Chapters0/30 ▾
- 1.Asepsis & Sterile Technique0/5
- Where sterile ends: gowns, tables, movement and the prep
- Breaks in technique: strike-through, glove punctures and wound class
- Judging packages, trays and solutions before they reach the field
- Reading sterilization indicators and biological results
- Cleaning first, Spaulding, and choosing a sterilization method
- 2.Instrumentation & Sutures0/5
- 3.Surgical Procedures0/5
- 4.Patient Safety & Counts0/5
- 5.Professional Practice0/5
- Informed consent: who explains, who witnesses, who may sign
- Roles, scope of practice and owning your errors
- Documentation: count records, corrections and occurrence reports
- Legal doctrines: negligence, res ipsa loquitur, respondeat superior, battery and abandonment
- Privacy, do-not-resuscitate orders and advance directives
- 6.Basic Science0/5
Study guide · Chapter 4 of 6
Patient Safety & Counts Study Guide — Surgical Technologist (CST)
39 free practice questions
This part of the CST exam is about keeping the patient safe from the most preventable harms in surgery: the wrong site, a retained item, a positioning injury, a burn or fire, and an unidentified drug. Questions usually describe one moment and ask what the team does first. Exact count procedures and documentation follow your facility's policy, but the principles below are what the exam tests.
Key takeaways
- Any mismatch during the time out stops the case until it is resolved, and the site is marked by the person who will operate, with the patient awake and involved.
- Sponges and sharps are counted at four points and instruments at two routine points, plus a count at any permanent relief of the scrub or circulator, aloud and together by the technologist and the circulator.
- When a count is wrong, the surgeon is told first, and if the item is not found an x-ray is taken and read by a radiologist before the wound is closed.
- Keep the arm under 90 degrees with the palm up, pad the fibular head in lithotomy, and clip hair close to the time of surgery.
- Rising end-tidal carbon dioxide is the earliest sign of malignant hyperthermia, and a fire on the patient is fought by stopping the gases and removing the burning material.
Lessons in this chapter
5 short lessons · 5 min read
- 1Right patient, right site, right drug, right specimen1 min
- 2Surgical counts: when, what and how1 min
- 3When the count is wrong or cannot be done1 min
- 4Positioning injuries, hair removal and prep pooling1 min
- 5Electrosurgery, fire, lasers, malignant hyperthermia and needlesticks1 min
Facts checked 2026-11-15 · Sources: NBSTSA: Surgical Technologist Certifying Examination Content Outline, Association of Surgical Technologists: Standards of Practice, OSHA: Bloodborne Pathogens Standard, 29 CFR 1910.1030
Surgical Technologist (CST) cheat sheet: every key fact on one page →Next chapter: Professional Practice →Practice tests
Practice questions based on the NBSTSA Certified Surgical Technologist exam content outline, AST standards of practice, and durable operating-room principles. CST is a mark of the National Board of Surgical Technology and Surgical Assisting; this site is not affiliated with or endorsed by NBSTSA or AST. Surgical counts, documentation, and what a technologist may perform are governed by your facility's policy and by state law, and sterilization parameters follow the manufacturer's written instructions — confirm all of these locally rather than from a practice test, and confirm current eligibility and exam requirements with the certifying board. About the CST exam →