Quibank app: now on the App Store — free, works offline. Get the app ↗

23 Resistance Exercise Technique Practice Questions & Answers

Every Resistance Exercise Technique practice question from the NSCA-CPT Practice Test (NSCA Certified Personal Trainer), with the correct answer and a short explanation.

Start practice test →
  1. 1. A client on the barbell bench press wraps the fingers around the bar but keeps both thumbs on the same side as the fingers. Which correction should the trainer make first?

    • A.Wrap the thumbs around the bar to form a closed grip✓ Answer
    • B.Switch to an alternated grip with one palm facing up
    • C.Turn both hands into a supinated, palms-up grip instead
    • D.Move both hands in to exactly shoulder width on the bar

    The thumbless (open or false) grip lets the bar roll out of the hands onto the chest or face. The NSCA teaches a closed grip, thumb wrapped around the bar, and lists gripping the bar with an open grip as a common mistake; the bench press uses a closed, pronated grip slightly wider than shoulder width. The alternated grip is the spotter's grip, and a supinated grip is not the standard bench grip.

    Ref QB-JVEPJ4Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 3 Technique Fundamentals: Handgrips (closed grip); Chapter 4 Barbell Bench Press and Back Squat common mistakes (gripping with an open grip)Report a problem with this question

  2. 2. During a dumbbell bench press, a client lifts both feet onto the end of the bench and crosses the ankles. How should the trainer evaluate this?

    • A.Accept it: foot position does not matter on a supine press
    • B.Accept it: lifting the feet onto the bench is the safer variation
    • C.Correct it: both feet go flat on the floor for five-point contact✓ Answer
    • D.Correct it: only the head and buttocks must stay on the bench

    Seated and supine bench exercises use the five-point body contact position: head, shoulders and upper back, and buttocks on the bench, with the right and left feet flat on the floor. Lifting the feet onto the bench removes two of the five contact points and makes the body less stable under the dumbbells.

    Ref QB-4DY6B6Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 3 Technique Fundamentals: Stable Body and Limb Positioning (five-point body contact position)Report a problem with this question

  3. 3. A client lowers the barbell quickly during the bench press and rebounds it off the chest to start each press. Which cue best corrects this?

    • A.Stop the bar a few inches above the chest on every rep
    • B.Lower the bar under control until it touches the chest✓ Answer
    • C.Arch the hips off the bench to shorten the bar path
    • D.Continue the current technique to keep the reps fast

    The NSCA's bench press technique lowers the bar slowly and under control so it touches the chest, then drives it up, and the coaching points say to avoid bouncing the bar off the chest. Arching the hips breaks contact between the lower back and the bench, and stopping short of the chest does not use the full range of motion.

    Ref QB-KVSZQ5Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Barbell Bench Press (procedure and coaching points)Report a problem with this question

  4. 4. A trainer is about to spot a client's heavy barbell bench press and help with the lift-off. How should the trainer grip the bar?

    • A.A closed, pronated grip placed outside the client's grip
    • B.A closed, alternated grip placed inside the client's grip✓ Answer
    • C.An open, supinated grip placed near the ends of the bar
    • D.A hook grip placed directly on top of the client's hands

    For over-the-face exercises, the NSCA has the spotter stand at the head of the bench and grasp the bar with a closed, alternated grip inside the lifter's grip for the lift-off and return. One palm up and one palm down keeps the bar from rolling out of the spotter's hands onto the client's face or neck.

    Ref QB-ZCW6T2Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 3 Spotting: Spotting Over-the-Face Exercises; Barbell Bench Press – Spotting TechniqueReport a problem with this question

  5. 5. A trainer is spotting a client's dumbbell incline bench press. Where should the trainer's hands be during the set?

    • A.On the client's shoulders, holding them against the pad
    • B.Under the client's elbows, ready to push them up and in
    • C.On the client's upper arms, guiding them toward center
    • D.Near the client's wrists, following the dumbbells' path✓ Answer

    The NSCA has the spotter keep the hands near the client's wrists and follow the dumbbells as they descend and rise, grasping the wrists if the client struggles. Spotting at the elbows or upper arms leaves the dumbbells free to tip inward and fall onto the face or chest.

    Ref QB-GVQZ72Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 3 Spotting: Spotting Over-the-Face Exercises (dumbbells) and Dumbbell Incline Bench Press – Spotting TechniqueReport a problem with this question

  6. 6. A client is learning the barbell hang clean with a moderate load. What should the trainer do about spotting?

    • A.Stand in front and grab the bar if the catch looks unstable
    • B.Use two spotters at the ends of the bar on every repetition
    • C.Teach the client to get away from a missed bar, with no spotter✓ Answer
    • D.Stand behind the client with both hands near the hips each rep

    The NSCA does not spot power exercises such as the hang clean because spotting a fast-moving bar is too dangerous for both the spotter and the lifter. Instead, the coach teaches the lifter how to get away from a bar that is out of control or unstable.

    Ref QB-2D9HY3Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 3 Spotting: Spotting Considerations for Power ExercisesReport a problem with this question

  7. 7. A trainer is reviewing a client's free-weight program. Which of these exercises calls for a spotter?

    • A.Barbell hang clean started from just above the knees
    • B.Dumbbell forward lunge with the weights held at the sides
    • C.Barbell Romanian deadlift started from a standing position
    • D.Barbell front squat with the bar racked on the shoulders✓ Answer

    The NSCA lists free-weight exercises done overhead, with the bar on the back, with the bar racked on the front of the shoulders, and over the face as the ones that need a spotter, so the front squat qualifies. The hang clean is a power exercise and is not spotted, and the Romanian deadlift and the lunge with dumbbells at the sides do not place the load over the head, face or shoulders.

    Ref QB-HV3CD3Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 3 Spotting: Types of Exercises that Require SpottingReport a problem with this question

  8. 8. A trainer is the only spotter for a client's barbell back squat. Where should the trainer stand and place the arms?

    • A.In front of the client, hands on the bar, guiding it down
    • B.Beside the client, one hand on the bar end, one on the back
    • C.Behind the client, hands on the bar just outside the grip
    • D.Behind the client, arms under the armpits, moving in unison✓ Answer

    With one spotter, the NSCA places the spotter behind the client with the feet slightly wider than the client's and the arms under the client's armpits, descending and ascending in unison without touching. If the client fails, the spotter wraps the arms around the torso to help return to standing. Hands on the bar outside the grip is the spotting position for an overhead press, not a squat.

    Ref QB-7D27U9Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 3 Spotting: Barbell Back Squat – Spotting Technique with One SpotterReport a problem with this question

  9. 9. A client wants the barbell back squat to place relatively more of its demand on the hips and less on the knees. Which bar placement fits this goal?

    • A.A front-rack position, resting across the front of the shoulders
    • B.A high-bar position, resting on top of the trapezius near the neck
    • C.A low-bar position, lower on the back below the top of the trapezius✓ Answer
    • D.An overhead position, with the bar held locked out at arm's length

    The NSCA describes the high-bar squat with the bar on top of the trapezius near the base of the neck, which increases force at the knees, and the low-bar squat with the bar lower on the back, which increases force at the hips. The front-rack position keeps the torso more upright and shifts work toward the knees, not the hips.

    Ref QB-PVUZ89Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Barbell Back Squat (Bar Placement: high-bar and low-bar squatting)Report a problem with this question

  10. 10. During a barbell back squat, a client stares at the floor a few feet ahead. As the client descends, the weight drifts onto the balls of the feet and the upper back starts to round. Which cue addresses the main fault?

    • A.Keep the head neutral with the eyes looking forward✓ Answer
    • B.Tuck the chin to the chest to lengthen the spine
    • C.Continue the current technique with the eyes down
    • D.Tilt the head far back and look up at the ceiling

    The NSCA cues the head and eyes forward so the cervical spine stays in line with the body. Tilting the head forward shifts weight to the balls of the feet and can round the back, while tilting it far back shifts weight to the heels and stresses the neck and back, so neither extreme fixes the fault.

    Ref QB-EQ7VYYSource: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Barbell Back Squat (Head and Eye Position, common mistakes)Report a problem with this question

  11. 11. On a barbell Romanian deadlift, a client bends the knees deeply and squats down as the bar lowers, and the low back rounds as the bar passes mid-shin. Which correction fits the exercise?

    • A.Keep the same depth but tuck the chin to protect the neck
    • B.Squat deeper so the bar can reach the floor with a flat back
    • C.Push the hips back, knees slightly bent, bar only to the knees✓ Answer
    • D.Lock the knees fully straight and lower the bar to the floor

    In the NSCA's Romanian deadlift, the knees stay slightly flexed while the hips push backward, the bar slides down the thighs, and the descent continues with a flat back until the bar reaches the top of the knees. Squatting down turns the lift into a different exercise, and pulling past the point where the back can stay flat causes the rounding.

    Ref QB-X7D2KZSource: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Barbell Romanian Deadlift (RDL)Report a problem with this question

  12. 12. A client starts each barbell hang clean by bending the knees and lowering the bar to mid-shin with a rounded back before exploding upward. Which correction should the trainer give?

    • A.Begin with the bar racked at the chest and dip at the knees
    • B.Keep lowering the bar to mid-shin but bend the knees even more
    • C.Start every single rep from the floor with the bar touching the shins
    • D.Hinge at the hips to lower the bar only to the knees, back flat✓ Answer

    In the NSCA hang clean, the client stands with the bar at the thighs, then flexes at the hips with the back flat to lower the bar to about the top of the knees, shoulders in front of the bar, before the explosive pull. Starting from the floor makes it a power clean, and lowering to mid-shin with a rounded back is the fault itself.

    Ref QB-FQJ762Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Barbell Hang Clean (start position and procedure)Report a problem with this question

  13. 13. During a dumbbell forward lunge, a client takes a short step, the front knee travels well past the toes, and the front heel lifts off the floor. Which cue best corrects this?

    • A.Drop the back knee hard to the floor to reach full depth
    • B.Hold the torso fully upright and let the knee keep traveling
    • C.Take a longer step and keep the weight on the front heel✓ Answer
    • D.Take a shorter step and push off the ball of the front foot

    The NSCA lunge uses an exaggerated step forward, keeps the weight on the front heel, and does not let the front knee go past the toes. A short step forces the knee forward and onto the ball of the foot, so lengthening the step and driving through the heel fixes both faults.

    Ref QB-Y7RCR2Source: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Forward Step Lunge (procedure and coaching points)Report a problem with this question

  14. 14. A client performs a dumbbell forward lunge with a long step, feet hip-width apart, toes straight ahead, front thigh parallel to the floor, torso steady with a flat back, front knee over the front foot, hips and shoulders square, and a push back through the front heel. How should the trainer respond?

    • A.Continue with the current technique as it is performed✓ Answer
    • B.Ask for a narrower stance with both feet on a single line
    • C.Cue a push back through the toes of the front foot
    • D.Cue the front knee to travel well past the front toes

    Every element described matches the NSCA forward step lunge: an exaggerated step, feet hip-width with toes forward, front thigh parallel, a flat back with the front knee kept over the foot, square hips and shoulders, and a push through the front heel. Because the form is already correct, the right call is to let the client continue.

    Ref QB-CQG7NWSource: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Forward Step Lunge (step length, knee over foot, heel, square hips)Report a problem with this question

  15. 15. On the lat pulldown, a client starts each repetition by leaning far back and swinging the torso, then pulls the bar down to the stomach. Which cue best corrects this?

    • A.Lean back further so the bar can reach the lower abdomen
    • B.Keep the torso steady and pull the bar to the top of the chest✓ Answer
    • C.Switch to a close supinated grip so the arms do more work
    • D.Pull the bar down behind the neck to keep the torso upright

    The NSCA lat pulldown keeps the back flat and the chest up, pulls the shoulder blades down and back, and brings the bar down until it touches the top of the chest. The coaching points say to avoid starting the pull by leaning backward with the torso, which is the momentum fault described.

    Ref QB-V7PC8XSource: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Lat Pulldown (procedure and coaching points)Report a problem with this question

  16. 16. A client doing pull-ups begins each rep with the elbows still bent and kicks the legs to get the chin over the bar. Which correction should the trainer give?

    • A.Stop each rep when the eyes reach the level of the bar
    • B.Kick the legs harder so the chin clears the bar every rep
    • C.Start from a full hang and pull without swinging the legs✓ Answer
    • D.Keep the elbows bent at the bottom to protect the joints

    The NSCA pull-up starts from a complete hang with the elbows and hips fully extended, pulls until the chin is over the bar, lowers under control, and avoids swinging the body or legs. Starting with bent elbows shortens the range of motion, and the leg kick uses momentum instead of the upper back and arms.

    Ref QB-DQUHTXSource: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Pull-Ups (start position, procedure, coaching points)Report a problem with this question

  17. 17. Twenty seconds into a hand plank, a client's hips sag toward the floor and the lower back arches. Which cue best corrects this?

    • A.Lift the hips into a high pike to take the load off the back
    • B.Squeeze the glutes and brace the abdomen to level the hips✓ Answer
    • C.Continue the hold while letting the low back stay arched
    • D.Hold the breath to keep the trunk tight for the full hold

    The NSCA plank sets a neutral pelvis and spine by contracting the gluteals and the abdominal muscles, keeps a straight line from the ankles to the ears, and lists sagging hips and an arched lower back as faults. Piking the hips is the opposite breakdown, and the client should breathe normally rather than hold the breath.

    Ref QB-W72QDYSource: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 4 Exercise Technique: Hand Planks (procedure and coaching points)Report a problem with this question

  18. 18. On a seated leg extension machine, a client's knee sits several inches in front of the machine's pivot point, and the client feels pulling at the knee during the lift. Which adjustment should the trainer make first?

    • A.Raise the seat so the thighs angle down off the front of the cushion
    • B.Adjust the back pad so the knee lines up with the pivot axis✓ Answer
    • C.Slide the shin pad up near the knee to shorten the lever arm
    • D.Limit the range of motion to the final few degrees of the lift

    For cam-, pulley- or lever-based machines with an axis of rotation, the NSCA aligns the target joint with the machine's axis, which may require adjusting the seat, roller pad or back pad. When the knee is out of line with the pivot, the machine's arc and the joint's arc differ, which creates the pulling the client feels.

    Ref QB-AQSHAUSource: NSCA Basics of Strength and Conditioning Manual (Sands, Wurth, Hewit), Chapter 3 Technique Fundamentals: Stable Body and Limb Positioning (aligning the target joint with the machine's axis of rotation)Report a problem with this question

  19. 19. A client performs a standing dumbbell biceps curl. Which role does the brachialis play in this elbow flexion?

    • A.Synergist that assists the biceps brachii in flexing the elbow✓ Answer
    • B.Stabilizer that holds the wrist still without aiding the lift
    • C.Antagonist that opposes the biceps brachii as the elbow flexes
    • D.Prime mover for elbow extension during the lowering phase

    In elbow flexion the biceps brachii is the prime mover (agonist), and the brachialis, deep to it, assists the motion, which makes it a synergist, as does the brachioradialis. The antagonist to elbow flexion is the triceps brachii, which has the opposite action.

    Ref QB-T7YPVUSource: OpenStax Anatomy and Physiology 2e, Section 11.1 Interactions of Skeletal Muscles, Their Fascicle Arrangement, and Their Lever Systems (prime movers, synergists and antagonists)Report a problem with this question

  20. 20. A client finds the suspension-trainer inverted row too easy. Which change will increase the load on the client's pulling muscles?

    • A.Let the straps go slack at the bottom of each repetition
    • B.Walk the feet closer to the anchor so the body is more horizontal✓ Answer
    • C.Walk the feet away from the anchor so the body is more upright
    • D.Shorten the straps so the body stands closer to vertical

    In suspension rows, the load on the straps rises as the body becomes more horizontal and as the feet move closer to the point directly under the anchor, while a more upright body leaves more of the body weight on the feet. A slack strap removes tension and control rather than adding load.

    Ref QB-57ARSASource: Giancotti GF, Fusco A, Varalda C, Capelli G, Cortis C. Evaluation of Training Load During Suspension Exercise. Journal of Strength and Conditioning Research (2021), discussion of strap load versus body inclination and foot distance from the hanging pointReport a problem with this question

  21. 21. During a two-hand kettlebell swing, a client squats deeply with the knees moving far forward and then raises the bell mainly by lifting it with the shoulders. Which correction should the trainer give?

    • A.Hinge at the hips and drive the bell up with a hard hip extension✓ Answer
    • B.Squat lower each rep so the quadriceps can drive the bell upward
    • C.Bend the elbows and curl the bell up toward chest height each rep
    • D.Lift the bell with the shoulders and keep the hips out of the swing

    The kettlebell swing is a posterior chain dominant exercise that, done correctly, depends on hip extension; the bell should float up from a forceful hip drive, not be squatted up or front-raised. A hip hinge with a neutral spine and relaxed arms lets the glutes and hamstrings produce the power.

    Ref QB-MP4K7ASource: Murphy KM, Riemann BL. Effects of Kettlebell Swing Style and Mass on Female Hip Joint Kinetics. International Journal of Sports Physical Therapy (2025), background describing swings as posterior chain dominant and requiring hip extensionReport a problem with this question

  22. 22. A client doing a standing band row says the first part of each pull feels easy and the last part feels much harder. Which explanation should the trainer give?

    • A.Band tension rises as it stretches, so the end range is the hardest✓ Answer
    • B.Band tension depends only on speed, like water drag on a limb
    • C.Band tension falls as it stretches, so the start should be the hardest
    • D.Band tension stays constant, so the hard finish is only fatigue

    Elastic resistance comes from deforming the band, and its tension increases as the band is stretched, giving low resistance at the start of the movement and the most at the end range. The client's experience is the expected ascending resistance curve, not a technique fault.

    Ref QB-67N3YBSource: McMaster DT, Cronin J, McGuigan M. Forms of Variable Resistance Training. Strength and Conditioning Journal, 2009;31(1):50-64 (rubber-based variable resistance); OpenStax College Physics 2e, section 16.1 Hooke's Law (restoring force rises with deformation)Report a problem with this question

  23. 23. A client doing standing arm sweeps in chest-deep water wants more resistance without adding equipment. Which change increases the water's resistance?

    • A.Hold the breath so the body sinks lower and resistance rises
    • B.Move the arm more slowly and slice the narrow edge of the hand through
    • C.Stand in deeper water so that buoyancy adds to the resistance
    • D.Move the arm faster and push the flat palm squarely through the water✓ Answer

    Drag in water acts against the moving limb and can be raised by moving faster and by presenting a larger surface area, so a faster sweep with the flat palm adds resistance. Buoyancy works the other way, lowering apparent body weight and joint loading, which is why deeper water does not add resistance.

    Ref QB-NPFWCBSource: Kutzner I, Richter A, Gordt K, et al. Does aquatic exercise reduce hip and knee joint loading? In vivo load measurements with instrumented implants. PLoS One (2017), introduction and conclusions on buoyancy and dragReport a problem with this question

Other topics in this exam

Practice questions written to the NSCA-CPT Detailed Content Outline published in the NSCA Certification Handbook and to standard exercise-science material. NSCA-CPT is a mark of the National Strength and Conditioning Association; this site is not affiliated with or endorsed by it. The real exam also includes video and image questions, which this text-only practice cannot show. Confirm current requirements with the NSCA before testing. Nothing here is medical advice; a personal trainer does not diagnose, treat, or prescribe. NSCA certification handbook →