Chapters0/25 ▾
Chapter 4 · Lesson 3 of 5
Active, passive and resisted testing and end feel
1 min read
Active range of motion is tested first because the client controls the movement and stops at their own limit, which is the safest starting point. Passive testing comes next: with the muscles silent, anything that resists or hurts must come from non-contractile, inert tissue such as the capsule, ligaments or a bursa.
Resisted testing isolates contractile tissue, because the muscle works against the therapist while the joint stays still. Passive range is normally slightly greater than active range.
Put the three together. Example: active knee extension hurts, passive extension is full and pain free, and resisted extension brings the pain back. The clean passive range clears the joint, so the problem is in the muscle or tendon.
If the problem were in inert tissue, active and passive motion would be limited in the same direction and to about the same degree. Weak and painless on resisted testing is different: it suggests lost nerve supply or a complete tear and calls for referral, not more massage.
| Abnormal end feel | What the therapist feels | Response |
|---|---|---|
| Empty | Pain stops the motion but there is no mechanical resistance | Refer for medical evaluation |
| Springy block | A rebound before the normal end of range, often with catching | Suggests something loose in the joint; refer |
Check yourself
1. A client's active shoulder abduction is painful and limited, passive abduction is full and pain-free, and resisted abduction reproduces the pain. What does this pattern indicate?
2. The therapist moves a fully relaxed client's shoulder through abduction while the client does nothing. Which tissues does this primarily test?
Facts checked 2026-11-15 · Sources: FSMTB: MBLEx Content Outline
MBLEx Massage Therapy cheat sheet: every key fact on one page →