Chapters0/23 ▾
Chapter 1 · Lesson 4 of 5
Diffusion, the membrane and clearance
1 min read
Diffusion is the movement of a solute from the side where it is more concentrated to the side where it is less concentrated. Fresh dialysate contains no urea, so urea keeps moving out of the blood.
The same principle runs in reverse for buffer: dialysate buffer is more concentrated than the patient's, so it diffuses into the blood while acid moves out. That is how the acidosis of kidney failure is corrected, not by heat or pressure.
The dialyzer membrane is semipermeable. Its pores let water and small solutes such as urea pass but hold back blood cells and large proteins such as albumin. Separation depends on molecule size compared with pore size, not on electric charge or pumping.
Blood and dialysate flow in opposite directions (countercurrent) so that blood always meets dialysate that holds less waste, and a concentration gradient exists along the whole fiber. If both streams ran the same way they would even out partway along and clearance would fall.
- Raises clearance: larger membrane surface area, higher blood flow rate, longer treatment, countercurrent flow.
- Lowers clearance: slower blood flow, shorter treatment, same-direction flow.
Check yourself
1. During hemodialysis, urea moves from the patient's blood into the dialysate. What drives that movement?
2. Blood and dialysate are run through the dialyzer in opposite directions. What is the reason for this design?
Facts checked 2026-11-15 · Sources: NNCC: Certified Clinical Hemodialysis Technician (CCHT), 42 CFR Part 494: Conditions for Coverage for ESRD Facilities
Dialysis Technician cheat sheet: every key fact on one page →