Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/22 ▾
← Airspace & Sectional Charts

Chapter 2 · Lesson 4 of 4

Airports, runways and traffic patterns

1 min read

On a sectional, an airport with a control tower and its data are printed in blue; all other airports are magenta. Color tells you about the tower, not about the runway surface or who owns the field.

Symbol shape tells you about the runway: a plain open circle means the runways are not hard-surfaced, while a drawn runway outline means a hard-surfaced runway.

Runway numbers come from the magnetic heading rounded to the nearest 10 degrees with the last zero dropped. Runway 04 points about 040 degrees magnetic, and the opposite end is Runway 22, about 220 degrees. Knowing this tells you where airplanes will line up on final approach and climb out after takeoff.

Unless a chart or publication says otherwise, traffic patterns use left turns. Aircraft on final fly down the extended runway centerline, so a drone near the end of a runway is in their path.

Under §107.37 you yield: descend and move off the centerline rather than holding position. Chart positions use latitude, measured north or south of the equator, and longitude, measured east or west of the prime meridian.

Check yourself

1. An airport has a runway designated "31". What does that number tell a remote pilot?

2. A public-use airport is charted as a plain open circle with no runway pattern drawn inside it. What does this symbol mean?

Facts checked 2026-11-16 · Sources: FAA Aeronautical Chart User's Guide, FAA Aeronautical Information Manual (AIM), Chapter 3: Airspace, 14 CFR Part 107: Small Unmanned Aircraft Systems (eCFR)

FAA Part 107 Drone Pilot cheat sheet: every key fact on one page →