Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/22 ▾
← Airspace & Sectional Charts

Chapter 2 · Lesson 1 of 4

Airspace classes and when you need authorization

1 min read

Under 14 CFR 107.41 you need ATC authorization before flying in Class B, C or D airspace, or inside the surface area of Class E airspace designated for an airport.

The authorization must be in hand before launch; a radio call during the flight does not count. Everything else in the low altitudes is either Class G or Class E that begins well above you, and needs no authorization.

Chart depictionAirspaceAuthorization?
Solid blue ringsClass BYes
Solid magenta ringsClass CYes
Dashed blue lineClass DYes
Dashed magenta lineClass E from the surfaceYes
Faded magenta bandClass E from 700 feet AGLNo, below it is Class G
Faded blue bandClass E from 1,200 feet AGLNo, below it is Class G

Class G is uncontrolled and has no line of its own; you find it by the absence of any controlled airspace symbol. Class A runs from 18,000 feet MSL up to flight level 600, has no lateral outline on the chart, and is far above any Part 107 flight.

Check yourself

1. A remote pilot plans to fly at a non-towered airport that is enclosed on the sectional chart by a dashed magenta line. What does this depiction require?

2. On a sectional chart, a wide faded magenta band (a vignette) surrounds an area. What does the inside edge of that band indicate?

Facts checked 2026-11-16 · Sources: FAA Aeronautical Chart User's Guide, FAA Aeronautical Information Manual (AIM), Chapter 3: Airspace, 14 CFR Part 107: Small Unmanned Aircraft Systems (eCFR)

FAA Part 107 Drone Pilot cheat sheet: every key fact on one page →