Chapters0/45 ▾
- 1.Intake & Write-Up0/4
- 2.Status, Invoice & Delivery0/4
- 3.Complaints & Professional Conduct0/4
- 4.Estimates & Prioritised Recommendations0/4
- 5.Communicating Value & Objections0/4
- 6.Vehicle Systems & Components0/4
- 7.Maintenance Schedules & Procedures0/4
- 8.Warranty, Bulletins & Recalls0/4
- 9.Vehicle Identification0/4
- 10.Workflow, Scheduling & Sublet0/5
- 11.Internal Communication & Quality0/4
Chapter 3 · Lesson 2 of 4
Responding without blame or empty promises
1 min read
When a customer returns saying the problem is still there, apologize for the trouble and arrange for the vehicle to be checked.
An apology for the inconvenience is honest and costs nothing; it is not an admission that the shop was wrong, and it is not a denial either. Neither the cause nor the shop's responsibility is known at the counter.
- Do not blame the supplier or a technician who left; the customer bought the repair from the shop.
- Do not answer a request with only that is our policy; give a reason or an alternative.
- Do not promise to cover the repair whatever it turns out to be just to end a tense conversation.
The reason behind all three is the same: each one sounds calming in the moment but tells the customer the shop will not stand behind its work, or makes a promise that may not be honored. A broken promise becomes a second, larger complaint on top of the first.
If the remedy the customer wants is bigger than you are allowed to approve and the manager is out, tell the customer who must decide, gather the repair order and history for that person, and give a specific time for an answer.
That is a promise you can actually keep. Approving it yourself, or telling the customer to come back some other day, both fail the task. After a complaint is resolved, call later to confirm the fix held and note the call in the file.
Check yourself
1. The remedy a complaining customer demands is larger than the consultant is authorized to approve, and the manager will not be back for an hour. What should the consultant do?
2. A customer comes back saying the noise the shop was supposed to fix is still there. What is the consultant's best reply?
Facts checked 2026-11-16 · Sources: ASE Automobile Service Consultant (C1) Study Guide 2026, ASE C1 Automobile Service Consultant test page
ASE C1 Service Consultant cheat sheet: every key fact on one page →