21 Management: Cost Management Practice Questions & Answers
Every Management: Cost Management practice question from the AZ-900 Azure Fundamentals Practice Test, with the correct answer and a short explanation.
Start practice test →1. A company deploys two virtual machines with identical size and settings, one in each of two different Azure regions. What should it expect about their cost?
- A.The second VM is billed at a reduced rate as a duplicate
- B.Both VMs are billed at whichever regional price is lower
- C.Both VMs cost exactly the same under one global Azure price list
- D.The two VMs can be priced differently depending on the region✓ Answer
Geography is a cost factor: power, labor, taxes and fees vary by location, so the same resource provisioned in different regions can have different costs. Azure has no single global price for a resource, and it does not discount duplicates or apply the cheaper region's rate.
Ref QB-H3BPBUSource: Microsoft Learn, Describe cost management in Azure: Describe factors that can affect costs in AzureReport a problem with this question
2. An administrator deleted several test virtual machines last week, but charges related to that project continue to appear. What is the most likely cause?
- A.The empty resource group bills a monthly fee for as long as it exists
- B.Disks, NICs or public IPs created with the VMs still exist✓ Answer
- C.Deleted VMs keep billing at full rate until the billing cycle ends
- D.Azure charges a separate fee each time a VM is deleted in a month
Under the maintenance factor, provisioning a VM also provisions storage and networking resources, and deprovisioning the VM may not remove them. Those leftover resources keep billing until they are found and deleted. A resource group itself has no charge, and Azure does not bill for deleting a VM.
Ref QB-YJS6KSSource: Microsoft Learn, Describe cost management in Azure: Describe factors that can affect costs in AzureReport a problem with this question
3. A company is reviewing how Azure charges for moving data in and out of its datacenters. Which statement is correct?
- A.Outbound data transfer is priced by availability zone within one region
- B.Inbound data transfer is always billed at the same rate as outbound
- C.Outbound data transfer is priced by billing zone, a group of regions✓ Answer
- D.Data transfer between any two Azure regions is free in both directions
Some inbound data transfers into Azure datacenters are free, while outbound data transfer pricing is based on billing zones. A billing zone is a geographical grouping of Azure regions used for data-transfer pricing and is different from an availability zone.
Ref QB-G3YB6TSource: Microsoft Learn, Describe cost management in Azure: Describe factors that can affect costs in AzureReport a problem with this question
4. A company buys a preconfigured virtual machine with specialized software from a third-party vendor through Azure Marketplace. What can it expect to pay?
- A.Vendor charges only, with the underlying Azure services included free
- B.Azure service charges only, with the vendor's software included free
- C.Azure service charges plus vendor charges under a structure the vendor sets✓ Answer
- D.Azure service charges plus vendor charges at rates that Microsoft sets
When you buy through Azure Marketplace, you may pay for the Azure services you use and also for the third-party vendor's services or expertise. The billing structure is set by the vendor, not by Microsoft.
Ref QB-XJEUDRSource: Microsoft Learn, Describe cost management in Azure: Describe factors that can affect costs in AzureReport a problem with this question
5. A team is creating a new Azure storage account and wants to understand what will drive its price. Which set of choices affects the cost?
- A.The type of data, access speed, number of copies and region✓ Answer
- B.Whether the portal, Azure CLI or PowerShell creates the account
- C.The account name, resource group name and tags applied to it
- D.The number of admins with access and their role assignments
Resource type and settings drive cost: for a storage account, the type of data stored, how fast you need to access it, how many backup copies are kept and the region all affect the price. Names, tags, who has access and which tool creates the account do not change the price.
Ref QB-F3MZYRSource: Microsoft Learn, Describe cost management in Azure: Describe factors that can affect costs in AzureReport a problem with this question
6. A company runs a production database around the clock on the same specific resources and expects that to stay unchanged for three years. Which pricing option fits this workload best?
- A.Pay-as-you-go billing that avoids any long-term commitment to Azure
- B.Azure savings plan for compute applied across VM services
- C.Reservations for that specific resource over a three-year term✓ Answer
- D.Spot pricing that runs the database on unused Azure capacity
Reservations are best for stable, predictable, long-running workloads: you commit to specific resource capacity for a one- or three-year term and get discounted pricing, and they can apply to databases. Spot capacity can be evicted, pay-as-you-go gives up the commitment discount, and the savings plan is aimed at compute usage that shifts among services.
Ref QB-WJ3H8QSource: Microsoft Learn, Describe cost management in Azure: Describe cost optimization options in AzureReport a problem with this question
7. A company's total compute spend is steady, but its workloads shift often between VM families and other compute services. It wants a commitment discount that stays flexible. Which option fits best?
- A.Spot Virtual Machines that run on unused capacity at low prices
- B.Azure savings plan for compute with a fixed hourly spend commitment✓ Answer
- C.Pay-as-you-go billing with each VM resized manually every month
- D.Reservations for one specific VM instance type over three years
With Azure savings plan for compute you commit to an hourly spend amount for one or three years instead of a specific VM family or instance type, and savings apply to eligible compute usage. That makes it the fit when usage is steady but needs flexibility across compute services; Reservations tie you to specific resources and Spot capacity can be evicted.
Ref QB-E39PTQSource: Microsoft Learn, Describe cost management in Azure: Describe cost optimization options in AzureReport a problem with this question
8. A studio runs overnight batch rendering jobs that can simply restart if interrupted, and lowest cost is its top priority. Which pricing option fits best?
- A.Reservations for the render VMs over a one-year term
- B.Pay-as-you-go VMs that run only during business hours
- C.Azure savings plan for compute over a three-year term
- D.Spot Virtual Machines that use unused Azure capacity✓ Answer
Spot Virtual Machines use unused Azure capacity at reduced prices but can be evicted when Azure needs the capacity back, so they suit fault-tolerant or interruptible work such as batch rendering when lowest cost is the priority. Commitment options suit steady workloads instead.
Ref QB-5KJUEYSource: Microsoft Learn, Describe cost management in Azure: Describe cost optimization options in AzureReport a problem with this question
9. A team is planning a new web app and needs an estimate of monthly compute, storage and network costs before anything is deployed. Which tool should it use?
- A.Budgets in Cost Management
- B.Azure Advisor cost recommendations
- C.Cost analysis in Cost Management
- D.The Azure pricing calculator✓ Answer
The pricing calculator estimates the cost of provisioning Azure resources, including compute, storage and associated network costs, and is used before deployment. Cost analysis and budgets in Cost Management work with actual spending after resources exist, and Azure Advisor makes recommendations about resources already deployed.
Ref QB-N3RZZYSource: Microsoft Learn, Describe cost management in Azure: Explore the pricing calculatorReport a problem with this question
10. A developer adds three VMs and a database to an estimate in the Azure pricing calculator. What happens as a result?
- A.The items stay an estimate, with nothing deployed or billed✓ Answer
- B.The items deploy to a sandbox and are billed only if they are kept
- C.Capacity for the items is reserved now and billed once they deploy
- D.The items deploy right away and are billed at the estimated rates
The pricing calculator is for information purposes only: nothing is provisioned when you add resources to it, and you are not charged for any services you select. Its prices are only estimates.
Ref QB-D9JA4JSource: Microsoft Learn, Describe cost management in Azure: Explore the pricing calculatorReport a problem with this question
11. Before deploying, an architect wants to compare options in the Azure pricing calculator. Which comparison can the calculator provide?
- A.Current alerts showing which budgets have exceeded thresholds
- B.Estimates across regions, service tiers and storage redundancy✓ Answer
- C.Live CPU and memory usage of the VMs already running in Azure
- D.Last month's actual charges grouped by department and service
The pricing calculator lets you compare estimated costs across regions, service tiers and storage options such as storage type, access tier and redundancy before deployment. Actual charges and budget alerts come from Cost Management, and live CPU and memory usage comes from monitoring tools.
Ref QB-VRC5HHSource: Microsoft Learn, Describe cost management in Azure: Explore the pricing calculatorReport a problem with this question
12. A project manager uses a pricing calculator estimate as the baseline for budget approval. How should that monthly figure be treated?
- A.As a binding quote that Microsoft guarantees for the first year
- B.As the amount already charged to the company's subscription
- C.As a spending cap that Azure enforces on the subscription
- D.As an estimate that can differ from the actual monthly bill✓ Answer
Prices in the pricing calculator are only estimates provided for information purposes, so actual charges can differ. The calculator does not create a guaranteed quote, charge the subscription or enforce a spending limit; teams revisit the estimate as architecture decisions change.
Ref QB-E9WM9KSource: Microsoft Learn, Describe cost management in Azure: Explore the pricing calculatorReport a problem with this question
13. After three months in production, a company wants to see where its actual Azure spending accrued, broken down by resource group and service. Which tool should it use?
- A.Azure Service Health incident history
- B.Cost analysis in Microsoft Cost Management✓ Answer
- C.Azure Policy compliance reports by group
- D.The saved estimate in the pricing calculator
Cost analysis in Cost Management gives a visual of actual costs and lets you view aggregated costs by subscription, resource group or service to see where costs accrue and spot trends. The pricing calculator only estimates planned costs, and Azure Policy and Service Health do not report spending.
Ref QB-WRQFPJSource: Microsoft Learn, Describe cost management in Azure: Describe the Microsoft Cost Management toolReport a problem with this question
14. A dev/test team on a pay-as-you-go subscription wants an email when spending reaches 80 percent of a monthly limit it defines. What should it set up?
- A.A budget in Cost Management with a budget alert at 80 percent✓ Answer
- B.A department spending quota alert at a fixed quota threshold
- C.A credit alert on the subscription's Azure Prepayment balance
- D.An Azure Policy compliance report that audits spending at 80 percent
A budget sets a spending limit, and its budget alert fires when spending reaches or exceeds a threshold you define, appearing in cost alerts and emailing the budget's alert recipients. Credit alerts and department spending quota alerts apply only to Enterprise Agreement customers, and Azure Policy does not track spending.
Ref QB-B9UMRFSource: Microsoft Learn, Describe cost management in Azure: Describe the Microsoft Cost Management toolReport a problem with this question
15. A budget alert fired when a subscription hit 100% of its monthly budget, yet all of its VMs kept running and billing. What explains this?
- A.Azure stops resources only at the end of the current billing cycle
- B.Azure stops resources only when automation is attached to the budget✓ Answer
- C.Azure stops resources only for budgets set on a management group
- D.Azure stops resources only once spending passes 110% of the budget
A budget alert notifies you that a threshold was reached; it does not by itself stop spending. Budgets can be configured to trigger automation that suspends or modifies resources, such as shutting down nonproduction VMs, and only then are resources acted on. No overage, cycle-end or scope rule stops resources automatically.
Ref QB-TRNF6FSource: Microsoft Learn, Describe cost management in Azure: Describe the Microsoft Cost Management toolReport a problem with this question
16. A company wants its nonproduction VMs shut down automatically when a spending threshold is reached. Which approach supports this?
- A.A budget configured to trigger automation at the threshold✓ Answer
- B.A credit alert emailed to Enterprise Agreement account owners
- C.A cost analysis view filtered to the nonproduction tag
- D.A pricing calculator estimate saved with a monthly spending cap
Budgets in Cost Management can be configured to trigger automation that suspends or modifies resources when a spending threshold is reached, for example shutting down nonproduction resources. Credit alerts only send notifications, the pricing calculator provisions and controls nothing, and cost analysis only displays costs.
Ref QB-C97YWGSource: Microsoft Learn, Describe cost management in Azure: Describe the Microsoft Cost Management toolReport a problem with this question
17. An administrator adds the tag Environment=Prod to a resource group that already contains ten resources. What happens to the tags on those ten resources?
- A.Each resource receives the new tag the next time it is modified
- B.Each resource receives the new tag only if it has no tags yet
- C.Each resource keeps its existing tags without gaining the new one✓ Answer
- D.Each resource receives the new tag right away from the resource group
Resources don't inherit tags from subscriptions or resource groups, so a tag applied at one level does not automatically show up at another. To apply or reapply tags across resources, you can use Azure Policy or add the tags directly.
Ref QB-URZSBGSource: Microsoft Learn, Describe cost management in Azure: Describe the purpose of tagsReport a problem with this question
18. A company requires every new resource to carry a CostCenter tag and wants tags that someone removes to be reapplied. Which service should it use?
- A.Budgets in Microsoft Cost Management
- B.Resource locks on each resource group
- C.Azure Policy with tagging rules✓ Answer
- D.Azure role-based access control
Azure Policy can enforce tagging rules and conventions, such as requiring certain tags on new resources as they're provisioned and reapplying tags that have been removed. Resource locks prevent deletion or changes, role-based access control governs who can act, and budgets track spending.
Ref QB-H9YMSPSource: Microsoft Learn, Describe cost management in Azure: Describe the purpose of tagsReport a problem with this question
19. Finance wants to allocate monthly Azure costs to internal departments that share the same subscriptions. What is the best approach?
- A.Tag resources with a cost center and group costs by that tag✓ Answer
- B.Run the pricing calculator for each department at month end
- C.Deploy each department's resources in its own availability zone
- D.Put a resource lock on each department's resources to track cost
Tags let you group resources so you can report on costs and allocate internal cost centers; a CostCenter tag is part of a common starter tag set. Resource locks only prevent changes, the pricing calculator estimates planned costs rather than actual ones, and availability zones are for resiliency, not cost allocation.
Ref QB-ZRSF7PSource: Microsoft Learn, Describe cost management in Azure: Describe the purpose of tagsReport a problem with this question
20. A team tags resources as Mission-critical, High-impact or Low-impact so it can group them by how critical their availability is and define SLAs. Which tagging purpose does this serve?
- A.Workload automation, letting Azure DevOps act on them
- B.Security, classifying data as public or confidential
- C.Governance, marking resources aligned with ISO 27001
- D.Operations management, grouping by availability needs✓ Answer
Operations management is the tagging purpose that groups resources by how critical their availability is to operations, which helps formulate service-level agreements. Security tags classify data sensitivity, governance tags mark compliance alignment, and workload automation tags let tools act on resources.
Ref QB-PSFEA8Source: Microsoft Learn, Describe cost management in Azure: Describe the purpose of tagsReport a problem with this question
21. A new administrator is learning how Azure helps organize resources. Which description matches a resource tag?
- A.A name and value pair of metadata attached to a resource✓ Answer
- B.A rule that denies new resources breaking company standards
- C.A container that holds resources sharing one lifecycle
- D.A setting that blocks deletion of or changes to a resource
A resource tag consists of a name and a value and provides extra information, or metadata, about a resource; each resource can have one or more tags. Blocking deletion or changes describes a resource lock, denying noncompliant resources describes Azure Policy, and a container for related resources describes a resource group.
Ref QB-7ANKV8Source: Microsoft Learn, Describe cost management in Azure: Describe the purpose of tagsReport a problem with this question
Other topics in this exam
Practice questions built from the skills measured in Microsoft's published AZ-900 study guide. Microsoft, Azure and Microsoft Certified: Azure Fundamentals are trademarks of the Microsoft group of companies; this site is not affiliated with or endorsed by Microsoft, and these are not real exam questions. Prices, scoring rules, exam languages, service names and features change over time — confirm the current details on Microsoft Learn before you book. The real exam also uses question formats such as yes/no statement sets and drag-and-drop, which this single-answer practice does not reproduce. Microsoft AZ-900 study guide →