26 Storage, Inventory & Distribution Practice Questions & Answers
Every Storage, Inventory & Distribution practice question from the Sterile Processing (CRCST) Practice Test, with the correct answer and a short explanation.
Start practice test →1. On a scheduled round, a technician counts the supplies in a nursing unit's storage area and refills each item up to the quota set by a central manager. Which replenishment system is this?
- A.Exchange cart, swapping a depleted cart for a full one
- B.Requisition, filling each request as the unit submits it
- C.Periodic automatic replenishment, restocking to a set par level✓ Answer
- D.Just in time, delivering items shortly before they are used
In a PAR system each department keeps its own storage area with a set quota of supplies, and stores personnel replenish that stock periodically, so the unit does not have to ask for each item.
Ref QB-CQ84XRSource: U.S. GAO report PSAD-79-58A, chapter on centralized inventory management and supply distribution (PAR level and exchange cart systems); HSPA CRCST Exam Content Outline (November 2023 revision), Section 5Report a problem with this question
2. Under an exchange cart system, a unit's used cart is wheeled back to central stores while a full cart takes its place. What happens to the returned cart?
- A.It is emptied and everything left on it is thrown away as waste
- B.It is parked in storage until the unit submits a new requisition
- C.It is inventoried and restocked to serve as the next full cart✓ Answer
- D.It is sent back to the same unit once its used items are billed
Each department is assigned two carts, and the used one goes to central stores to be inventoried and restocked, which keeps one full cart on the unit at all times and gives a count of what was used.
Ref QB-V7E9HSSource: U.S. GAO report PSAD-79-58A, chapter on centralized inventory management and supply distribution (PAR level and exchange cart systems); HSPA CRCST Exam Content Outline (November 2023 revision), Section 5Report a problem with this question
3. A specialty catheter is used only a few times a year, and the supply room near the procedure rooms is already crowded. If storage is decided by how often an item is consumed, where does this catheter belong?
- A.In a physician's drawer, kept stocked by the physician
- B.On a par cart in the surgical core, restocked on a schedule
- C.On the crash cart, kept right beside the point of use
- D.In the central warehouse, ordered on demand for each need✓ Answer
Low-consumption items are kept in a central warehouse and ordered on demand, while near-point-of-use space goes to high-consumption items and to items needed emergently.
Ref QB-DQKE4TSource: Healthcare Purchasing News self-study series, 'Optimizing inventory management' (Sonstelie), section on converting unofficial inventoryReport a problem with this question
4. A technician intends to order 10 individual units of a product sold in boxes of 10, but enters a quantity of 10 with the box option selected. Ten boxes, or 100 units, arrive. Which ordering element caused the overstock?
- A.The reorder date, entered too early for the delivery cycle
- B.The catalog number, entered for the wrong product size
- C.The PAR quantity, set too high for the unit's usage
- D.The unit of measure, set to box instead of to each✓ Answer
The same number means very different amounts depending on whether the unit is each, box or case, so the unit and pack size must be confirmed along with the quantity on every order.
Ref QB-W7SKPTSource: HSPA CRCST Exam Content Outline (November 2023 revision), Section 5, ordering processes (unit of measure: each, box, case); Materials Management in Voluntary Hospitals (name, code number, specification, unit and pack size)Report a problem with this question
5. A department still counts stock by hand and records it on paper. What does moving to an electronic system that uses scanning or RFID offer?
- A.Real-time inventory visibility and automated reordering✓ Answer
- B.Transfer of vendor-owned stock to the hospital at receiving
- C.Removal of any need to check expiration dates on stored items
- D.Permission to skip inspecting packages that were scanned in
Manual counting and record keeping is labor intensive and open to error, while electronic systems show inventory in real time and can automate reordering; they do not replace inspection or date checks.
Ref QB-EQXR9USource: Healthcare Purchasing News self-study series, 'Optimizing inventory management' (Sonstelie), section on automating transactionsReport a problem with this question
6. The usual brand of a sterile drain is on back order, and a different product for the same purpose is available. What should the technician do before the item goes to the procedure area?
- A.Tell the requesting area about the outage and confirm the substitute with it✓ Answer
- B.Hold the order until the usual brand returns and let the case be rescheduled
- C.Place the substitute in the usual bin so that the workflow stays unchanged
- D.Relabel the substitute with the usual catalog number so charges stay correct
Inventory deficiencies are handled through communication: the area using the product has to know about the outage and the substitute, because a silent swap can surprise the team at the moment of use.
Ref QB-X75XUUSource: HSPA CRCST Exam Content Outline (November 2023 revision), Section 5, inventory deficiencies (outages, substitutes, communication)Report a problem with this question
7. Sterile supplies arrive in corrugated shipping cartons, and a colleague offers to wheel the cartons straight onto the sterile storage shelves to save time. Why do the cartons stay in the break-out area?
- A.They soften under positive pressure and crush nearby packs
- B.They can bring in dust, debris and insects from shipping✓ Answer
- C.They need purchasing's signature before entering clean areas
- D.They block the airflow that keeps storage humidity low
External shipping containers and corrugated boxes collect dust, debris and insects during shipment, so items are removed from them in the break-out room and the cartons never enter clean or sterile storage.
Ref QB-BXBFE2Source: HSPA CIS Self-Study Lesson CIS 298, Sterile Storage and Maintaining Sterile Package IntegrityReport a problem with this question
8. In the break-out area, the packing slip lists 12 boxes, but only 10 arrived, and one of those is the wrong size. What is the correct next step?
- A.Edit the packing slip to match what arrived and file it as received
- B.Return the whole delivery to the vendor with no record of the problem
- C.Shelve what arrived and correct the count at the next inventory
- D.Record the shortage and wrong item and resolve them against the order✓ Answer
Order reconciliation compares what was received with what was ordered; shortages and incorrect items are recorded so they can be resolved, because undocumented discrepancies leave purchase, receiving and invoice records out of agreement.
Ref QB-UEHMZ2Source: HSPA CRCST Exam Content Outline (November 2023 revision), Section 5, break-out area protocol (order reconciliation); Materials Management in Voluntary Hospitals (receipt checks); U.S. GAO report PSAD-79-58A (discrepancies among purchase orders, receiving reports and invoices)Report a problem with this question
9. While unpacking a shelf box of commercially sterile pouches, a technician finds that one pouch is punctured. The others are intact and within date. What should the technician do?
- A.Send it to sterile processing to go through the next load
- B.Pull that pouch, record it, and stock the intact pouches✓ Answer
- C.Stock it at the back, for use only if the others run out
- D.Tape over the puncture, mark the pouch and issue it first
A sterilized item must not be used if its package is wet, torn or punctured or if its expiration date has passed, and damaged material found at receipt is recorded and acted on; the intact, in-date pouches can still be stocked.
Ref QB-CXPSK3Source: CDC/HICPAC Guideline for Disinfection and Sterilization in Healthcare Facilities, Storage section; Materials Management in Voluntary Hospitals (receipt checks); HSPA CRCST Exam Content Outline (November 2023 revision), Section 5, package inspectionReport a problem with this question
10. A department scans a device's unique device identifier (UDI) to find its lot number and expiration date. Which part of the UDI carries that information when it appears on the label?
- A.The GUDID record, the entry kept in the FDA's database
- B.The production identifier, the variable part of the code✓ Answer
- C.The device identifier, the fixed part naming labeler and model
- D.The catalog number, the code printed by the distributor
The device identifier is the fixed portion naming the labeler and the version or model, while the production identifier is the variable portion that can hold the lot or batch, serial number, expiration date and manufacturing date; the FDA database holds only the device identifier.
Ref QB-XYDYVZSource: FDA, UDI Basics, Understanding the UDI FormatReport a problem with this question
11. Packs on a hard-to-reach shelf keep getting passed over and sit far longer than others of the same item. What is the concern with this pattern?
- A.Long storage makes expiry, damage or contamination more likely✓ Answer
- B.Sterilant residue builds up in packs held high in the room
- C.Chemical indicators fade over time and force reprocessing
- D.Warm air near the ceiling shortens the labeled shelf life
This is what first in, first out rotation prevents: the longer a sterile item stays in storage, the greater its exposure to handling and dust, and hard-to-reach packs are the ones most likely to expire or become damaged or contaminated.
Ref QB-EG8TAZSource: HSPA CIS Self-Study Lesson CIS 298, Sterile Storage and Maintaining Sterile Package Integrity, Objective 2Report a problem with this question
12. A new delivery of a commercially sterile item carries an expiration date earlier than the same item already on the shelf. How should the technician place it?
- A.Behind the current stock, because the newest arrival always goes last
- B.On a separate top shelf, because short-dated stock must be kept apart
- C.Mixed in with the current stock, because event-related policy ignores dates
- D.Ahead of the later-dated stock, because the earliest date must go out first✓ Answer
First in, first out exists to keep items from outdating on the shelf, so expiration dates are watched and items with a close date are placed where they can be issued before they expire, even when they arrived last.
Ref QB-WY2NQYSource: HSPA CIS Self-Study Lesson CIS 298, Sterile Storage and Maintaining Sterile Package Integrity, Objective 2Report a problem with this question
13. A storage shelf is nearly full, and a technician wants to stack wrapped packages to fit them in. Under what condition may sterile packages be stacked?
- A.Stacked only if a paper liner separates each of the wrapped surfaces
- B.Stacked only up to the height that the local fire code permits there
- C.Stacked only where the item and packaging IFU specifically state it✓ Answer
- D.Stacked only when the lower package is the heavier one of the pair
Stacking can crush or compress a package and break its barrier, so sterile packages are not stacked unless the item and packaging manufacturers' instructions for use specifically allow it.
Ref QB-DGVF5YSource: HSPA CIS Self-Study Lesson CIS 298, Sterile Storage and Maintaining Sterile Package Integrity, Objective 2Report a problem with this question
14. A hospital moves toward a just-in-time supply model that keeps very little stock on hand. What trade-off comes with this model?
- A.Lower costs, but very little buffer when supply is disrupted✓ Answer
- B.Lower expiration risk, but far more shelf space on every unit
- C.Lower labor costs, but all items need resterilizing on arrival
- D.Lower order frequency, but a larger stock of each item to count
Just-in-time was adopted to lower costs by holding little stock, which by design leaves very little buffer when disruptions occur, as shortages during major supply disruptions have shown.
Ref QB-ZY4N84Source: American Hospital Association fact sheet, Federal Investment Needed to Strengthen the National Medical Supply Chain; HSPA CRCST Exam Content Outline (November 2023 revision), Section 5, distribution systemsReport a problem with this question
15. A technician needs to move several sterile packages from the break-out room to sterile storage in one trip. Which method follows sterile handling practice?
- A.Placed loosely but securely on a cart that has a solid bottom shelf✓ Answer
- B.Carried in one armful, held against the body so that none can fall
- C.Packed tightly on a wire-bottom cart so that none of them can shift
- D.Piled high on a cart, with some overhanging, to avoid a second trip
A cart is easier and safer than hand carrying many items; packages sit loosely and securely so they are not crushed, nothing hangs over the edge, and the solid bottom shelf protects against dirt and dust.
Ref QB-GGXFN3Source: HSPA CIS Self-Study Lesson CIS 298, Sterile Storage and Maintaining Sterile Package Integrity, Objective 2Report a problem with this question
16. Sterile trays must go to an affiliated clinic across town, and a staff member offers to put them in the trunk of a personal car. Why is this not acceptable?
- A.A licensed carrier is required for any sterile item off-site
- B.A new biological indicator is required after any trunk trip
- C.A trunk's temperature and humidity cannot be controlled✓ Answer
- D.A trunk cannot display the required fluorescent orange label
Sterile items must be protected from conditions that could expose them to moisture and condensation, and a trunk gives no control over temperature or humidity, so items should not be transported there.
Ref QB-YYRA33Source: IAHCSMM/HSPA CIS Self-Study Lesson CIS 264, Off-Site Instrument Transport, Objective 2Report a problem with this question
17. A driver delivering sterile items finds the clinic's receiving door locked and no one on site during the lunch hour. Which action best protects the items?
- A.Stay with the totes in the running vehicle and call the clinic contact✓ Answer
- B.Ask a worker at the business next door to sign for the totes and take them in
- C.Leave the closed totes at the door and email the clinic about them
- D.Lock the totes in the switched-off vehicle and return after lunch
Sterile items should never be left unattended in an unsecured area, where people unaware of proper handling could contaminate them, and temperature and humidity can change quickly in a vehicle that is not running. Handing the totes to an outside worker breaks chain of custody, since that person is untrained in sterile handling.
Ref QB-FGK5G2Source: IAHCSMM/HSPA CIS Self-Study Lesson CIS 264, Off-Site Instrument Transport, Objective 2Report a problem with this question
18. During a routine check, a code cart's breakaway seal is found broken, although the drawers look full. What should happen to the cart?
- A.Send it to decontamination so all contents are reprocessed in place
- B.Check it and restock it as needed before it is returned to service✓ Answer
- C.Apply a new seal now, because a full-looking cart was not likely opened
- D.Keep it in service until the next scheduled full check of its contents
An intact seal is what tells staff the cart has not been opened, so a broken seal removes that assurance, and the cart is checked and restocked under facility policy before it goes back into service.
Ref QB-3ZTAK6Source: ACLS.net, Crash cart: recently asked questions (restocking and security seals); HSPA CRCST Exam Content Outline (November 2023 revision), Section 5, specialty cartsReport a problem with this question
19. An orthopedic implant set stays on site long term and is processed by sterile processing staff, but the vendor owns it and the hospital pays only for implants actually used. Which inventory category is this?
- A.Special order, bought one time for a single named patient
- B.Facility-owned, bought outright as permanent department inventory
- C.Consignment, stored on site and not purchased until it is used✓ Answer
- D.Loaner, borrowed for a scheduled case and then returned to the vendor
Consignment items are stored and processed on site without being owned by the facility and are paid for when used, while loaner sets are borrowed temporarily and go back to the vendor after the procedure.
Ref QB-JGN5Z5Source: Addressing Challenges Associated With Loaner Instrument Sets (PMC13408902), inventory categories; Value-based Healthcare: Reducing Implant-related Health Care Costs (PMC6370102), consignment modelReport a problem with this question
20. A manufacturer's recall letter arrives listing lot numbers, and two of those lots are on the department's shelves. According to FDA recall guidance, what should the department do?
- A.Use up the listed lots first so that less stock has to be sent back
- B.Wait for the FDA to classify the recall before moving any of the stock
- C.Discard the listed lots right away without replying to the firm at all
- D.Carry out the recalling firm's instructions now and report back to it✓ Answer
Consignees that receive a recall communication are expected to carry out the recalling firm's instructions immediately and respond to the firm, which is how the firm verifies that the notice reached everyone holding the product.
Ref QB-23E5E5Source: FDA, Recalls, Corrections and Removals (Devices), recall communications and consignee responsibilitiesReport a problem with this question
21. A recall notice for a reusable device says it must be inspected and adjusted. A colleague insists that every recall means the device has to be pulled and returned. What is accurate?
- A.A recall binds only the maker, so the department changes nothing
- B.A recall may call for checking or adjusting, so follow the notice✓ Answer
- C.A recall always means removal, so send back every unit at once
- D.A recall covers only units that failed, so check only those units
FDA uses the word recall for correction or removal actions, and a recall does not always mean stopping use or returning the product; it can mean the device needs to be checked, adjusted or fixed, so the notice's own instructions govern.
Ref QB-JJKAZ5Source: FDA, What is a Medical Device Recall?Report a problem with this question
22. Bins of a surgeon's preferred supplies keep turning up in OR cupboards, removed from managed locations after earlier stockouts. Why does this unofficial inventory count as a source of waste and loss?
- A.It transfers ownership of the stock and voids the vendor's warranty
- B.It raises PAR levels by itself, because scanners count the hidden bins
- C.It leads to outdates, damaged packaging, missing items and hidden value✓ Answer
- D.It breaks FIFO, which applies only to hospital-sterilized stock anyway
Stock moved to unmanaged spots escapes date checks and proper storage and is invisible to inventory records, which produces outdates, compromised packaging, missing items and unknown inventory value.
Ref QB-Z23T84Source: Healthcare Purchasing News self-study series, 'Optimizing inventory management' (Sonstelie), section on converting unofficial inventoryReport a problem with this question
23. A one-of-a-kind piece of equipment is needed urgently, and no one knows which unit last had it. Which tool is designed to show where it is now without a person searching floor by floor?
- A.A count sheet listing the contents of each assembled set
- B.RFID software reporting the location of tagged equipment✓ Answer
- C.A preference card listing the surgeon's usual equipment
- D.A load control number linking it to a sterilizer cycle
RFID software can locate one-of-a-kind equipment and show equipment par levels on units, whereas cards, count sheets and load numbers record contents or process history and not current location.
Ref QB-HJ8YT4Source: Healthcare Purchasing News self-study series, 'Optimizing inventory management' (Sonstelie), section on automating transactions; HSPA CRCST Exam Content Outline (November 2023 revision), Section 5, organization and tracking of inventoryReport a problem with this question
24. A new open shelving unit is being set up in sterile storage. Which setup meets sterile storage requirements?
- A.Wire bottom shelf 2 in up; top items 18 in below sprinklers; 8 in off outside walls
- B.Wire bottom shelf 8 in up; top items 2 in below sprinklers; flush to outside walls
- C.Solid bottom shelf 8 in up; top items 18 in below sprinklers; 2 in off outside walls✓ Answer
- D.Solid bottom shelf 18 in up; top items 8 in below sprinklers; 2 in off outside walls
Shelving must be at least 8 inches above the floor with a solid bottom shelf to protect items during floor cleaning, top-shelf supplies must sit at least 18 inches below the ceiling or sprinkler heads so the sprinklers work, and units stay at least 2 inches from outside walls because condensation can form on those walls. Each distractor swaps one of these clearances or drops the solid bottom shelf.
Ref QB-Y2QF33Source: Klacik S., 'Keeping it sterile: Fundamentals of sterile storage,' OR Manager, Aug 2023 (HSPA): shelving at least 8 in above floor with solid bottom shelf; top-shelf supplies 18 in below ceiling or sprinkler heads; at least 2 in from outside walls; CDC Guideline for Disinfection and Sterilization in Healthcare Facilities (2008), Storage sectionReport a problem with this question
25. A facility uses event-related shelf life. A wrapped tray sterilized 14 months ago is dry, untorn, and has an intact seal and no expiration date. What should the technician do?
- A.Reprocess it, since packs expire after 12 months
- B.Reprocess it, since wrapped packs expire after 30 days
- C.Discard it, since its sterilization date is too old
- D.Issue it, since no event has compromised the package✓ Answer
Under event-related shelf life, a package stays sterile until an event such as a tear, moisture or a broken seal compromises it, so an intact, dry package can be used regardless of age after inspection. Fixed time limits apply only when a facility uses time-related dating or a manufacturer sets an expiration date.
Ref QB-GJVMN3Source: CDC Guideline for Disinfection and Sterilization in Healthcare Facilities (2008), Recommendation 18.d-g: with event-related storage, packaged sterile items can be used indefinitely unless the packaging is compromisedReport a problem with this question
26. During a shelf check, a technician finds several wrapped packs damp because an air-conditioning drain line above the shelf has been dripping. The packs are otherwise intact. What is their status?
- A.Usable once the wrap has air-dried on the shelf
- B.Sterile, if the outer indicator has changed
- C.Contaminated, so they must be reprocessed✓ Answer
- D.Sterile, if they are used within 24 hours
Sterile items that become wet are considered contaminated because moisture carries microorganisms from the air and surfaces through the wrap, and drying does not undo that. A compromised pack must be repackaged and reprocessed, and sterile items should never be stored under air-conditioning drains, sinks or water pipes.
Ref QB-X2C5WZSource: CDC Guideline for Disinfection and Sterilization in Healthcare Facilities (2008), Storage section and Recommendation 18.f (wet items considered contaminated; repack and reprocess compromised packs); Klacik, OR Manager, Aug 2023 (no storage near or under air conditioning drains)Report a problem with this question
Other topics in this exam
Practice questions based on the HSPA CRCST Certification Exam Content Outline, ANSI/AAMI ST79 sterility-assurance practice, and CDC/HICPAC disinfection and sterilization guidance. CRCST is a mark of the Healthcare Sterile Processing Association; this site is not affiliated with or endorsed by HSPA. Always follow the device manufacturer's written instructions for use, your facility's policies, and the current edition of the applicable standards. About the CRCST exam →