Chapters0/43 ▾
- 1.Security Principles & Control Types0/5
- 2.Risk, Policy Hierarchy & Ethics0/4
- 3.Governance, Risk & Compliance0/4
- 4.Continuity, Disaster Recovery & Awareness0/4
- 5.Identity Lifecycle Management0/4
- 6.Logical Access Controls & Models0/4
- 7.Network Security Concepts0/5
- 8.Network Architecture & Cloud Security0/4
- 9.Data Security & Security Operations0/5
- 10.Incident Response, Assets & Testing0/4
Chapter 7 · Lesson 1 of 5
The OSI and TCP/IP models
1 min read
The OSI model has seven layers and the TCP/IP model has four. The exam mostly asks which layer does a job, so learn each layer by its address and its data unit. A question that mentions routing or IP addresses points to Layer 3, while one about MAC addresses or frames points to Layer 2.
| OSI layer | Job and data unit | TCP/IP layer |
|---|---|---|
| 1 Physical, 2 Data Link | Bits on the wire; frames by MAC address on one segment | Network Access (Link) |
| 3 Network | Packets by IP address; routing between networks | Internet |
| 4 Transport | Segments; TCP and UDP ports identify conversations | Transport |
| 5 Session, 6 Presentation, 7 Application | Services such as web and mail | Application |
Going down the stack, each layer adds its own header to what it received from above.
This is encapsulation, and the receiver strips one header per layer on the way up. A switch learns MAC addresses and forwards each frame only out the right port, so it is a Layer 2 device; a hub repeats bits out every port at Layer 1.
Check yourself
1. An administrator is asked to 'open the port for ping' so that ICMP echo requests can pass the firewall. Why is that request phrased incorrectly?
2. In the four-layer TCP/IP model, the bottom layer is the Network Access (Link) layer. Which OSI layers does it correspond to?
Facts checked 2026-11-15 · Sources: ISC2 Certified in Cybersecurity (CC) Exam Outline, RFC 1918 Address Allocation for Private Internets
ISC2 Certified in Cybersecurity (CC) cheat sheet: every key fact on one page →