22 Hazmat Awareness & Operations Practice Questions & Answers
Every Hazmat Awareness & Operations practice question from the Firefighter I & II Certification Practice Test, with the correct answer and a short explanation.
Start practice test →1. A firefighter trained only to the Awareness level finds a 55-gallon drum leaking an unknown liquid behind a warehouse. What is the correct course of action?
- A.Overpack the drum and move it to safety
- B.Dike the spill, then identify the product
- C.Plug the leak, then call for a hazmat team
- D.Isolate the area, deny entry, and notify✓ Answer
Awareness-level responders recognize the hazard, isolate the area and deny entry, protect themselves and others, and notify the proper authorities; they take no action to control the release. Diking is a defensive Operations-level task, and plugging or overpacking a leaking container is offensive Technician-level work.
Ref QB-Y2TFM2Source: NFPA 470 (2022) — Awareness level competencies: recognize, isolate/deny entry, protect, notifyReport a problem with this question
2. A tanker leaking diesel has rolled over, and an Operations-level engine company is assigned to the spill. Which task fits its level of training?
- A.Driving a wooden plug into the punctured shell
- B.Tightening the leaking valve on the tank's dome
- C.Applying a patch kit to the split in the tank
- D.Building a dike well downstream of the leak✓ Answer
Operations-level responders protect people, property and the environment with defensive actions taken from a safe distance, without trying to stop the release at its source. Plugging, patching or tightening a valve at the leak requires contact with the container and is offensive Technician-level work.
Ref QB-FJMA22Source: NFPA 470 (2022) — Operations level core competencies: defensive actions onlyReport a problem with this question
3. Under OSHA 29 CFR 1910.120(q), what minimum initial training applies to a responder at the First Responder Operations level?
- A.At least 24 hours or proven competency
- B.At least 40 hours of classroom training
- C.No hours; awareness training covers it
- D.At least 8 hours or proven competency✓ Answer
OSHA requires First Responder Operations personnel to have at least 8 hours of training or enough experience to objectively demonstrate competency, plus annual refresher training or demonstrated competency. The 24-hour minimum applies to technicians, specialists and on-scene incident commanders, and 40 hours is the rule for general workers at hazardous waste cleanup sites.
Ref QB-3UDSFUSource: OSHA 29 CFR 1910.120(q)(6)(ii) — First responder operations level trainingReport a problem with this question
4. A box truck involved in a crash shows no placards, but the driver says the load includes drums of paint thinner. Why should crews still treat it as a possible hazmat incident?
- A.Flammable liquids are exempt from placarding
- B.Only rail cars and ships must display placards
- C.Placards are only required on bulk tank trucks
- D.Many classes need no placard under 1,001 lb✓ Answer
Flammable liquids are a Table 2 material, which must be placarded only when the aggregate gross weight reaches 1,001 lb, so a smaller load can legally travel unplacarded. Placards can also be missing or wrong, which is why the absence of a placard never proves a load is safe.
Ref QB-JB8MVTSource: 49 CFR 172.504(c) — Table 2 placarding exception below 1,001 lb aggregate gross weightReport a problem with this question
5. Responding to a reported chlorine odor at a water treatment plant, how should the first engine approach the scene?
- A.From whichever direction is the quickest
- B.Downwind so crews can smell the product
- C.Uphill, upwind and upstream of the release✓ Answer
- D.Directly in, to rescue anyone in the area
Approaching from uphill, upwind and upstream keeps vapors, which for chlorine are heavier than air, and contaminated runoff moving away from responders. Smelling a product on purpose causes exposure, and rushing straight in turns rescuers into victims before the hazard is identified.
Ref QB-2U2FATSource: DOT Emergency Response Guidebook (2024) — safety precautions: approach uphill, upwind, upstreamReport a problem with this question
6. A burning box truck shows a blue placard with a flame symbol. What should the crew conclude before applying water?
- A.The load is a spontaneously combustible solid
- B.The load is a corrosive liquid in drums
- C.The load may react dangerously with water✓ Answer
- D.The load is a nonflammable compressed gas
A blue placard marks Division 4.3, Dangerous When Wet: these materials can give off flammable or toxic gas on contact with water, so water may make the incident worse. Nonflammable gas uses a green placard, spontaneously combustible solids are white over red, and corrosives are white over black.
Ref QB-HBV9QSSource: 49 CFR 172.548 — DANGEROUS WHEN WET placard (Division 4.3)Report a problem with this question
7. Which of these shipments must be placarded no matter how small the quantity on the vehicle?
- A.Division 2.2 nonflammable gas
- B.Division 2.3 poisonous gas✓ Answer
- C.Class 8 corrosive liquid
- D.Class 3 flammable liquid
Division 2.3 poison gas is a Table 1 material, and Table 1 materials require placards in any quantity because even a small release can be lethal. Flammable liquids, corrosives and nonflammable gases are Table 2 materials, which need placards only at 1,001 lb aggregate gross weight or more.
Ref QB-ZTP45SSource: 49 CFR 172.504(e) — Placarding Table 1 (any quantity) vs. Table 2Report a problem with this question
8. At a highway spill you can read the 4-digit number 1017 on an orange panel but cannot find a shipping paper or product name. Where in the ERG (Emergency Response Guidebook) do you look first?
- A.The orange pages, sorted by ID number
- B.The green pages, sorted by ID number
- C.The blue pages, sorted by ID number
- D.The yellow pages, sorted by ID number✓ Answer
The yellow pages list materials in order of their 4-digit UN/NA identification number and point to a 3-digit guide in the orange section. The blue pages are alphabetical by material name, the orange pages are the response guides themselves, and the green pages hold isolation and protective action distances only for highlighted materials.
Ref QB-GBHXHRSource: DOT Emergency Response Guidebook (2024) — yellow-bordered pages: index by ID numberReport a problem with this question
9. You find a material's entry in the ERG index and it is highlighted in green. The tank is leaking vapor, but nothing is burning. Where do you get the initial isolation and protective action distances?
- A.From the yellow-page entry beside the ID
- B.From the orange guide's public safety text
- C.From the green-page table for that ID✓ Answer
- D.From the blue-page entry beside the name
A green highlight marks a toxic-inhalation-hazard or water-reactive material, and for a spill without fire the ERG directs you to Table 1 in the green pages for specific isolation and protective action distances. The orange guide's distances are general, and the yellow and blue pages only point you to a guide.
Ref QB-YTBSXQSource: DOT Emergency Response Guidebook (2024) — Table 1, Initial Isolation and Protective Action Distances (green pages)Report a problem with this question
10. A tank holding a material that is highlighted in green in the ERG index is now fully involved in fire. Which distance should guide the evacuation decision?
- A.The fire evacuation distance in the orange guide✓ Answer
- B.The large-spill night distance in the green table
- C.The small-spill day distance in the green table
- D.The initial isolation distance in the green table
The green-table distances are calculated for spills without fire; once the material is involved in fire, the ERG tells responders to use the fire evacuation distance in the Public Safety section of the orange guide. Using green-table figures for a burning load is a well-known lookup error.
Ref QB-KHJFDQSource: DOT Emergency Response Guidebook (2024) — Table 1 instructions: if fire is involved, use orange guide evacuation distancesReport a problem with this question
11. In the ERG green table, how is the initial isolation distance applied around a spill?
- A.As a strip extending downwind from the spill
- B.As a radius in every direction from the spill✓ Answer
- C.As a corridor along the roadway from the spill
- D.As a zone extending upwind from the spill
The initial isolation distance defines a circle around the spill in all directions, where people may be exposed to dangerous concentrations both upwind and downwind. The separate protective action distance is the one measured downwind, where people are protected by evacuating or sheltering in place.
Ref QB-42RMYQSource: DOT Emergency Response Guidebook (2024) — Table 1 definitions: initial isolation zone and protective action zoneReport a problem with this question
12. In the ERG index, a guide number is followed by the letter P. What does the P warn responders about?
- A.The material is a persistent poison
- B.The material is a listed marine pollutant
- C.The material may polymerize violently✓ Answer
- D.The material needs positive-pressure gear
A P after the guide number means the material can undergo violent polymerization when heated or contaminated, a self-accelerating reaction that can rupture its container. It says nothing about persistence, respiratory equipment or marine pollutant status.
Ref QB-JH758PSource: DOT Emergency Response Guidebook (2024) — index notation 'P' (polymerization hazard)Report a problem with this question
13. At a chemical storage building, the NFPA 704 diamond shows a 3 in the yellow quadrant. What does that rating describe?
- A.A serious health or toxic exposure hazard
- B.A minor reactivity hazard on a reversed scale
- C.A serious instability or reactivity hazard✓ Answer
- D.A serious flammability or ignition hazard
In NFPA 704 the yellow quadrant rates instability (reactivity), blue rates health, red rates flammability, and white shows special hazards. Each rating runs from 0 to 4 with 4 the most severe, so a 3 is a serious hazard, not a minor one.
Ref QB-32DATPSource: NFPA 704 — Standard System for the Identification of the Hazards of Materials: instability (yellow) quadrant, 0–4 scaleReport a problem with this question
14. Dozens of people are contaminated with an unknown liquid after an incident at a transit station, and engine companies set up a mass decontamination corridor. How should the water be applied?
- A.A straight stream at high pressure
- B.High volume of water at low pressure✓ Answer
- C.Low volume, held until EMS arrives
- D.Low volume of water at high pressure
Mass decontamination uses a high volume of water at low pressure so the contaminant is flushed off quickly without driving it into the skin or injuring victims. High-pressure streams can force contamination into the body, and delaying decon lengthens the exposure; removing clothing first takes off most of the contamination.
Ref QB-NH95RSSource: NFPA 470 (2022) — mission-specific competencies: mass decontamination (high-volume, low-pressure water)Report a problem with this question
15. A highway cargo tank has rounded heads at both ends, a cylindrical uninsulated shell, and no external stiffening rings. Which product is it most likely carrying?
- A.Liquefied petroleum gas under pressure✓ Answer
- B.Liquid nitrogen at cryogenic temperature
- C.Concentrated sulfuric acid at low pressure
- D.Gasoline at near-atmospheric pressure
Rounded heads on a smooth, uninsulated cylinder identify an MC-331 high-pressure cargo tank, which carries liquefied gases such as LPG and anhydrous ammonia. Gasoline rides in elliptical MC-306/DOT-406 tanks, cryogenic liquids in heavily insulated MC-338 tanks, and corrosives in small-diameter MC-312/DOT-412 tanks with stiffening rings.
Ref QB-62FABTSource: 49 CFR 178.337 — MC-331 high-pressure cargo tank specificationReport a problem with this question
16. The SDS (Safety Data Sheet) for a leaking product lists a vapor density of 2.5. Where should crews expect the vapors to collect?
- A.Evenly mixed throughout the room's air
- B.In basements, sewers, and other low areas✓ Answer
- C.Near ceilings and upper building floors
- D.On the surface of nearby ponds and streams
Vapor density compares a gas or vapor to air, which is set at 1; a value above 1 means the vapor is heavier than air and sinks into low spots such as basements, trenches and sewers. A value below 1 would rise, and floating on water is described by specific gravity, not vapor density.
Ref QB-MHWSJRSource: NFPA 470 (2022) — Operations core: chemical and physical properties (vapor density)Report a problem with this question
17. Gasoline, with a specific gravity of about 0.7 and insoluble in water, is flowing into a small creek. Which defensive tactic best holds the product while letting the water pass?
- A.A solid dam with no pipes at all
- B.An underflow dam with pipes set low✓ Answer
- C.An overflow dam with pipes set high
- D.A dilution stream to wash it downstream
A product with a specific gravity below 1 that does not dissolve floats on water, so an underflow dam draws water out from the bottom while the floating gasoline stays trapped behind the dam. An overflow dam suits products that sink, dilution spreads a flammable liquid, and a solid dam soon overflows with the creek's water.
Ref QB-524Y5SSource: NFPA 470 (2022) — Operations core: defensive product control (damming; specific gravity)Report a problem with this question
18. A propane tank is exposed to direct flame impingement. Crews hear the relief valve's sound rising in pitch and see the tank shell discoloring. What should they do?
- A.Withdraw immediately to a safe distance✓ Answer
- B.Wait for the relief valve to empty the tank
- C.Direct a hose stream onto the relief valve
- D.Move closer to cool the area of flame contact
A rising pitch from the relief valve and discoloration of the shell show that pressure is outrunning the valve and the steel is weakening, which are warning signs of an imminent BLEVE (boiling liquid expanding vapor explosion). Crews must withdraw at once; water should never be aimed at a vent, and cooling is done earlier from maximum distance with unstaffed monitors.
Ref QB-FH55QJSource: NFPA 470 (2022) — Operations core: container behavior (General Hazardous Materials Behavior Model, BLEVE indicators)Report a problem with this question
19. Where at a hazmat scene should the decontamination corridor be set up?
- A.In the warm zone, upwind of the hot zone✓ Answer
- B.In the hot zone, next to the release point
- C.In the warm zone, downwind of the hot zone
- D.In the cold zone, beside the command post
The warm zone is the contamination reduction zone, the buffer between the hot zone and the clean cold zone, so decontamination belongs there. Placing it upwind (and uphill) keeps vapors and runoff from the release from drifting onto the corridor, while the cold zone must stay clean for command and staging.
Ref QB-YZAAAKSource: NFPA 470 (2022) — Operations core: control zones (hot, warm, cold) and decontamination corridor placementReport a problem with this question
20. A brief chlorine release from a ruptured cylinder sends a fast-moving plume toward an apartment complex that it will reach within minutes. Which public protective action is usually best?
- A.Shelter in place with windows and HVAC shut✓ Answer
- B.Evacuate residents on foot through the plume
- C.Open windows to ventilate the apartments
- D.Have residents gather in the parking lot
When a release is short and the plume will arrive before people can be moved safely, sheltering in place inside closed buildings with ventilation shut off gives better protection than evacuation. Moving people outdoors or through the plume, or opening windows, increases their exposure.
Ref QB-GFJAVKSource: DOT Emergency Response Guidebook (2024) — protective actions: shelter in place vs. evacuationReport a problem with this question
21. For an atmosphere containing an unidentified airborne contaminant at an unknown concentration, what is generally the minimum EPA level of protection for entry?
- A.Level B, with SCBA and splash protection✓ Answer
- B.Level D, plus a disposable dust mask
- C.Level C, with an air-purifying respirator
- D.Level D, with a standard work uniform
An unknown atmosphere demands the highest level of respiratory protection, a self-contained breathing apparatus (SCBA), so Level B is the usual minimum. Level C air-purifying respirators may be used only when the contaminant and its concentration are known, oxygen is at least 19.5%, and the atmosphere is not IDLH (immediately dangerous to life or health), while Level D gives no respiratory protection.
Ref QB-YXC5AKSource: OSHA 29 CFR 1910.120(c)(5)(iii) (site entry) and (q)(3)(iv) (emergency response: positive-pressure SCBA until monitoring shows less is safe); Appendix B — Level B as minimum protection when hazards are not yet identifiedReport a problem with this question
22. Crews arrive at a reported explosion where several victims show similar symptoms with no obvious cause. Before staging and committing resources, what should the officer prioritize?
- A.Moving debris to reach victims more quickly
- B.Checking the area for possible secondary devices✓ Answer
- C.Hosing down the area to wash away residue
- D.Collecting samples of the product for testing
An explosion with unusual casualty patterns is an indicator of a possible terrorist or criminal act, and secondary devices are often planted to target arriving responders, so staging areas and approach routes must be checked first. Moving debris or washing the scene destroys evidence, and product sampling is a mission-specific task done with law enforcement.
Ref QB-FF7YPJSource: NFPA 470 (2022) — Awareness/Operations: terrorism and criminal incident indicators, secondary devices, evidence preservationReport a problem with this question
Other topics in this exam
Original practice questions written to the job performance requirements of NFPA 1010 (2024), which replaced NFPA 1001 for Fire Fighter I and II, and NFPA 470 for hazardous materials Awareness and Operations. Not affiliated with or endorsed by NFPA, IFSAC, the Pro Board, or any state fire academy. Each state writes its own certification exam — check your state's fire academy or certification office for its format and which edition it tests. NFPA 1010 standard →