Quibank app: now on the App Store — free, works offline. Get the app ↗

22 Safety, PPE, SCBA & Communications Practice Questions & Answers

Every Safety, PPE, SCBA & Communications practice question from the Firefighter I & II Certification Practice Test, with the correct answer and a short explanation.

Start practice test →
  1. 1. Two firefighters are about to enter a burning house for an interior attack in an IDLH atmosphere. Under OSHA's respiratory protection standard, how many properly equipped firefighters must remain outside, ready to rescue them?

    • A.At least three
    • B.At least two✓ Answer
    • C.At least four
    • D.At least one

    OSHA 29 CFR 1910.134(g)(4) requires that, for interior structural firefighting in an IDLH atmosphere, at least two firefighters enter together and stay in visual or voice contact, and at least two more stay outside, equipped and ready for immediate rescue. A single outside member could not safely go in alone to rescue, and 'four' confuses the outside pair with the four-person minimum total.

    Ref QB-J4VNN5Source: OSHA 29 CFR 1910.134(g)(4) — procedures for interior structural firefighting (two-in/two-out)Report a problem with this question

  2. 2. A three-person engine company arrives first at a house fire. A resident is visible at a first-floor window, and the crew can reach her before any other unit arrives. What does OSHA's two-in/two-out rule allow the crew to do?

    • A.Begin the rescue only after an exterior knockdown
    • B.Begin the rescue under the imminent-life-threat exception✓ Answer
    • C.Wait outside until a fourth firefighter is on scene
    • D.Enter only after a rapid intervention crew is named

    OSHA's two-in/two-out rule does not apply when firefighters act to save a person in imminent, life-threatening danger before the full team can be assembled. Waiting for a fourth member is the normal rule that this exception sets aside, and neither an exterior knockdown nor a named rapid intervention crew is a precondition the standard imposes.

    Ref QB-ZKB6W3Source: OSHA 29 CFR 1910.134(g)(4), Note 2 — rescue exception before the team is assembledReport a problem with this question

  3. 3. Which statement about the two firefighters who stay outside under OSHA's two-in/two-out rule is correct?

    • A.One may also act as incident commander.✓ Answer
    • B.Both must be officers holding command rank.
    • C.Both may leave once the crew radios in.
    • D.One may join the crew inside to help attack.

    OSHA allows one of the two outside members to take on another role, such as incident commander or safety officer, as long as that duty does not keep that member from performing or assisting a rescue. The standard does not require command rank, and the outside pair cannot leave or join the interior attack, because their purpose is to stand by for rescue the entire time the crew is inside.

    Ref QB-H4HBG4Source: OSHA 29 CFR 1910.134(g)(4), Note 1 — one outside member may be assigned as incident commander or safety officerReport a problem with this question

  4. 4. Midway through an interior operation, the incident commander requests a PAR (personnel accountability report) from all crews. What is each company officer confirming?

    • A.That a rapid intervention crew is now in place
    • B.That the crew's air cylinders have been refilled
    • C.That every assigned crew member is accounted for✓ Answer
    • D.That the crew has finished its assigned task

    A PAR is a roll call in which each company officer confirms that every member assigned to the crew is present and accounted for. It is requested at set intervals, after major changes such as an evacuation, or after a mayday, so command can quickly detect a missing firefighter; it says nothing about air refills, task status or rapid intervention staffing.

    Ref QB-YKYTQ2Source: NFPA 1500 (now consolidated into NFPA 1550, 2024) — personnel accountability system; personnel accountability report (PAR)Report a problem with this question

  5. 5. While searching a smoke-filled floor, a firefighter loses contact with the wall and the hoseline and realizes they do not know the way out. When should they call a mayday?

    • A.As soon as they realize they are lost✓ Answer
    • B.When their PASS goes into full alarm
    • C.After a few minutes of searching alone
    • D.Once their low-air alarm starts sounding

    Being lost or disoriented is itself a mayday trigger, so the call should go out the moment the firefighter realizes it. Calling early gives rescuers the most air time and search time to work with; waiting for the low-air alarm, the PASS full alarm or a few minutes of solo searching burns the very reserve a rescue depends on.

    Ref QB-G46ZA3Source: NFPA 1010 (2024) Ch. 6, Fire Fighter I — activate an emergency call for assistance (mayday triggers)Report a problem with this question

  6. 6. A disoriented firefighter has just called a mayday and still has air in the cylinder. Which next action best helps rescuers locate the firefighter while they work toward an exit?

    • A.Run toward the area where the smoke looks lighter
    • B.Stay still and stop all radio contact to save air
    • C.Activate the PASS and follow a wall or hoseline✓ Answer
    • D.Remove the facepiece and breathe near the floor

    Manually activating the PASS gives rescuers a loud signal to home in on, and following a wall or hoseline is a systematic way to reach a door or window while the firefighter controls breathing. Removing the facepiece exposes the firefighter to toxic gases, running blind risks falls and wastes air, and cutting off radio contact leaves rescuers without updates on the firefighter's location and condition.

    Ref QB-3DK5KUSource: NFPA 1010 (2024) Ch. 6, Fire Fighter I — self-survival actions when disoriented (PASS activation, wall/hoseline orientation)Report a problem with this question

  7. 7. Conditions are deteriorating, and the incident commander needs every crew to stop interior work and leave the building. Which type of radio message is this?

    • A.An emergency traffic announcement✓ Answer
    • B.A routine progress report to dispatch
    • C.A mayday transmission to all crews
    • D.A personnel accountability report

    Emergency traffic is a priority message, usually from command, that affects everyone on the incident, such as an evacuation order, and it clears the channel for that message. A mayday is reserved for a firefighter who is lost, trapped or in trouble, a PAR is a headcount, and a routine progress report has no priority over other traffic.

    Ref QB-F4TN52Source: NFPA 1500 (now in NFPA 1550, 2024) — emergency traffic vs. mayday; NFPA 1010 (2024) Ch. 6, Fire Fighter I — communicationsReport a problem with this question

  8. 8. A trapped firefighter keys the radio and says 'Mayday, Mayday, Mayday.' What information should the report give next?

    • A.His entry time, tasks completed and crew size
    • B.His badge number, rank, shift and years on the job
    • C.The fire's size, smoke color, wind and exposures
    • D.His location, unit, name, air supply and needs✓ Answer

    After the mayday call, the firefighter must tell rescuers where they are, who they are and what they need; many departments teach this as LUNAR (location, unit, name, assignment or air, resources needed). Badge numbers, size-up details and a timeline of earlier tasks do not help a rapid intervention crew find and free the firefighter.

    Ref QB-6M4UR9Source: NFPA 1010 (2024) Ch. 6, Fire Fighter I — activate an emergency call for assistance (mayday report content)Report a problem with this question

  9. 9. A firefighter needs to transmit an important message on a portable radio. Which technique gives the clearest transmission?

    • A.Start talking at the same moment you press the key
    • B.Press the button and pause briefly before talking✓ Answer
    • C.Talk fast so the channel opens up for other crews
    • D.Shout so the message carries through the facepiece

    Most radio systems, especially trunked systems, need a moment after the button is pressed before they actually transmit, so pausing keeps the first words from being cut off. Talking fast makes the message hard to understand and often forces a repeat, and shouting distorts the audio instead of making it clearer.

    Ref QB-P4AZBASource: NFPA 1010 (2024) Ch. 6, Fire Fighter I — transmit and receive radio messages (radio discipline)Report a problem with this question

  10. 10. A firefighter on Engine 2 needs to reach the incident commander, whose radio designation is 'Command.' Which opening follows standard radio format?

    • A.“This is Engine 2, go ahead.”
    • B.“Engine 2 to anyone on scene.”
    • C.“Engine 2, this is Command.”
    • D.“Command, this is Engine 2.”✓ Answer

    Standard radio format names the unit being called first and then identifies the caller, so the receiver hears its own designation and knows the message is for it. Reversing the order would mean Command is calling Engine 2, opening with 'this is' names no receiver, and an open call to anyone on scene does not reach the intended officer.

    Ref QB-M57PXFSource: NFPA 1010 (2024) Ch. 6, Fire Fighter I — transmit and receive radio messages (receiving unit, then sending unit)Report a problem with this question

  11. 11. Listed from the outside in, which three layers make up a structural firefighting coat?

    • A.Outer shell, thermal liner, moisture barrier
    • B.Reflective shell, thermal liner, cotton lining
    • C.Outer shell, foam padding, moisture barrier
    • D.Outer shell, moisture barrier, thermal liner✓ Answer

    The outer shell resists flame, cuts and abrasion; the moisture barrier beneath it blocks water, steam and many liquids; and the thermal liner closest to the body provides most of the insulation. Reversing the inner two layers is a common mix-up, reflective shells belong to proximity gear, and foam padding is not one of the three required layers.

    Ref QB-4NZGCFSource: NFPA standard on structural protective ensembles (NFPA 1971, now NFPA 1970) — garment composite: outer shell, moisture barrier, thermal barrierReport a problem with this question

  12. 12. During a routine inspection, a firefighter finds that their turnout coat is in good condition but was manufactured 11 years ago. What should happen to the coat?

    • A.Remove it from service and retire it✓ Answer
    • B.Reassign it for use in live-fire training
    • C.Keep it after a full advanced cleaning
    • D.Keep it in service if it passes inspection

    The NFPA standard on selection, care and maintenance of structural PPE requires that garments be retired no more than 10 years after their date of manufacture, regardless of how they look, because heat, UV light and laundering degrade materials in ways inspection cannot reveal. Passing inspection or cleaning does not reset that limit, and live-fire training still exposes the wearer to real heat.

    Ref QB-N5JZ4HSource: NFPA 1851, now consolidated into NFPA 1850 (standard on selection, care and maintenance of structural PPE) — retirement no more than 10 years from date of manufactureReport a problem with this question

  13. 13. Apart from any time damage is suspected, how often must structural turnout gear receive an advanced inspection under the NFPA standard on its care and maintenance?

    • A.At least once every 12 months✓ Answer
    • B.At least once every 3 years
    • C.Only after a product recall
    • D.Only after an interior fire

    Under the NFPA standard on care and maintenance of structural PPE, a routine inspection follows every use, and a trained person must perform an advanced inspection at least every 12 months or whenever damage is suspected. A 3-year interval is far too long, and recalls or interior fires are reasons for extra checks, not the required schedule.

    Ref QB-5NCUHGSource: NFPA 1851, now consolidated into NFPA 1850 (standard on selection, care and maintenance of structural PPE) — advanced inspection at least every 12 monthsReport a problem with this question

  14. 14. A crew has just finished an interior attack, and their gear is covered in soot. What should they do before leaving the scene to reduce carcinogen exposure?

    • A.Ride back in their gear and wash it at the station
    • B.Keep hoods on until the crew returns to quarters
    • C.Do gross decon on scene and bag the gear for transport✓ Answer
    • D.Shake off the soot and hang the gear in the cab

    Field reduction of contaminants (gross decon) means brushing and rinsing gear on scene, ideally while still on air, then removing it, bagging it and keeping it out of the crew cab. This removes much of the soot before it can be absorbed through the skin or carried into the cab and station; wearing or hanging dirty gear in the cab, or leaving a soiled hood on, prolongs carcinogen exposure.

    Ref QB-J5GZKDSource: NFPA 1010 (2024) Ch. 6, Fire Fighter I — field reduction of contaminants; NFPA 1851 (now NFPA 1850) — preliminary exposure reductionReport a problem with this question

  15. 15. Under the 2013 edition of NFPA 1981, the standard for SCBA (self-contained breathing apparatus), at about what percentage of rated cylinder pressure must the end-of-service-time indicator activate?

    • A.33 percent✓ Answer
    • B.25 percent
    • C.10 percent
    • D.50 percent

    The 2013 edition of NFPA 1981 raised the end-of-service-time indicator activation point from 25% to 33% of rated pressure to leave more air for getting out. 25% is the older NFPA value and still the NIOSH minimum, while 50% and 10% are not alarm points in either standard. NFPA 1981 has since been consolidated into NFPA 1970 (2025 edition), and later editions may set a different alarm point, so check the standard your department's SCBA is certified to.

    Ref QB-2NAUZCSource: NFPA 1981 (2013 edition) — end-of-service-time indicator at 33% of rated pressure; consolidated into NFPA 1970 (2025)Report a problem with this question

  16. 16. During the start-of-shift SCBA check, what is the minimum cylinder pressure, as a share of rated pressure, for the unit to be considered ready for service?

    • A.100 percent
    • B.50 percent
    • C.75 percent
    • D.90 percent✓ Answer

    Fire service training and state skill sheets treat an SCBA as ready only when its cylinder holds at least 90% of rated pressure; anything lower is swapped or refilled before the unit goes back in service. Requiring exactly 100% ignores normal pressure changes with temperature, and 75% or 50% would send firefighters in with too little air.

    Ref QB-K5UBSESource: IFSTA Essentials of Fire Fighting, 8th ed. — SCBA daily inspection (cylinder at least 90% of rated pressure); NFPA 1010 (2024) Ch. 6, Fire Fighter I — SCBA inspection and readiness checkReport a problem with this question

  17. 17. Under the Rule of Air Management, when should a firefighter working in an IDLH atmosphere leave the hazard area?

    • A.When the cylinder gauge reads empty
    • B.Before the low-air alarm activates✓ Answer
    • C.As soon as the low-air alarm sounds
    • D.After the assigned task is finished

    The Rule of Air Management says firefighters should leave the IDLH atmosphere before the low-air alarm activates, so the alarm serves as a backup rather than the cue to start exiting. If the alarm sounds while the firefighter is still inside, the air plan has already failed; waiting for an empty gauge or for the task to be finished ignores how long the exit may take.

    Ref QB-3NN67ESource: NFPA 1404 (being consolidated into NFPA 1400) — air management: exit the IDLH atmosphere before the low-air alarm activates; NFPA 1010 (2024) Ch. 6, Fire Fighter I — SCBA useReport a problem with this question

  18. 18. A carbon-fiber composite SCBA cylinder labeled with a 15-year service life has just passed its hydrostatic test, but it was manufactured 15 years ago. What is its status?

    • A.It may remain in service 3 more years
    • B.Its service ends only if a test is failed
    • C.It must now be taken out of service✓ Answer
    • D.It may remain in service 10 more years

    Fully wrapped carbon-fiber composite cylinders are hydrostatically tested every 5 years, and one labeled for a 15-year service life must be retired when it reaches that age; passing a hydrostatic test does not extend that life. The 'use it until it fails a test' approach applies to steel and aluminum cylinders, which have no fixed service life. Some newer composite designs are rated for 30 years, which is why the label matters.

    Ref QB-R5MZMMSource: U.S. DOT/PHMSA DOT-CFFC basic requirements and special permits — 5-year hydrostatic test, 15-year service life from manufacture (extensions only by separate PHMSA approval)Report a problem with this question

  19. 19. While working inside, a firefighter's SCBA regulator suddenly stops delivering enough air to the facepiece. Which SCBA control should the firefighter use to get air while exiting?

    • A.The cylinder's pressure-relief disk
    • B.The regulator's bypass (purge) valve✓ Answer
    • C.The harness quick-release buckle
    • D.The PASS device's manual alarm button

    The bypass (purge) valve routes air from the first-stage reducer directly to the facepiece, going around a failed second-stage regulator; the firefighter opens it as needed to breathe, closes it between breaths to save air, and exits immediately. The pressure-relief disk is a passive safety vent, the harness buckle only releases the pack, and the PASS signals for help but supplies no air.

    Ref QB-8NEU2MSource: NFPA 1010 (2024) Ch. 6, Fire Fighter I — SCBA emergency procedures (bypass/purge valve)Report a problem with this question

  20. 20. A firefighter's PASS (personal alert safety system) device sounds a pre-alarm and then a full alarm without anyone pressing a button. What triggers this automatic alarm?

    • A.The wearer's heart rate climbs too high
    • B.The radio loses contact with dispatch
    • C.The wearer stays motionless for a set time✓ Answer
    • D.The cylinder falls to its low-air setting

    A PASS has a motion sensor: if the wearer does not move for a set period it gives a pre-alarm, and if there is still no movement it goes into full alarm so crews can locate a downed firefighter; it can also be activated manually. Low cylinder pressure triggers the end-of-service-time indicator rather than the PASS, and standard PASS devices do not monitor heart rate or radio contact.

    Ref QB-WN4T56Source: NFPA 1982 (now in NFPA 1970) — PASS motion-sensing pre-alarm and full alarmReport a problem with this question

  21. 21. Which statement about arming a PASS (personal alert safety system) device is correct?

    • A.An integrated unit arms only after a mayday call.
    • B.A stand-alone unit must be switched on by hand.✓ Answer
    • C.A stand-alone unit arms when the cylinder opens.
    • D.An integrated unit must be switched on by hand.

    An integrated PASS is built into the SCBA and arms automatically when the cylinder valve is opened, while a stand-alone PASS must be switched on by the firefighter, a step commonly missed during donning. An integrated unit does not need a manual switch-on, and no PASS waits for a mayday before arming.

    Ref QB-E6AYQ6Source: NFPA 1982 (now in NFPA 1970) — integrated vs. stand-alone PASS activation; NFPA 1010 (2024) Ch. 6 — donning PPE and SCBAReport a problem with this question

  22. 22. An engine company is first to arrive at a vehicle crash in the travel lanes of a highway. How should the apparatus be positioned to protect the crew?

    • A.On the shoulder, facing into oncoming traffic
    • B.Right beside the crash for quick tool access
    • C.Past the crash so traffic lanes stay open
    • D.Upstream of the crash, angled to block traffic✓ Answer

    Blocking means placing the apparatus upstream, between oncoming traffic and the work area, and angling it to create a protected space so that a vehicle that fails to stop strikes the apparatus instead of responders. Parking past the crash leaves the crew exposed, a shoulder position facing traffic does not shield the lanes where the crew works, and parking beside the crash puts the crew in the traffic stream.

    Ref QB-XNF5B7Source: NFPA 1010 (2024) Ch. 6, Fire Fighter I — roadway incident scene safety (apparatus blocking); FHWA MUTCD Part 6 — traffic incident management areasReport a problem with this question

Other topics in this exam

Original practice questions written to the job performance requirements of NFPA 1010 (2024), which replaced NFPA 1001 for Fire Fighter I and II, and NFPA 470 for hazardous materials Awareness and Operations. Not affiliated with or endorsed by NFPA, IFSAC, the Pro Board, or any state fire academy. Each state writes its own certification exam — check your state's fire academy or certification office for its format and which edition it tests. NFPA 1010 standard →