: a certification label reads 10/25, meaning October 2025, and the VIN decodes to model year 2026. The two agree; nothing was altered or misprinted. Record both, because coverage and maintenance schedules are usually written to model year, while recalls and part changes are often written to production date ranges.
That is also why being the right model year does not prove a vehicle is in a campaign. One model year spans production dates on both sides of a campaign breakpoint, so check the VIN against the campaign's covered-vehicle list. Delivery date and odometer reading are not eligibility tests.
In practice, when a recall or a parts lookup returns two possible answers for one model year, the build date on the certification label is often what separates them. Write it on the repair order alongside the model year so the parts counter and the warranty clerk see the same facts.
Check yourself
1. A vehicle's certification label shows a manufacture date in November, while its VIN decodes to the following year as the model year. How should the consultant read this?
2. A manufacturer campaign covers vehicles built between two stated dates. Where on the vehicle itself is the month and year of manufacture recorded?
Facts checked 2026-11-16 · Sources: ASE Automobile Service Consultant (C1) Study Guide 2026, 49 CFR Part 565: Vehicle Identification Number requirements, 40 CFR 86.1807-01: Vehicle labeling
ASE C1 Service Consultant cheat sheet: every key fact on one page →