Quibank app: now on the App Store — free, works offline. Get the app ↗

21 Program Components & Training Variables Practice Questions & Answers

Every Program Components & Training Variables practice question from the ISSA CPT Practice Test (NCCPT-CPT Exam), with the correct answer and a short explanation.

Start practice test →
  1. 1. A client's main lift today is a heavy barbell back squat. Which warm-up fits best before the first working set?

    • A.Ten minutes of static stretching for the legs, holding each for 60 seconds
    • B.One fast, near-maximal single to prime the nervous system right away
    • C.Five minutes of easy cycling, then a few lighter sets of the squat✓ Answer
    • D.Seated leg extensions and curls to failure to pre-fatigue the thigh muscles

    A good warm-up moves from general to specific: light aerobic work raises heart rate and breathing gradually, and federal guidance notes that a warm-up for muscle-strengthening activity commonly uses the same exercises with lighter weight. Long static holds right before lifting are linked to an immediate drop in strength, a near-maximal single before any warm-up skips the gradual build-up, and pre-fatiguing the thighs to failure undercuts the heavy sets that follow.

    Ref QB-NMWBFWSource: Physical Activity Guidelines for Americans (U.S. Department of Health and Human Services), section 'Warm-Up and Cool-Down'; Page, Current Concepts in Muscle Stretching for Exercise and Rehabilitation (Int J Sports Phys Ther, PMC3273886)Report a problem with this question

  2. 2. A client finishes the last hard interval of a vigorous rowing session. Which way of ending the session follows the guidance on cooling down?

    • A.Add a final all-out sprint so the session ends at the highest intensity
    • B.Go straight to heavy core work so the heart rate stays high a while longer
    • C.Step off at once and sit down so the heart rate can drop as fast as possible
    • D.Keep rowing for several minutes at a steadily easier pace before stopping✓ Answer

    A cool-down usually continues the same activity at a lower intensity, which lets heart rate and breathing come down gradually at the end of the session. Stopping abruptly and sitting removes that gradual taper, while a final sprint or heavy core work keeps intensity high instead of bringing it down.

    Ref QB-75FU7YSource: Physical Activity Guidelines for Americans (U.S. Department of Health and Human Services), section 'Warm-Up and Cool-Down'Report a problem with this question

  3. 3. An apparently healthy adult's current plan is treadmill walking plus machine chest presses and biceps curls, three days a week. To make it a balanced program, what should the trainer add?

    • A.A daily stretching routine for the chest and arms, with no other new exercises
    • B.Resistance work for the other major muscle groups, plus balance and agility drills✓ Answer
    • C.Extra sets of chest presses and curls, plus a second arm exercise each session
    • D.Two more treadmill days each week and a longer walk on each of the current days

    For apparently healthy adults, the guidance pairs aerobic training with resistance exercise for each of the major muscle groups and neuromotor work (balance, agility and coordination) on 2 to 3 days a week, plus flexibility work. This plan already has aerobic work but trains only two upper-body muscle groups. More walking, more arm volume or stretching alone leaves the legs, back and core untrained and adds no neuromotor work.

    Ref QB-PM9PMXSource: ACSM Position Stand, Quantity and Quality of Exercise for Developing and Maintaining Cardiorespiratory, Musculoskeletal, and Neuromotor Fitness in Apparently Healthy Adults (Garber et al., Med Sci Sports Exerc), abstract recommendationsReport a problem with this question

  4. 4. A client's upper-body routine is bench press, overhead press and push-ups. Nothing in it trains the upper back. Which change best balances the program?

    • A.Add rows and pulldowns in roughly equal volume to the pressing work✓ Answer
    • B.Add incline presses and lateral raises for fuller shoulder coverage
    • C.Add dips and triceps extensions after the presses in each session
    • D.Add wide, narrow and decline push-ups as extra pressing variations

    A balanced program trains each of the major muscle groups, and the upper back is one of them. Pairing the presses with a similar amount of pulling (rows and pulldowns) trains the opposing muscles and avoids building only the front of the body. Dips, extra push-up variations and more shoulder pressing all add pushing work and leave the back untrained.

    Ref QB-85T6DZSource: ACSM Position Stand, Quantity and Quality of Exercise for Developing and Maintaining Cardiorespiratory, Musculoskeletal, and Neuromotor Fitness in Apparently Healthy Adults (Garber et al., Med Sci Sports Exerc), abstract recommendationsReport a problem with this question

  5. 5. A trainer wants to add neuromotor training to a healthy adult's program on two or three days a week. Which activity fits that category?

    • A.Single-leg balance with reaches, plus agility ladder footwork drills✓ Answer
    • B.Brisk incline walking held at a steady, moderate heart rate for 20 minutes
    • C.Static hamstring and hip flexor stretches held for 30 seconds each side
    • D.Machine leg presses and chest presses for 3 sets of 10 repetitions each

    Neuromotor exercise is training that involves balance, agility and coordination, recommended on 2 to 3 days a week alongside resistance work. Single-leg balance with reaches and ladder footwork challenge exactly those skills. Incline walking is cardiorespiratory training, the held stretches are flexibility training, and the machine presses are resistance training.

    Ref QB-QMMZSYSource: ACSM Position Stand, Quantity and Quality of Exercise for Developing and Maintaining Cardiorespiratory, Musculoskeletal, and Neuromotor Fitness in Apparently Healthy Adults (Garber et al., Med Sci Sports Exerc), abstract recommendationsReport a problem with this question

  6. 6. A client is about to do box jumps and short sprints. After five minutes of light jogging, which preparation best suits the session?

    • A.Leg swings, walking lunges and skips that move through a growing range✓ Answer
    • B.Long static holds for the hamstrings and calves, about 60 seconds each
    • C.Bouncing toe touches that push quickly past the usual end of the range
    • D.Lying on the floor for several minutes so the legs feel fully rested

    Dynamic stretching, which moves the limbs through a progressively larger range in a controlled way, is the recommended warm-up because static stretching before activity can cause a short-term drop in strength and performance. Ballistic bouncing at end range is generally not recommended for most clients because of its injury risk (ACSM reserves it mainly for athletes in ballistic sports), and lying down undoes the rise in body temperature the jog produced.

    Ref QB-956HJ2Source: Page, Current Concepts in Muscle Stretching for Exercise and Rehabilitation (Int J Sports Phys Ther, PMC3273886), sections on dynamic stretching and the clinical summaryReport a problem with this question

  7. 7. A client using hold-relax stretching for the hamstrings finds the near-maximal contraction before each stretch uncomfortable. What should the trainer change?

    • A.Make the contraction last a full 60 seconds before relaxing
    • B.Use a lighter contraction of about 20 to 60% of maximal effort✓ Answer
    • C.Drop the contraction and bounce gently at the end of the range instead
    • D.Contract the hamstrings only after the stretch, never before it

    Hold-relax and contract-relax techniques are usually taught with a strong contraction of the muscle before it is stretched, but research cited in the review found submaximal contractions of 20 or 60% just as effective for increasing range of motion. A lighter contraction keeps the benefit and removes the discomfort. Bouncing is ballistic stretching, which is generally not recommended for most clients, and moving the contraction after the stretch or stretching it to 60 seconds changes the technique without addressing the problem.

    Ref QB-RMYBYZSource: Page, Current Concepts in Muscle Stretching for Exercise and Rehabilitation (Int J Sports Phys Ther, PMC3273886), section on pre-contraction (PNF) stretchingReport a problem with this question

  8. 8. A client enjoys long static stretches and does them right before heavy bench pressing. Where should the trainer move them?

    • A.To the end of the session, after the lifting is finished✓ Answer
    • B.To the very start, before any light cardio or warm-up sets
    • C.Between heavy sets, stretching the chest during each rest period
    • D.To rest days only, never on any day that includes lifting

    Static stretching is generally followed by an immediate decrease in strength, so dynamic movement is recommended for the warm-up and static holds fit best at the end of the session, when the muscles are warm and the heavy work is done. Stretching between heavy sets brings the same strength loss into the middle of the lifting, stretching before any warm-up works on cold tissue, and banning stretching from training days is unnecessary.

    Ref QB-25P6CSSource: Page, Current Concepts in Muscle Stretching for Exercise and Rehabilitation (Int J Sports Phys Ther, PMC3273886), section on stretching and performanceReport a problem with this question

  9. 9. A client wants to foam roll her quadriceps before squatting but worries it will make her legs weaker for the lifts. What does the research evidence suggest?

    • A.Rolling before lifting reliably cuts strength for the rest of the workout
    • B.Short bouts beforehand can add range of motion without hurting performance✓ Answer
    • C.Rolling has no measurable effect on either range of motion or performance
    • D.Rolling helps only when each area is rolled hard for 10 minutes or more

    A systematic review of self-myofascial release found that foam rolling or roller massage may increase joint range of motion in the short term without decreasing muscle performance, and that short bouts before activity had no negative effect on performance. Short rolling bouts therefore fit in the warm-up; the review gives no support for long mandatory durations or for the idea that rolling saps strength.

    Ref QB-HMGZRRSource: Cheatham et al., The Effects of Self-Myofascial Release Using a Foam Roll or Roller Massager on Joint Range of Motion, Muscle Recovery, and Performance: A Systematic Review (Int J Sports Phys Ther, PMC4637917), ConclusionReport a problem with this question

  10. 10. After a very hard leg session, a client asks whether foam rolling is worth doing before she leaves. What does the evidence suggest?

    • A.It works on the upper body only, not on the large muscles of the thighs
    • B.It tends to make later soreness worse when the muscles are already tired
    • C.It may ease perceived soreness and limit the later drop in performance✓ Answer
    • D.It is useful only before exercise and has no role in the hours after it

    The same systematic review concluded that foam rolling and roller massage may attenuate decrements in muscle performance and reduce perceived pain after an intense bout of exercise, so rolling in the cool-down after hard training is reasonable. The studies covered lower-body muscles such as the quadriceps and hamstrings, and none showed rolling making soreness worse.

    Ref QB-99DY9JSource: Cheatham et al., The Effects of Self-Myofascial Release Using a Foam Roll or Roller Massager on Joint Range of Motion, Muscle Recovery, and Performance: A Systematic Review (Int J Sports Phys Ther, PMC4637917), ConclusionReport a problem with this question

  11. 11. A client's tested 1RM on the leg press is 150 kg, and she wants to build local muscular endurance. Using a load range of 40% to 60% of 1RM, what loads should the trainer set?

    • A.120 kg to 135 kg
    • B.90 kg to 120 kg
    • C.60 kg to 90 kg✓ Answer
    • D.40 kg to 60 kg

    Multiply the 1RM by each end of the range: 0.40 × 150 kg = 60 kg and 0.60 × 150 kg = 90 kg. The range of 90 to 120 kg comes from using 60% to 80% instead, 40 to 60 kg reads the percentages as kilograms, and 120 to 135 kg corresponds to 80% to 90%, a heavy strength range. Light-to-moderate loads lifted for more than 15 repetitions with short rest are the pattern for local muscular endurance.

    Ref QB-SRJ5VJSource: ACSM Position Stand, Progression Models in Resistance Training for Healthy Adults (Med Sci Sports Exerc), abstract recommendations, local muscular endurance recommendationReport a problem with this question

  12. 12. An intermediate client's 1RM on the bench press is 100 kg. For explosive bench throws, the trainer uses a light-load power range of 30% to 60% of 1RM for upper-body exercises. What load range is that?

    • A.0 kg to 60 kg
    • B.75 kg to 85 kg
    • C.60 kg to 80 kg
    • D.30 kg to 60 kg✓ Answer

    With a 100 kg 1RM, 30% is 30 kg and 60% is 60 kg. The 0 to 60 kg range is the light-load power range given for lower-body exercises, not upper-body ones; 60 to 80 kg is a moderate hypertrophy-style range; and 75 to 85 kg describes heavier strength-oriented loading. Light power loads are meant to be moved at a fast velocity with 3 to 5 minutes of rest between sets.

    Ref QB-A9RAFKSource: ACSM Position Stand, Progression Models in Resistance Training for Healthy Adults (Med Sci Sports Exerc), abstract recommendations, power training recommendationReport a problem with this question

  13. 13. A program writes tempo in the order eccentric / pause / concentric / pause, in seconds. A client performs 10 repetitions at a tempo of 3/1/2/0. What is the set's total time under tension?

    • A.6 seconds
    • B.60 seconds✓ Answer
    • C.30 seconds
    • D.50 seconds

    Each repetition lasts 3 + 1 + 2 + 0 = 6 seconds, and 10 repetitions × 6 seconds = 60 seconds. The 50-second answer leaves out the 1-second pause, the 30-second answer counts only the 3-second eccentric phase, and 6 seconds is the time for a single repetition rather than the whole set.

    Ref QB-TRWF2MSource: Krzysztofik et al., Maximizing Muscle Hypertrophy: A Systematic Review of Advanced Resistance Training Techniques and Methods (Int J Environ Res Public Health, PMC6950543), section 3.2 Tempo Eccentric TechniqueReport a problem with this question

  14. 14. Using volume load = sets × repetitions × load, what is the volume load of 4 sets of 8 repetitions on a back squat with 60 kg?

    • A.1920 kg✓ Answer
    • B.240 kg
    • C.480 kg
    • D.72 kg

    Multiply all three factors: 4 sets × 8 repetitions × 60 kg = 1920 kg. The 480 kg answer counts only one set (8 × 60), the 240 kg answer multiplies sets by load and skips the repetitions (4 × 60), and 72 kg adds the numbers (4 + 8 + 60) instead of multiplying them.

    Ref QB-B94NMMSource: Krzysztofik et al., Maximizing Muscle Hypertrophy: A Systematic Review of Advanced Resistance Training Techniques and Methods (Int J Environ Res Public Health, PMC6950543), discussion of training volume (sets × repetitions) and volume loadReport a problem with this question

  15. 15. A client who wants larger muscles does one set of each exercise and has stopped making gains. Which change follows the hypertrophy guidance?

    • A.Cut to one set every other session and add an extra rest day
    • B.Keep one set but rest 5 minutes after it before the next exercise
    • C.Keep one set but switch every exercise to a 1-repetition maximum
    • D.Raise the volume by moving to multiple sets of each exercise✓ Answer

    The position stand states that higher-volume, multiple-set programs are recommended for maximizing hypertrophy. A single set provides too little volume once a client is past the novice stage, so adding sets is the direct fix. Switching to 1-repetition maximums, resting longer after one set, or training even less all leave the volume low.

    Ref QB-UR9T7NSource: ACSM Position Stand, Progression Models in Resistance Training for Healthy Adults (Med Sci Sports Exerc), abstract recommendations, hypertrophy recommendationReport a problem with this question

  16. 16. With the same load, a client switches from a 2/0/2/0 tempo to a 6/0/2/0 tempo (eccentric / pause / concentric / pause, in seconds) and takes each set close to fatigue. What should the trainer expect?

    • A.The same repetitions and the same time under tension as before
    • B.More repetitions per set and less time under tension in each set
    • C.Fewer repetitions per set and less time under tension in each set
    • D.Fewer repetitions per set, but more time under tension in each set✓ Answer

    Studies in the review found that a faster tempo such as 2/0/2/0 allows more repetitions to fatigue than a slower one such as 6/0/2/0, while the slower eccentric extends the time under tension, which may contribute to hypertrophy. Each repetition now lasts 8 seconds instead of 4, so the client completes fewer of them, yet the total time the muscle works in the set goes up.

    Ref QB-C9FYSNSource: Krzysztofik et al., Maximizing Muscle Hypertrophy: A Systematic Review of Advanced Resistance Training Techniques and Methods (Int J Environ Res Public Health, PMC6950543), section 3.2 Tempo Eccentric TechniqueReport a problem with this question

  17. 17. A client has 30 minutes and wants to keep her bench press volume high. Which way of pairing exercises does the evidence favor?

    • A.Finish every bench press set first, then every bench pull set, with full rest
    • B.Pair bench press with incline press back to back, resting after each pair
    • C.Alternate bench press sets with bench pull sets, resting after each pair✓ Answer
    • D.Turn the bench press sets into drop sets, cutting the load after each failure

    In the review, pairing the bench press with an opposing-muscle exercise (the bench pull) produced a higher training volume than a traditional exercise order and was more time-efficient. By contrast, pairing the flat bench press with the incline bench press, which works the same muscles, lowered training volume. Doing all sets of one exercise before the other takes longer, and drop sets reduce the load rather than preserving bench press volume.

    Ref QB-VRM5DPSource: Krzysztofik et al., Maximizing Muscle Hypertrophy: A Systematic Review of Advanced Resistance Training Techniques and Methods (Int J Environ Res Public Health, PMC6950543), section on supersets and the pre-exhaustion techniqueReport a problem with this question

  18. 18. A client performs a set of dumbbell chest flyes and goes straight into a set of bench presses with no rest. Which technique is this?

    • A.Pre-exhaustion, a single-joint move before a multi-joint one for the same muscle✓ Answer
    • B.Drop set, the same move continued at a lighter load after reaching fatigue
    • C.Upper-lower pairing, an upper-body move alternated with a lower-body move
    • D.Agonist-antagonist pairing, two moves for opposing muscles done back to back

    Pre-exhaustion means performing a single-joint exercise before a multi-joint exercise for the same muscle group, and the review gives the dumbbell fly before the bench press as its example. The fly fatigues the chest in isolation so the bench press stresses it further. Flyes and bench presses both train the chest, so this is not an opposing-muscle or upper-lower pairing, and two different exercises are not a drop set.

    Ref QB-59YMKDSource: Krzysztofik et al., Maximizing Muscle Hypertrophy: A Systematic Review of Advanced Resistance Training Techniques and Methods (Int J Environ Res Public Health, PMC6950543), section on supersets and the pre-exhaustion techniqueReport a problem with this question

  19. 19. An advanced client's sheet reads: triceps pushdown at 40 kg to fatigue, then immediately 32 kg to fatigue, with no rest between. What is this technique, and what is it mainly used for?

    • A.A pyramid, used mainly to build maximal strength with heavier sets
    • B.A cluster set, used mainly to keep bar speed high for power work
    • C.An antagonist superset, used mainly to train opposing muscles faster
    • D.A drop set, used mainly to raise metabolic stress for hypertrophy✓ Answer

    A drop set takes a set to volitional fatigue, then immediately reduces the load (about 20% is typical) and continues to fatigue again. Here 40 kg drops to 32 kg, a 20% cut, on the same exercise with no rest. The review explains its rationale as high metabolic stress from many repetitions with short rest, a hypertrophy stimulus. A pyramid changes the load from set to set with rest, an antagonist superset uses two exercises for opposing muscles, and a cluster set inserts short rests within a set.

    Ref QB-NR5T6ESource: Krzysztofik et al., Maximizing Muscle Hypertrophy: A Systematic Review of Advanced Resistance Training Techniques and Methods (Int J Environ Res Public Health, PMC6950543), section 3.7 Drop Sets and Sarcoplasma Stimulating TrainingReport a problem with this question

  20. 20. In her second week of training, a novice client asks to add drop sets because she saw them online. What is the best plan?

    • A.Add drop sets to every exercise from this week onward, on all training days
    • B.Build a base with traditional sets first and save drop sets for any later plateaus✓ Answer
    • C.Use drop sets only on the first exercise, where she is freshest and strongest
    • D.Replace her warm-up with drop sets on light loads to save time in each session

    Novices make good progress with traditional sets in the 8- to 12-repetition-maximum range, and the review presents advanced techniques such as drop sets as an extra stimulus that well-trained lifters can use to break through plateaus and prevent monotony. Adding them to everything now, or putting them on the first heavy exercise, adds fatigue a beginner does not need, and drop sets cannot replace a warm-up.

    Ref QB-YQFU3VSource: Krzysztofik et al., Maximizing Muscle Hypertrophy: A Systematic Review of Advanced Resistance Training Techniques and Methods (Int J Environ Res Public Health, PMC6950543), Conclusions; ACSM Position Stand, Progression Models in Resistance Training for Healthy Adults (Med Sci Sports Exerc), abstract recommendations, novice loading recommendationReport a problem with this question

  21. 21. A busy client pairs dumbbell lunges with dumbbell shoulder presses, doing one set of each back to back before resting. What does this upper-lower pairing offer compared with traditional sets?

    • A.Heavier loads on each lift than she could use with traditional sets
    • B.Greater fatigue of one target muscle, as in a pre-exhaustion pairing
    • C.More work per minute, with each area resting during the other area's set✓ Answer
    • D.A pure power stimulus, with both moves done at maximal bar speed

    The review reports that upper-lower body pairings, like agonist-antagonist pairings, were more time-efficient than traditional sets, moving more kilograms per minute. While the legs work, the shoulders recover, and the reverse. The lunge and the press train different muscles, so this is not pre-exhaustion, and nothing about the pairing raises the loads or makes it a power stimulus.

    Ref QB-F8APGUSource: Krzysztofik et al., Maximizing Muscle Hypertrophy: A Systematic Review of Advanced Resistance Training Techniques and Methods (Int J Environ Res Public Health, PMC6950543), section on supersets and the pre-exhaustion techniqueReport a problem with this question

Other topics in this exam

Practice questions written to the published NCCPT-CPT Exam Content Outline and to standard exercise-science material. ISSA is a mark of the International Sports Sciences Association and NCCPT-CPT is a credential of the National Council for Certified Personal Trainers; this site is not affiliated with or endorsed by either. Exam content outlines are revised after each job task analysis, so confirm current requirements with NCCPT before testing. Nothing here is medical advice; a personal trainer does not diagnose, treat, or prescribe. About the NCCPT-CPT exam →