Chapters0/22 ▾
Chapter 4 · Lesson 4 of 4
Lithium batteries and energy planning
1 min read
Most small drones fly on lithium-polymer packs, and the exam tests how they behave and how they fail.
- Cold slows the chemistry and raises internal resistance, so usable capacity and voltage under load drop and flights get shorter. Plan a bigger reserve and follow the maker's temperature guidance.
- Voltage sag: under heavy current the voltage drops and then recovers when the load eases, so a reading at low power overstates what is left for a hard climb or an upwind leg.
- A swollen, dented or punctured pack has internal damage and can go into thermal runaway. Remove it from service and dispose of it per the manufacturer; never charge, fly or puncture it.
- Charge while someone is watching, at the manufacturer's rate, on a non-flammable surface, and never in a hot vehicle.
Wind changes the energy needed for a round trip because the drone flies through moving air. Example: a survey point 1.2 nautical miles away, a 30-knot airspeed and a 10-knot wind.
Going out with the tailwind at 40 knots takes 1.8 minutes; coming back into the wind at 20 knots takes 3.6 minutes. That is 5.4 minutes in all, compared with 4.8 minutes in calm air, so the tailwind and headwind do not cancel out. Plan the bigger reserve for the trip home.
Check yourself
1. A small UA flies out to a survey point with a strong tailwind and must return into the wind. How should the remote pilot plan the battery reserve?
2. How does operating in cold temperatures typically affect a lithium-polymer battery used in a small UAS?
Facts checked 2026-11-16 · Sources: FAA-H-8083-25: Pilot's Handbook of Aeronautical Knowledge (Ch. 5 and 11), FAA-G-8082-22: Remote Pilot Small Unmanned Aircraft Systems Study Guide, FAA-S-ACS-10B: Remote Pilot Small UAS Airman Certification Standards
FAA Part 107 Drone Pilot cheat sheet: every key fact on one page →