Chapters0/45 ▾
- 1.Intake & Write-Up0/4
- 2.Status, Invoice & Delivery0/4
- 3.Complaints & Professional Conduct0/4
- 4.Estimates & Prioritised Recommendations0/4
- 5.Communicating Value & Objections0/4
- 6.Vehicle Systems & Components0/4
- 7.Maintenance Schedules & Procedures0/4
- 8.Warranty, Bulletins & Recalls0/4
- 9.Vehicle Identification0/4
- 10.Workflow, Scheduling & Sublet0/5
- 11.Internal Communication & Quality0/4
Chapter 1 · Lesson 2 of 4
Customer, vehicle and payer information
1 min read
A repair order can look complete and still stall the job. The most damaging gap is a missing or unconfirmed phone number or preferred contact method: the moment the technician finds work beyond what was approved, the job stops until the customer is reached.
The odometer must be read from the vehicle, not copied from the last visit, because maintenance intervals and mileage-limited coverage both depend on the real reading.
Identify the customer type and the source of payment at write-up. The rule is that authorization comes from whoever pays. On a fleet vehicle that is the fleet account, through a purchase order or authorization number, not the driver holding the keys.
On extended service contract work the contract administrator must approve the covered repair before it is performed, not after.
| Customer type | Who authorizes before work starts |
|---|---|
| Retail customer paying the bill | The customer, for specific work at a stated price |
| Fleet vehicle | The fleet account, by purchase order or authorization number |
| Extended service contract | The contract administrator, before the repair |
Pull the service history before the interview. Past repairs, items still under a parts or labor warranty, and recommendations the customer declined all change what you should recommend and who is billed. A declined item answers one visit only: raise it again with what today's inspection shows and let the customer decide again.
Check yourself
1. A driver delivers a van that belongs to a company fleet account and asks for a repair. Before the work begins, the consultant must:
2. A vehicle is apart for an authorized repair when the technician finds a second failed part that comes out through the same opening. What does the consultant do?
Facts checked 2026-11-16 · Sources: ASE Automobile Service Consultant (C1) Study Guide 2026, ASE C1 Automobile Service Consultant test page
ASE C1 Service Consultant cheat sheet: every key fact on one page →