Chapters0/28 ▾
Chapter 1 · Lesson 1 of 5
Continuous measurement: frequency, duration, latency and IRT
1 min read
Continuous measurement means the RBT records every instance of the behavior during the observation. The exam rarely asks for a definition alone. Instead it describes the supervisor's question and asks which measure answers it, so match the question to the stretch of time each measure covers.
| Measure | What it times or counts | Supervisor's question |
|---|---|---|
| Frequency or count | How many times it happened | How often? |
| Duration | Start to end of one instance | How long does each episode last? |
| Latency | Antecedent to start of the response | How long before the client starts? |
| Inter-response time (IRT) | End of one response to start of the next | How much pause between responses? |
Example: a teacher says "line up" and the student starts walking 15 seconds later. Those 15 seconds are latency. If the walk to the door then takes 40 seconds, that is duration. Duration is the right choice when the number of episodes stays the same but their length varies, because a count would show no change at all.
Check yourself
1. A supervisor asks an RBT to record two things: the time from the moment a timer sounds until the client begins washing his hands, and the time from the end of one instance of hand flapping until the beginning of the next instance. Which two continuous measures has the supervisor requested, in that order?
2. An RBT gives the instruction "Put on your shoes." The client eventually complies, but the supervisor is concerned about how long the client takes to begin responding after an instruction is delivered. Which measure BEST captures that concern?
Facts checked 2026-11-15 · Sources: BACB: RBT Test Content Outline (3rd ed.), BACB: RBT Ethics Code (2.0)
RBT cheat sheet: every key fact on one page →