Chapters0/22 ▾
Chapter 5 · Lesson 1 of 5
Crew resource management and visual observers
1 min read
Crew resource management (CRM) is part of aeronautical decision-making. It means using every resource you have to make a safe decision, and the study guide sorts those resources into three groups.
- Human: the visual observer, the person on the controls, and ground personnel.
- Hardware: the aircraft, the control station and its displays.
- Information: site surveys, charts, NOTAMs and weather.
CRM is not just a preflight briefing. It continues in flight, when hazards actually appear, and in a debrief afterward that feeds lessons back into your procedures.
A visual observer adds safety only if they can actually see the aircraft well enough to judge its location, altitude, attitude and direction, and only if their callouts reach the pilot reliably. Agree on the words and the method, such as voice, headset or hand signals, before launch.
Example: during a roof inspection the observer calls out a flock of birds, the telemetry shows the battery at 35 percent, and the site plan shows a crane to the north. Weighing all three before choosing a return path is CRM in action.
Check yourself
1. During a two-person mapping flight, the remote pilot in command combines the visual observer's callouts, the control station's telemetry readout, and the site's obstacle survey to decide when to break off a pass. This is the clearest illustration of which concept?
2. You are the remote pilot in command of a crew that includes one visual observer and a separate person manipulating the controls. Which arrangement best reflects sound crew practice?
Facts checked 2026-11-16 · Sources: FAA-G-8082-22: Remote Pilot Small Unmanned Aircraft Systems Study Guide, FAA-S-ACS-10B: Remote Pilot Small UAS Airman Certification Standards
FAA Part 107 Drone Pilot cheat sheet: every key fact on one page →