Chapters0/28 ▾
- 1.General Medical Knowledge & History0/4
- 2.Visual Acuity, Pupils & Motility0/4
- 3.Tonometry, Visual Fields & Biometry0/4
- 4.Refraction, Lensometry & Optics0/4
- 5.Ophthalmic Imaging & Photography0/4
- 6.Pharmacology, Microbiology & Surgical Assisting0/4
- 7.Patient Services, Equipment & Ethics0/4
Chapter 5 · Lesson 1 of 4
Fluorescein angiography: filters, phases and what the frames show
1 min read
Fluorescein glows when blue light hits it and gives off yellow-green light. The camera's exciter filter sends blue light into the eye, and the barrier filter in front of the sensor lets only the yellow-green glow through, so reflected blue light does not wash out the picture.
Before any dye is injected, the photographer takes color and red-free (green-filtered) photos. Blood and pigment look dark in red-free light, and these frames are the control that shows whether later brightness is true fluorescence or was there before the dye.
The dye arrives in a fixed order: a patchy choroidal flush, then the retinal arteries, then the arteriovenous phase with streams of dye along the vein walls, then full venous filling, and finally the late frames after the dye recirculates. Bright areas are named by how they change over time.
| Pattern | Early | Late |
|---|---|---|
| Leakage | Small and faint | Larger, brighter, blurred edges |
| Window defect | Bright | Fades, same size |
| Staining | Dim | Brighter, fixed borders |
Example: a spot is barely visible at 30 seconds and at 8 minutes it has doubled in size with fuzzy edges. Only leakage both grows and brightens, so that is the mechanism.
Check yourself
1. On an angiogram, an area of hyperfluorescence is small and faint early, then becomes larger and brighter with blurred margins on the late frames. Which mechanism does this describe?
2. Why are color and red-free (green-filtered) fundus photographs taken before the fluorescein is injected?
Facts checked 2026-11-15 · Sources: IJCAHPO: Certified Ophthalmic Assistant (COA), AAO EyeWiki: Fluorescein Angiography, FDA label: Fluorescite (fluorescein injection)
Ophthalmic Assistant (COA) cheat sheet: every key fact on one page →