Chapters0/45 ▾
- 1.Intake & Write-Up0/4
- 2.Status, Invoice & Delivery0/4
- 3.Complaints & Professional Conduct0/4
- 4.Estimates & Prioritised Recommendations0/4
- 5.Communicating Value & Objections0/4
- 6.Vehicle Systems & Components0/4
- 7.Maintenance Schedules & Procedures0/4
- 8.Warranty, Bulletins & Recalls0/4
- 9.Vehicle Identification0/4
- 10.Workflow, Scheduling & Sublet0/5
- 11.Internal Communication & Quality0/4
Chapter 4 · Lesson 1 of 4
Prioritizing inspection results
1 min read
The customer's original concern is why the vehicle is in the shop, so the call opens with what the technician found on that concern and what correcting it involves. Other findings follow in priority order.
The ASE study guide includes a sample inspection list of this kind: its keyed order puts brake lining worn to 1 mm first and rusted transmission cooler lines second, ahead of routine maintenance.
| Priority | What belongs there |
|---|---|
| 1. Safety | Items at or below the manufacturer's minimum that affect stopping, steering or traction |
| 2. Further damage or breakdown | Leaking or corroded lines and similar conditions that can lead to a breakdown |
| 3. Maintenance due | Items the schedule calls for now |
| 4. Monitor | Within specification but worth checking at each visit |
| No action | Serviced at the last visit and measuring good today |
Example: a car is in for a scheduled service. The sheet shows rear brake lining below the minimum, a coolant test that failed, the oil past its interval, and an engine air filter replaced last visit that is still clean.
Present the brakes first, then the oil that is past its interval, then the coolant service, and make no recommendation on the air filter. If the customer can afford only one item, recommend the safety item.
Exam lists can look busy, so sort before you rank. First cross out anything that needs no action. Then find anything at or below a manufacturer minimum that affects how the car stops or steers. Everything else falls into damage risk, scheduled maintenance, or monitor.
Check yourself
1. A technician turns in this inspection result on a vehicle brought in for an oil change: - Front brake pads measure 2 mm; the manufacturer's minimum is 3 mm - Coolant tested with poor freeze protection and high acidity - Engine oil is due at 5,000 miles and the odometer reads 5,300 - Cabin air filter was replaced at the last visit and is still clean In what order should the consultant present the recommendations?
2. A technician turns in these findings on a vehicle brought in for a scheduled service: - Left rear tire tread is worn down to the molded wear indicator - A transmission cooler line is rusted and weeping - Engine oil is 800 miles past the sticker interval - Battery terminals show light corrosion The customer says she is in a hurry and will come back another day for anything found. Which finding must still be raised before she leaves?
Facts checked 2026-11-16 · Sources: ASE Automobile Service Consultant (C1) Study Guide 2026, ASE C1 Automobile Service Consultant test page
ASE C1 Service Consultant cheat sheet: every key fact on one page →