27 Mobile Devices, Virtualization & Cloud Practice Questions & Answers
Every Mobile Devices, Virtualization & Cloud practice question from the CompTIA A+ Practice Test, with the correct answer and a short explanation.
Start practice test →1. A user wants more RAM in a standard laptop that has one empty memory slot. Which type of memory module should the technician order?
- A.A desktop DIMM
- B.A SO-DIMM stick✓ Answer
- C.A 72-pin SIMM
- D.An M.2 module
Laptops use SO-DIMMs (small outline DIMMs), which are roughly half the length of a desktop DIMM so they fit in limited space; a desktop DIMM will not fit a laptop slot, SIMMs are obsolete, and M.2 slots hold storage or wireless cards, not system RAM.
Ref QB-92FP76Source: Wikipedia, DIMM - SO-DIMM section (laptop SO-DIMMs about half the length of PC DIMMs, used where space is limited); CompTIA 220-1201 Objectives v4.0, 1.1 RAMReport a problem with this question
2. A user's laptop is slow to boot and open programs. It has a 2.5-inch SATA hard drive. Which replacement gives the BIGGEST performance improvement?
- A.A 2.5-inch SATA SSD✓ Answer
- B.A 7,200 rpm SATA HDD
- C.A larger 5,400 rpm HDD
- D.An external USB 2.0 HDD
A solid-state drive has no spinning platters or moving heads, so its access times are far faster than any hard drive; swapping an HDD for an SSD in the same 2.5-inch SATA bay is the standard laptop speed upgrade, while a faster-spinning or larger HDD gives only small gains and USB 2.0 is a bottleneck.
Ref QB-QHW6F4Source: Wikipedia, Laptop - Storage (SSDs have replaced hard drives; faster and more power-efficient); CompTIA 220-1201 Objectives v4.0, 1.1 HDD/SSDReport a problem with this question
3. A technician opens a recent laptop to replace a failed internal Wi-Fi/Bluetooth card. In which form factor is the replacement card MOST likely made?
- A.A SO-DIMM card
- B.An ExpressCard
- C.An M.2 card✓ Answer
- D.A PCIe x16 card
M.2 is the small internal module standard used for Wi-Fi, Bluetooth, NFC and WWAN cards (as well as SSDs) in modern laptops, replacing the older mini PCIe cards; after swapping it, the technician must reconnect the antenna leads that run to the display lid.
Ref QB-824C25Source: Wikipedia, M.2 (M.2 modules integrate Wi-Fi, Bluetooth, NFC, WWAN and SSDs; key A/E table); CompTIA 220-1201 Objectives v4.0, 1.1 Wireless cardsReport a problem with this question
4. A user reports that the laptop trackpad has started to bulge upward and no longer clicks properly. What should the technician do FIRST?
- A.Recalibrate the trackpad in settings
- B.Update the trackpad driver and reboot
- C.Press the trackpad flat and reseat it
- D.Stop using it and replace the battery✓ Answer
In most laptops the lithium-ion battery sits directly under the trackpad, so a trackpad pushed upward is a classic sign of a swollen battery; swelling comes from internal faults that can lead to thermal runaway, fire or explosion, so the device should be powered off, the battery must not be pressed or punctured, and it should be replaced with an OEM part and recycled.
Ref QB-PHJU93Source: Wikipedia, Lithium-ion battery - Safety (dendrite short circuits can initiate thermal runaway, leading to battery swelling, heat, fires or explosions); CompTIA 220-1201 Objectives v4.0, 1.1 BatteryReport a problem with this question
5. A user holds a phone a few centimeters from a store checkout terminal to pay. Which connection method is the phone using?
- A.Bluetooth
- B.Wi-Fi Direct
- C.NFC✓ Answer
- D.Infrared
Near-field communication only works over about 4 cm or less, which is why tap-to-pay requires holding the phone right next to the terminal; Bluetooth and Wi-Fi Direct reach many meters, and infrared needs line of sight and is not used for phone payments.
Ref QB-72RZU3Source: Wikipedia, Near-field communication (communication over a distance of 4 cm or less); CompTIA 220-1201 Objectives v4.0, 1.2 Connection methods - NFCReport a problem with this question
6. A technician is choosing a phone charging and data port that is reversible and has 24 pins. Which connector matches?
- A.Micro-USB
- B.USB-C✓ Answer
- C.Mini-USB
- D.USB-A
USB-C is a 24-pin double-sided connector, so it plugs in either way up, and it supersedes the earlier USB connectors; micro-USB and mini-USB are older one-way plugs with far fewer pins, and USB-A is the rectangular host-side plug that only fits one way.
Ref QB-NH7H42Source: Wikipedia, USB-C (24-pin reversible connector that supersedes all previous USB connectors); CompTIA 220-1201 Objectives v4.0, 1.2 USB/USB-C/microUSB/miniUSBReport a problem with this question
7. A user has an older iPhone that uses Apple's proprietary, reversible 8-pin connector. Which cable type does the user need to charge it?
- A.USB-C
- B.Micro-USB
- C.30-pin dock
- D.Lightning✓ Answer
Lightning is Apple's proprietary eight-pin digital connector and, unlike the 30-pin dock connector it replaced, it is reversible; newer iPhones have moved to USB-C, which is why the question says older iPhone, and micro-USB was the older Android standard.
Ref QB-62DPP2Source: Wikipedia, Lightning (connector) - Technology (eight-pin digital connector, reversible, replaced the 30-pin dock connector; superseded by USB-C); CompTIA 220-1201 Objectives v4.0, 1.2 LightningReport a problem with this question
8. An office wants a low-cost desk accessory that only duplicates the ports already on each laptop, without adding new kinds of ports. Which should the technician buy?
- A.Port replicator✓ Answer
- B.Docking station
- C.KVM switch
- D.Drawing pad
A port replicator simply reproduces the ports the laptop already has so peripherals can stay plugged in at the desk, while a docking station goes further and offers additional ports and features, often through a proprietary connector; a KVM switch shares one keyboard, monitor and mouse between computers, and a drawing pad is an input device.
Ref QB-VHPUAASource: Wikipedia, Docking station - Breakout dock (an extension of a typical port replicator that not only replicates existing ports but offers additional ports); CompTIA 220-1201 Objectives v4.0, 1.2 Docking station / Port replicatorReport a problem with this question
9. A user needs to share a phone's cellular data connection wirelessly with three coworkers' laptops at the same time. Which feature should be enabled on the phone?
- A.USB tethering
- B.NFC pairing
- C.Mobile hotspot✓ Answer
- D.Airplane mode
When a phone shares its cellular data over Wi-Fi it acts as a portable wireless access point, which is the mobile hotspot feature, so several devices can join at once; USB tethering serves only the one device on the cable, NFC cannot carry a network connection, and airplane mode turns the cellular radio off. All of this traffic counts against the data plan.
Ref QB-D2VZVASource: Wikipedia, Tethering (tethering over Wi-Fi is branded personal/mobile hotspot; the phone acts as a portable wireless access point); CompTIA 220-1201 Objectives v4.0, 1.2 Tethering/hotspot and 1.3 HotspotReport a problem with this question
10. A traveling user wants to move a phone to a new carrier. The phone has no SIM tray and the user has no physical SIM card. What should the technician do?
- A.Order a nano-SIM and insert it
- B.Install the carrier's eSIM profile✓ Answer
- C.Reset network settings and reboot
- D.Turn on Wi-Fi calling in settings
An eSIM is embedded in the device, and users change mobile operators by installing a carrier profile through the device settings (often by scanning a QR code or using the carrier app) instead of inserting a card; a phone with no tray cannot take a nano-SIM, and resetting network settings or enabling Wi-Fi calling does not change the subscriber identity.
Ref QB-2UGGZUSource: Wikipedia, eSIM (users can change mobile network operators via device settings without physically adding or swapping a SIM card; devices can hold 20+ eSIM plans); CompTIA 220-1201 Objectives v4.0, 1.3 SIM/eSIMReport a problem with this question
11. On a flight, a user has turned on airplane mode and wants to use the onboard Wi-Fi while keeping the cellular radio off. What should the user do?
- A.Re-enable only Wi-Fi✓ Answer
- B.Turn off airplane mode
- C.Enable data roaming
- D.Turn on the hotspot
Airplane mode suspends cellular, Wi-Fi and Bluetooth transmission, but Wi-Fi and Bluetooth can be switched back on individually while it stays enabled, so the cellular radio remains off; turning airplane mode off would restart the cellular radio, and roaming or a hotspot both depend on cellular service.
Ref QB-HBBBEUSource: Wikipedia, Airplane mode (suspends Bluetooth, telephony and Wi-Fi; Wi-Fi and Bluetooth may be enabled separately while in airplane mode); CompTIA 220-1201 Objectives v4.0, 1.3 Wireless/cellular data network (enable/disable)Report a problem with this question
12. A delivery app shows a precise location outdoors, but inside a large concrete building with no view of the sky the location becomes much less precise. Which location source is the phone MOST likely relying on indoors?
- A.GPS satellite signals
- B.NFC proximity tags
- C.Bluetooth device pairing
- D.Cellular tower location✓ Answer
A GPS receiver needs an unobstructed line of sight to the satellites and is the most accurate method outdoors, so it degrades inside buildings; the phone then falls back to cellular location, which estimates position by multilateration of signals between several cell towers and works indoors but is less precise. NFC and Bluetooth pairing are not location services.
Ref QB-3UUT6WSource: Wikipedia, Mobile phone tracking (multilateration of radio signals between cell towers; GNSS/GPS most accurate outdoors) and Global Positioning System (lock requires unobstructed line of sight); CompTIA 220-1201 Objectives v4.0, 1.3 Location servicesReport a problem with this question
13. Employees use personal phones for company email (BYOD). Management wants to erase company data when an employee leaves without deleting the employee's personal photos. Which MDM approach meets this goal?
- A.Require a factory reset on exit
- B.Containerize corporate apps and data✓ Answer
- C.Install corporate apps without enrolling
- D.Disable the camera on every device
MDM containerization keeps corporate email, documents and enterprise apps encrypted inside a separate container, apart from the user's personal data, so IT can wipe only the container on a BYOD phone; a factory reset would destroy personal data, apps installed without enrollment cannot be managed or wiped, and disabling the camera does nothing to remove company data.
Ref QB-JBPNKVSource: Wikipedia, Mobile device management (corporate data encrypted and processed inside the container, separated from the user's personal data; MDM used for company-owned and BYOD devices); CompTIA 220-1201 Objectives v4.0, 1.3 MDM - Corporate/BYODReport a problem with this question
14. A user turned on Bluetooth, but when the phone scans for devices, the new wireless headset does not appear in the list. Following the standard pairing sequence, which step was MOST likely missed?
- A.Enter the PIN code on the phone
- B.Test audio through the headset
- C.Put the headset in pairing mode✓ Answer
- D.Turn on GPS location on the phone
The pairing sequence is: enable Bluetooth, enable pairing (make the accessory discoverable), find the device, enter the PIN code, then test connectivity; a headset that is not in pairing mode is not discoverable, so it cannot appear in the scan, and the PIN and audio test only come after it is found. GPS is not part of Bluetooth pairing.
Ref QB-YTSTNSSource: CompTIA A+ 220-1201 V15 Exam Objectives v4.0, Objective 1.3 Bluetooth: enable Bluetooth, enable pairing, find a device for pairing, enter the appropriate PIN code, test connectivityReport a problem with this question
15. A company runs Microsoft Exchange. A technician must set up a phone so the user's email, contacts and calendar all synchronize from the company server. Which protocol is designed for this?
- A.POP3 mail retrieval
- B.Exchange ActiveSync✓ Answer
- C.SMTP mail relay
- D.FTP file transfer
Exchange ActiveSync is Microsoft's protocol for synchronizing email, contacts, calendar, tasks and notes from a messaging server to mobile devices, and it also carries device policy controls; POP3 only downloads mail, SMTP only sends or relays mail, and FTP moves files, not mailbox data.
Ref QB-FBMN3SSource: Wikipedia, Exchange ActiveSync (Microsoft protocol for synchronizing email, contacts, calendar, tasks and notes to mobile devices; also provides MDM and policy controls); CompTIA 220-1201 Objectives v4.0, 1.3 Mobile device synchronizationReport a problem with this question
16. A developer wants to try untested code inside a virtual machine. If the code damages the guest OS, she wants to get back to a working state within minutes. What should she do before running the code?
- A.Take a snapshot of the VM so she can revert to it✓ Answer
- B.Run the code on the host so the VM stays clean
- C.Give the VM more RAM so the guest OS cannot crash
- D.Move the VM to bridged networking to isolate it
A sandbox VM limits damage to that one virtual machine, and a snapshot records the VM's configuration at a point in time, so if the changes cause a problem you can revert to the snapshot in moments. Running the code on the host puts the real system at risk, extra RAM does not stop bad code from breaking the OS, and bridged networking puts the VM directly on the LAN, which is the opposite of isolation.
Ref QB-469EUBSource: Professor Messer, Virtualization Concepts – CompTIA A+ 220-1201 – 4.1 (sandboxing and snapshots)Report a problem with this question
17. A user's PC runs Windows 11, but one business app runs only on Windows 10. The user needs to use both operating systems at the same time without rebooting. What is the best solution?
- A.Set up a dual-boot with Windows 10 on the PC
- B.Run Windows 10 in a VM on the Windows 11 PC✓ Answer
- C.Reinstall the PC with Windows 10 instead
- D.Run the app in a Docker container on the PC
Virtualization lets a Windows 11 host run a Windows 10 guest simultaneously, so the user can switch between the two operating systems without rebooting. Dual-boot requires a reboot to change OS, reinstalling gives up Windows 11 entirely, and a container relies on the host's own operating system, so it cannot supply a different Windows version.
Ref QB-KN399BSource: Professor Messer, Virtualization Concepts – CompTIA A+ 220-1201 – 4.1 (legacy software/OS: Windows 10 apps on a Windows 11 system without rebooting)Report a problem with this question
18. Which of the following is an example of a Type 1 (bare-metal) hypervisor?
- A.VMware Workstation
- B.Oracle VirtualBox
- C.Microsoft Hyper-V✓ Answer
- D.Parallels Desktop
A Type 1 hypervisor sits directly on the hardware with no operating system beneath it, so the hypervisor is effectively the primary OS; VMware ESXi and Microsoft Hyper-V are the standard examples. VirtualBox, VMware Workstation and Parallels Desktop are installed as applications on top of an existing desktop OS, which makes them Type 2 (hosted) hypervisors.
Ref QB-36W3PASource: Professor Messer, Virtualization Services – CompTIA A+ 220-1201 – 4.1 (Type 1: ESXi, Hyper-V; Type 2: VMware Workstation, VirtualBox, Parallels Desktop)Report a problem with this question
19. A technician's laptop runs one virtual machine smoothly, but when three VMs run at the same time, every VM and the host become sluggish. Which resource must be large enough for all VMs running at once?
- A.Power supply wattage
- B.Video card memory size
- C.Network adapter speed
- D.Physical RAM capacity✓ Answer
The hypervisor allocates each VM a portion of the computer's physical memory, and every guest runs a complete operating system, so the host needs enough RAM for its own OS plus every VM running simultaneously. Video memory, network speed and power supply wattage do not grow with each additional running guest the way memory demand does.
Ref QB-JNQW3ASource: Professor Messer, Virtualization Services – CompTIA A+ 220-1201 – 4.1 (resource requirements: enough RAM to support all VMs running simultaneously)Report a problem with this question
20. A technician wants a virtual machine to behave like any other device on the office LAN, using an address on the same IP subnet with no network address translation. Which hypervisor network setting should be used?
- A.Bridged network address✓ Answer
- B.Shared address using NAT
- C.Private network address
- D.Loopback-only address
A bridged network address makes the VM look and act like any other device on the local network: there is no NAT, and the VM uses the same IP subnet as the physical LAN. A shared address gives the hypervisor its own subnet and translates traffic with NAT, while a private address restricts the VM to communicating only with itself and chosen devices.
Ref QB-26JRG9Source: Professor Messer, Virtualization Services – CompTIA A+ 220-1201 – 4.1 (network requirements: shared/NAT, bridged, private addresses)Report a problem with this question
21. Malware infects one guest VM and then exploits a flaw in the hypervisor to access data on other VMs running on the same host. What is this threat called?
- A.VM sprawl
- B.VM escape✓ Answer
- C.Rogue VM
- D.VLAN hop
A VM escape occurs when malware on one virtual machine uses a hypervisor flaw to break out of its isolation and reach other VMs on the same hypervisor. VM sprawl is the uncontrolled growth of unmanaged VMs, a rogue VM is an unauthorized VM on the network, and VLAN hopping is a switch-level attack between network segments, not a breakout through the hypervisor.
Ref QB-HNCKW8Source: Professor Messer, Virtualization Services – CompTIA A+ 220-1201 – 4.1 (security requirements: VM escape)Report a problem with this question
22. How does a containerized application differ from an application running in a traditional virtual machine?
- A.Containers let Windows, Linux and macOS apps share one Docker host
- B.Containers each include a full guest OS, so they start more slowly
- C.Containers share the host OS instead of each running a guest OS✓ Answer
- D.Containers need a Type 1 hypervisor beneath each application
Containers remove the per-VM guest operating system: every container runs on a single host OS through software such as Docker, which makes container images smaller, lighter and more portable than VMs. Because containers rely on that host OS, you generally cannot run Windows, Linux and macOS containers on the same Docker host; mixing guest operating systems is an advantage of VMs.
Ref QB-Z57EB8Source: Professor Messer, Virtualization Services – CompTIA A+ 220-1201 – 4.1 (containers: single host OS, Docker, cannot mix Windows/Linux/macOS containers)Report a problem with this question
23. A company moves to virtual desktop infrastructure (VDI). Each desk now has only a keyboard, mouse, display and a small client device, while the desktops run on servers in the cloud. Which requirement matters most for a good user experience?
- A.A large local storage drive
- B.A fast multicore local CPU
- C.Plenty of local system RAM
- D.Reliable network connectivity✓ Answer
With VDI, all the processing happens on the virtualized desktop running on remote servers, and the local device only sends input and receives screen updates over the network. That is why the endpoint needs little CPU, memory or storage but depends on network communication for every action.
Ref QB-GNZ8R7Source: Professor Messer, Virtualization Services – CompTIA A+ 220-1201 – 4.1 (desktop virtualization/VDI: little local CPU, memory or storage; requires network communication)Report a problem with this question
24. Several regional hospitals share the same security and compliance requirements. Instead of each building its own data center, they set up one cloud infrastructure reserved for their exclusive use. Which cloud deployment model is this?
- A.A community cloud✓ Answer
- B.A public cloud
- C.A private cloud
- D.A hybrid cloud
A community cloud is provisioned for the exclusive use of a specific group of organizations that share concerns such as mission, security requirements, policy or compliance. A public cloud is open to the general public, a private cloud serves a single organization, and a hybrid cloud combines two or more distinct cloud types.
Ref QB-Y5U367Source: NIST SP 800-145, The NIST Definition of Cloud Computing, Deployment Models: Community cloudReport a problem with this question
25. A development team wants to build and run its own application in the cloud without installing or patching operating systems and without managing a data center. Which cloud service model best fits?
- A.IaaS
- B.PaaS✓ Answer
- C.SaaS
- D.DaaS
With Platform as a Service, the provider maintains the operating systems and infrastructure, and the customer is responsible only for writing the applications that run on that platform. IaaS leaves OS installation and patching to the customer, SaaS delivers a finished application the team cannot build on as its own code, and DaaS delivers virtual desktops rather than an application platform.
Ref QB-B24U49Source: Professor Messer, Cloud Models – CompTIA A+ 220-1201 – 4.2 (PaaS: no OS maintenance or data center, customer builds the application; IaaS: customer maintains the OS)Report a problem with this question
26. An online retailer's cloud deployment automatically adds web server instances during the holiday rush and removes them when traffic drops afterward, so the company pays only for what it needs. Which cloud characteristic does this describe?
- A.Metered utilization
- B.High availability
- C.Rapid elasticity✓ Answer
- D.Multitenant hosting
Elasticity is the ability to scale infrastructure up or down at any time, often automatically, to match the current load. High availability is about redundancy and failover to keep services up, metered utilization is how usage is billed, and multitenancy is many customers sharing the same infrastructure.
Ref QB-UH9ZP9Source: Professor Messer, Cloud Characteristics – CompTIA A+ 220-1201 – 4.2 (rapid elasticity: scale up or down based on load)Report a problem with this question
27. A company's monthly cloud invoice is higher during a busy month because it is charged for the storage it used and for every byte its customers downloaded. Which cloud characteristic does this billing reflect?
- A.Multitenant hosting
- B.Rapid elasticity
- C.High availability
- D.Metered utilization✓ Answer
Metered utilization means the customer pays for how much of the resources it actually uses, such as stored data, ingress traffic and egress traffic, so a busier month produces a larger invoice. This differs from non-metered plans that charge a fixed price for a maximum block of resources regardless of use.
Ref QB-A2RGX7Source: Professor Messer, Cloud Characteristics – CompTIA A+ 220-1201 – 4.2 (metered utilization: ingress, egress and storage costs billed by use)Report a problem with this question
Other topics in this exam
Practice questions written to the published CompTIA A+ Core 1 and Core 2 exam objectives and to standard IT support practice. CompTIA and A+ are marks of CompTIA; this site is not affiliated with or endorsed by CompTIA. The exam objectives are revised periodically — confirm the current objectives and exam requirements with CompTIA before testing. About the CompTIA A+ certification →