Chapters0/28 ▾
- 1.General Medical Knowledge & History0/4
- 2.Visual Acuity, Pupils & Motility0/4
- 3.Tonometry, Visual Fields & Biometry0/4
- 4.Refraction, Lensometry & Optics0/4
- 5.Ophthalmic Imaging & Photography0/4
- 6.Pharmacology, Microbiology & Surgical Assisting0/4
- 7.Patient Services, Equipment & Ethics0/4
Chapter 4 · Lesson 3 of 4
Lensometry: reading glasses and prism
1 min read
Before any reading, focus the eyepiece: turn it to full plus, then back until the reticle crosshairs are crisp. Skipping this lets your own accommodation shift every sphere reading in the same direction. For a spherocylindrical lens, each principal meridian brings one set of mires into focus at its own drum setting.
The first reading is the sphere, the difference between the two is the cylinder, and the axis is read where the lines are sharp. Example: one set focuses at -1.00 and the other at -2.50, so the sphere is -1.00 and the cylinder is -1.50.
- Bifocal add: turn the glasses around so the front surface rests on the stop, read the distance portion and then the segment, and take the difference. Example: +1.25 and +3.25 give an add of +2.00.
- Progressive lenses never give one sharp focus as you move down, because power changes continuously; use the engravings and the marked reference circles.
- Prentice's rule: prism diopters equal decentration in centimeters times power. A -6.00 D lens decentered 3 mm (0.3 cm) induces 0.3 x 6.00 = 1.8 prism diopters.
Check yourself
1. A lens is +4.00 D and its optical center sits 5 mm from the patient's line of sight. By Prentice's rule, the induced prism is:
2. At the lensmeter one set of mires focuses at one drum setting and the second set at another. The cylinder power is:
Facts checked 2026-11-15 · Sources: IJCAHPO: Certified Ophthalmic Assistant (COA) certification and exam content areas, AAO EyeWiki: Retinoscopy, AAO EyeWiki: Lensometry
Ophthalmic Assistant (COA) cheat sheet: every key fact on one page →