37 Science: Physical & Earth Science Practice Questions & Answers
Every Science: Physical & Earth Science practice question from the HiSET Practice Test, with the correct answer and a short explanation.
Start practice test →Practice tests
1. A particle has 17 protons, 18 neutrons, and 18 electrons. Which description of this particle is correct?
- A.A positive ion of element 17, with a mass number of 36
- B.A neutral atom of element 17, with a mass number of 53
- C.A negative ion of element 17, with a mass number of 35✓ Answer
- D.A neutral atom of element 18, with a mass number of 35
The number of protons identifies the element, so 17 protons means element 17. The mass number counts only protons and neutrons: 17 + 18 = 35. With one more electron (18) than protons (17), the particle carries a net charge of -1, so it is a negative ion. Electrons are not counted in the mass number.
Ref QB-KG8TT4Source: Atomic structure: atomic number = protons; mass number = protons + neutrons; ions differ from neutral atoms in electron count; HiSET Test at a Glance, Science, Content CategoryReport a problem with this question
2. A student has two gold-colored mineral samples and thinks they are the same mineral. She tests them. Sample 1 leaves a greenish-black streak on a porcelain plate and has a hardness of about 6 on the Mohs scale. Sample 2 leaves a golden-yellow streak and has a hardness of about 2.5. Which conclusion is best supported?
- A.They are different minerals, since their streak and hardness differ✓ Answer
- B.They are the same mineral, since color is the most reliable property
- C.They are the same mineral, since hardness changes with a sample's size
- D.They are different minerals, since Sample 2 is too soft to be a mineral
Streak and hardness are characteristic of a mineral and stay the same from sample to sample, while outer color can be shared by unrelated minerals and is the least reliable clue. Because these two samples differ in both streak and hardness, they are different minerals. Hardness does not depend on sample size, and many minerals are softer than 2.5 (talc is 1 on the Mohs scale).
Ref QB-5ZRAK6Source: Mineral identification by streak and Mohs hardness (color is least reliable); HiSET Test at a Glance, Science, Content Category (properties of earth materials)Report a problem with this question
3. To model acid rain, a student places a 10.0 g piece of chalk in a beaker of vinegar and an identical 10.0 g piece in a beaker holding the same amount of plain water. After 24 hours, the chalk in vinegar has a mass of 6.2 g and the chalk in water has a mass of 9.9 g. What is the main purpose of the beaker of plain water?
- A.It is the dependent variable that the student changes on purpose
- B.It shows how much mass chalk loses without the acid, for comparison✓ Answer
- C.It doubles the sample size so that the vinegar result is more reliable
- D.It keeps the air humid so that the vinegar does not dry up overnight
The plain-water beaker is the control: it gives a baseline (a loss of only 0.1 g) so the student can tell that the much larger loss in vinegar (3.8 g) comes from the acid and not just from soaking in a liquid. The dependent variable is the measured mass, not something the student changes; one extra beaker under a different condition is not a repeat of the vinegar trial.
Ref QB-MGK5Z5Source: Chemical weathering by acids; control groups as a baseline; HiSET Test at a Glance, Science: Content Category and Process CategoryReport a problem with this question
4. Astronomers observe a star that began with about the same mass as the Sun and has now used up the hydrogen in its core. Its diameter has grown to about 100 times the Sun's, its surface has cooled to about 3,500 K, and it glows reddish. Which stage of its life cycle is this star most likely in?
- A.A protostar, a young star still collapsing from a cloud of gas and dust
- B.A red giant, a star that has swelled after its core hydrogen ran out✓ Answer
- C.A white dwarf, the small hot core left after its outer layers drift off
- D.A main-sequence star, still fusing hydrogen into helium in its core
When a Sun-like star runs out of hydrogen in its core, it leaves the main sequence and its outer layers expand and cool, making it huge, cool, and red: a red giant. A main-sequence star is still fusing core hydrogen, a white dwarf is small and hot rather than 100 times the Sun's size, and a protostar has not yet begun to fuse hydrogen at all.
Ref QB-6Z4NR7Source: Stellar life cycle of a Sun-like star (main sequence, red giant, white dwarf); HiSET Test at a Glance, Science, Content Category (interpret data to identify the stages in the life cycle of a star)Report a problem with this question
5. A student wraps insulated wire around an iron nail and connects the wire to the same 1.5 V battery each time. With 10, 20, 30, and 40 turns of wire, the nail picks up 4, 9, 13, and 18 paper clips. Which conclusion is supported by these data?
- A.A stronger battery is what caused the nail to pick up more clips
- B.Within the range tested, more turns of wire made a stronger magnet✓ Answer
- C.The number of clips picked up decides how many turns the wire has
- D.A nail with 200 turns of wire would certainly pick up 90 paper clips
The number of turns was the only thing changed (the battery stayed the same), and the clip count rose steadily from 4 to 18, so within 10-40 turns more coils gave a stronger electromagnet. Predicting exactly 90 clips at 200 turns extrapolates far beyond the tested range, the battery was held constant, and the clip count is the result, not the cause.
Ref QB-NGXF67Source: Electromagnets: field strength increases with the number of coil turns and the current; HiSET Test at a Glance, Science: Content Category and Process CategoryReport a problem with this question
6. A worker pushes a crate across a level floor with a steady horizontal force of 150 N. Measurements show that the crate moves in a straight line at a constant speed of 2 m/s. What is the friction force on the crate?
- A.150 N, pointing opposite to the push, so the net force is zero✓ Answer
- B.Zero, because a crate at constant speed has no forces acting on it
- C.150 N, pointing the same way as the push, so the two forces add
- D.Less than 150 N, because the push must be larger to keep it moving
Constant velocity means zero acceleration, and by Newton's second law (net force = mass x acceleration) zero acceleration means zero net force. The forces are balanced, so friction must equal the 150 N push and point the opposite way. Balanced forces do not require the object to be at rest; a larger push would make the crate speed up.
Ref QB-7ZFYW8Source: Newton's first and second laws of motion (balanced forces give constant velocity; F = ma); HiSET Test at a Glance, Science, Content CategoryReport a problem with this question
7. After an unusually cold week, a radio caller says, "This was the coldest week our town has had in ten years, so the climate here must be getting colder." Which statement best evaluates the caller's claim?
- A.It is not supported, because only summer temperatures count toward climate
- B.It is well supported, because weather and climate are two names for one thing
- C.It is not supported, because one week of weather cannot show a climate trend✓ Answer
- D.It is well supported, because a ten-year record is enough to define a climate
Weather is the condition of the atmosphere over hours to days, while climate is the long-term average pattern of weather, usually judged over about 30 years or more. A single cold week is one data point of weather, so it cannot establish a climate trend; the claim overgeneralizes. Climate includes all seasons, not just summer.
Ref QB-PGATB8Source: Weather vs. climate (climate = long-term average, conventionally 30-year normals per NOAA/WMO); HiSET Test at a Glance, Science: Content Category and Process CategoryReport a problem with this question
8. A geologist compares two igneous rocks. Granite has large mineral crystals that are easy to see without a lens, while basalt has crystals too small to see without a microscope. Which explanation best accounts for the difference in crystal size?
- A.Granite was changed by heat and pressure, while basalt was never changed
- B.Granite formed from pressed sediments, while basalt formed from melted rock
- C.Granite is much older, and the crystals in a rock keep growing larger with age
- D.Granite cooled slowly deep underground, while basalt cooled fast at the surface✓ Answer
Both are igneous rocks, formed when molten rock cools. Magma that cools slowly deep underground (intrusive rock such as granite) gives crystals time to grow large, while lava that cools quickly at the surface (extrusive rock such as basalt) forms tiny crystals. Rocks made from pressed sediments are sedimentary, rocks changed by heat and pressure are metamorphic, and crystals in solid rock do not keep growing with age.
Ref QB-FGTF5YSource: Rock cycle: intrusive vs. extrusive igneous rocks and cooling rate; HiSET Test at a Glance, Science, Content CategoryReport a problem with this question
9. In an electromagnet investigation, an iron nail wrapped with 30 turns of wire holds 13 paper clips while the wire is connected to a battery. When the student disconnects one end of the wire from the battery, almost all of the clips fall off. What does this observation best show?
- A.The magnetic force comes from the electric current moving through the wire✓ Answer
- B.The wire's coating blocks magnetism only when the battery is turned off
- C.The battery is itself a magnet that pulls on the clips through the nail
- D.The paper clips lost the iron in them when the wire was disconnected
Opening the circuit stops the current, and the magnetism disappears with it, which shows that moving electric charges (a current) produce the magnetic force. The clips are unchanged, a battery is not a magnet, and the insulation is the same whether or not current flows.
Ref QB-AKZFMQSource: HiSET Test at a Glance, Science, Content Category (demonstrate that moving electric charges produce magnetic forces)Report a problem with this question
10. Lithium, sodium, and potassium are in the same group (column) of the periodic table, listed here from top to bottom. In water, lithium fizzes slowly, sodium fizzes rapidly and melts into a ball, and potassium reacts violently and bursts into flame. Rubidium is the next element below potassium in this group. Which prediction is best supported?
- A.Rubidium will react slowly, since heavier atoms react less with water
- B.Rubidium will not react with water, because its outer shell is full
- C.Rubidium will react just like sodium, since a whole group is identical
- D.Rubidium will react with water even more violently than potassium✓ Answer
Elements in one group have the same number of outermost electrons (one, for these alkali metals), so they react in similar ways, and the trend in the data is that reactivity rises going down the group. Following that trend, rubidium should react even more violently than potassium. A full outer shell describes noble gases, and members of a group are similar, not identical.
Ref QB-T37N7RSource: Periodic table groups share valence-electron patterns; HiSET Test at a Glance, Science, Content Category (properties of elements are based on the electrons in the outermost energy level)Report a problem with this question
11. A geologist describes the rock layers in a cliff, from bottom to top: sandstone, shale containing trilobite fossils, limestone, a thin layer of volcanic ash dated by radiometric methods at 250 million years old, and sandstone at the top. The layers are flat and show no sign of folding or overturning. What can be concluded about the age of the limestone?
- A.Its age cannot be estimated, because the limestone holds no fossils
- B.It is exactly 250 million years old, because it touches the ash layer
- C.It is younger than 250 million years, because it lies above the shale
- D.It is older than 250 million years, because it lies below the dated ash✓ Answer
By the law of superposition, in undisturbed layers each layer is older than the layers above it. The limestone lies beneath the ash dated at 250 million years, so it must be older than 250 million years. Lying above the shale only makes it younger than the shale, touching the ash does not make the ages equal, and a dated layer above it allows an estimate even without fossils.
Ref QB-BKCTSRSource: Law of superposition and relative vs. radiometric dating; HiSET Test at a Glance, Science, Content Category (Earth's systems, processes, geologic structures, and time)Report a problem with this question
12. A geologist uses the law of superposition to put the rock layers of a cliff in order from oldest to youngest. She writes four statements in her report. Which statement is an assumption that her reasoning depends on, rather than an observation or a conclusion?
- A.The layers have not been overturned since they were deposited✓ Answer
- B.The volcanic ash layer is the thinnest layer exposed in the cliff
- C.The bottom sandstone is older than the limestone that lies above it
- D.The shale layer in the middle of the cliff contains trilobite fossils
Superposition only gives correct ages if the layers are still in the order they were laid down, so the reasoning takes that as given without measuring it: that is an assumption. The fossils in the shale and the thickness of the ash are things she saw or measured (observations), and the sandstone being older than the limestone is the inference she draws from the layers' positions (a conclusion).
Ref QB-U3JYCSSource: HiSET Test at a Glance, Science: Process Category (distinguish among hypotheses, assumptions, data, and conclusions); Content CategoryReport a problem with this question
13. A student times how long one antacid tablet takes to stop fizzing in 200 mL of water at four temperatures: 120 s at 10 °C, 70 s at 25 °C, 40 s at 40 °C, and 25 s at 55 °C. She now wants to test whether surface area also affects the reaction rate. Which procedure would best test this?
- A.Put whole tablets in 100 mL and in 200 mL of water, both kept at 25 °C
- B.Put a crushed tablet and a whole tablet each in 200 mL of 25 °C water✓ Answer
- C.Put two whole tablets together in 200 mL of 25 °C water and time them
- D.Put a whole tablet in 10 °C water and a crushed tablet in 55 °C water
A fair test changes only one variable. Crushing one tablet and leaving the other whole changes surface area while the water volume and temperature stay the same, so any difference in time can be traced to surface area. Changing temperature at the same time mixes two causes, and changing the water volume or the number of tablets tests something other than surface area.
Ref QB-CKQ5YSSource: Reaction-rate factors (temperature, surface area, concentration, catalysts); HiSET Test at a Glance, Science: Content Category and Process Category (select the best procedure)Report a problem with this question
14. A harbor records its tidal range (the difference between high tide and low tide) for one month. The range is largest, about 2.4 m, on the days of the new moon and the full moon, and smallest, about 1.1 m, at the first-quarter and third-quarter moons. Which explanation best accounts for this pattern?
- A.At full moon the Moon is always closest to Earth, so its pull is the strongest
- B.At new and full moon, the Sun, Earth, and Moon line up and their pulls combine✓ Answer
- C.At new and full moon, Earth's tilt points the harbor straight at the Moon
- D.At the quarter moons, the Moon's sunlit half blocks part of its gravity
Tides are caused mainly by the Moon's gravity, with a smaller pull from the Sun. At new and full moon the Sun, Earth, and Moon are in a line, so the two pulls add and produce spring tides with the largest range; at the quarter moons they pull at right angles and produce neap tides. The Moon's distance does not line up with its phases, and sunlight does not block gravity.
Ref QB-V3WAJTSource: Tides: spring tides at new/full moon (Sun-Earth-Moon aligned), neap tides at quarter moons; HiSET Test at a Glance, Science, Content Category (Earth's movements and position in the solar system)Report a problem with this question
15. A sealed glass terrarium holds moist soil and a few small plants. On a sunny afternoon, the inside of the cooler glass lid becomes covered with water droplets, which later drip back onto the soil. Which water-cycle processes produce the droplets on the lid?
- A.Water vapor from outside leaks through the glass, then precipitates
- B.Water soaks into the soil by infiltration, then rises up as runoff
- C.Water evaporates from the soil and transpires from plants, then condenses✓ Answer
- D.Water in the soil freezes onto the lid and then melts back into drops
Sunlight warms the soil and plants, so liquid water becomes water vapor by evaporation from the soil and transpiration from the leaves. When the vapor touches the cooler lid it loses energy and condenses into droplets, which then fall back like precipitation. Glass does not let vapor through, nothing freezes on a sunny afternoon, and runoff flows over the ground rather than rising.
Ref QB-DK3G5USource: Water cycle: evaporation, transpiration, condensation, precipitation; HiSET Test at a Glance, Science, Content CategoryReport a problem with this question
16. Nearly all of the air is pumped out of a tall glass tube. A coin and a feather are then released at the same moment from the top of the tube. Which result is expected, and why?
- A.Both land together, because gravity gives them the same acceleration✓ Answer
- B.The coin lands first, because heavier objects fall with more acceleration
- C.Neither one falls, because without air nothing pulls them downward
- D.The feather lands first, because light objects fall faster with no air
Air resistance is what slows the feather in ordinary air. With the air removed, the only force is gravity, and gravity gives every object the same acceleration (about 9.8 m/s² near Earth's surface) regardless of mass, so both fall side by side. Gravity does not depend on air.
Ref QB-W39NQUSource: Free fall: acceleration due to gravity (about 9.8 m/s²) is independent of mass when air resistance is absent; HiSET Test at a Glance, Science, Content CategoryReport a problem with this question
17. A student releases the same toy car from rest at the top of a ramp set to heights of 20 cm, 40 cm, and 60 cm. At each height she runs three trials and measures the car's speed at the bottom with a motion sensor. Her average speeds are 1.9 m/s, 2.8 m/s, and 3.4 m/s. Why did the student run three trials at each height and average the results?
- A.To test a different independent variable in each of the three trials
- B.To reduce the effect of random errors in any single measurement✓ Answer
- C.To make sure the car's speed rises from each trial to the next
- D.To create a control group that the other heights can be compared with
Any one release can be off because of small differences in how the car is let go or read by the sensor; averaging repeated trials at the same conditions lets those random errors partly cancel, which makes the result more reliable. Repeated trials are not a control group, they do not change the variable being tested, and they are not meant to make the speed rise.
Ref QB-6KK5XJSource: HiSET Test at a Glance, Science: Process Category (identify reasons for a procedure and analyze limitations)Report a problem with this question
18. A student releases the same toy car from rest at the top of a ramp set to heights of 20 cm, 40 cm, and 60 cm. At each height she runs three trials and measures the car's speed at the bottom with a motion sensor. Her average speeds are 1.9 m/s, 2.8 m/s, and 3.4 m/s. Which research question does this investigation answer?
- A.How does the motion sensor's position affect the speed it records
- B.How does the mass of the car affect its speed at the bottom of the ramp
- C.How does the car's speed at the bottom affect the height of the ramp
- D.How does the height of the ramp affect the speed of the car at the bottom✓ Answer
The student changed only the ramp height (the independent variable) and measured the speed at the bottom (the dependent variable), so the question is how height affects speed. The mass did not change because she used the same car, the sensor position was not varied, and reversing the question confuses cause with effect.
Ref QB-P3SAHKSource: HiSET Test at a Glance, Science: Process Category (discern an appropriate research question); Content Category (position and motion of objects)Report a problem with this question
19. In a ripple tank, a paddle makes 4 waves every second, and the distance from one wave crest to the next is 0.05 m. Wave speed equals frequency multiplied by wavelength. What is the speed of these waves?
- A.0.2 m/s✓ Answer
- B.4.05 m/s
- C.0.0125 m/s
- D.80 m/s
Four waves per second is a frequency of 4 Hz, and the crest-to-crest distance is the wavelength, 0.05 m. Speed = 4 Hz x 0.05 m = 0.2 m/s. Dividing (0.05 / 4), dividing the other way (4 / 0.05), or adding the two numbers does not follow the wave equation.
Ref QB-Z24CE2Source: Wave equation: wave speed = frequency x wavelength; HiSET Test at a Glance, Science, Content Category (principles of light, heat, electricity, and magnetism)Report a problem with this question
20. A student adds 1.0 g of manganese dioxide powder to a beaker of hydrogen peroxide solution. The solution, which had been giving off only a few bubbles, suddenly bubbles rapidly as oxygen gas forms. When the bubbling stops, she filters out the powder, dries it, and finds that its mass is still 1.0 g. Which interpretation is best supported?
- A.The manganese dioxide gave energy that was used up in the reaction
- B.The manganese dioxide was a reactant that changed into oxygen gas
- C.The manganese dioxide sped up the reaction without being used up✓ Answer
- D.The manganese dioxide was a product made from the hydrogen peroxide
The reaction speeded up sharply when the powder was added, yet the same 1.0 g of powder was recovered afterward. A substance that increases a reaction's rate without being consumed is a catalyst. A reactant or a fuel would be used up, and a product would have increased in mass rather than staying at 1.0 g.
Ref QB-GJW6UZSource: Catalysts increase reaction rate and are not consumed; HiSET Test at a Glance, Science, Content Category (principles of chemical reactions)Report a problem with this question
21. Scientists studying one coastal region record a deep ocean trench offshore, a chain of active volcanoes about 200 km inland, and earthquakes that occur at greater and greater depths the farther inland they are located. Which kind of plate boundary best explains these observations?
- A.A transform boundary, where two plates slide past each other sideways
- B.A divergent boundary, where two plates pull apart and new crust forms
- C.A convergent boundary, where one plate sinks down beneath the other plate✓ Answer
- D.A hot spot in the middle of a plate, far away from any plate boundary
A trench, a line of volcanoes parallel to it, and earthquakes that get deeper inland are the signature of subduction at a convergent boundary: the sinking plate bends down beneath the other, earthquakes follow it to depth, and melting above it feeds the volcanoes. Divergent boundaries form ridges and rifts, transform boundaries produce shallow earthquakes without trenches, and a hot spot lies away from plate edges.
Ref QB-23FPK3Source: Plate tectonics: convergent (subduction) boundaries produce trenches, volcanic arcs, and deepening earthquakes; HiSET Test at a Glance, Science, Content CategoryReport a problem with this question
22. A student heats 10.0 g of calcium carbonate (CaCO3) in an open crucible. The solid breaks down into solid calcium oxide (CaO) and carbon dioxide gas (CO2), and the gas escapes into the air. After heating, the solid left in the crucible has a mass of 5.6 g. What mass of carbon dioxide was produced?
- A.5.6 g
- B.4.4 g✓ Answer
- C.10.0 g
- D.15.6 g
By the law of conservation of mass, atoms are only rearranged in a reaction, so the total mass of the products equals the mass of the reactant: 10.0 g = 5.6 g of CaO + mass of CO2, which gives 4.4 g of CO2. The solid seems to lose mass only because the gas escaped. 5.6 g is the leftover solid, not the gas; 10.0 g assumes all of the reactant became gas; 15.6 g adds the masses instead of subtracting.
Ref QB-HJ9HZ2Source: Law of conservation of matter (balanced equations have equal atoms of each element on both sides); OpenStax Chemistry 2e, Section 4.1 Writing and Balancing Chemical Equations; HiSET Test at a Glance (PSI 2025), Science Content Category II.5 (principles of chemical reactions)Report a problem with this question
23. A student dissolves 20 g of solid ammonium nitrate in 100 mL of water in an insulated foam cup. A thermometer shows the water temperature falling from 22 °C to 9 °C as the solid dissolves. Which statement correctly describes this process?
- A.Exothermic, because it releases cold into the water
- B.Exothermic, because the temperature changed sharply
- C.Endothermic, because it absorbs heat from the water✓ Answer
- D.Neither, because dissolving only changes the state
In an endothermic process the system takes in thermal energy from its surroundings, so the surrounding water gets colder; that is exactly what the falling temperature shows, and it is why instant cold packs use ammonium nitrate. "Cold" is not a substance that can be released; heat simply flows out of the water into the dissolving solid. A large temperature change alone does not mean exothermic (an exothermic process would make the water warmer), and a temperature change shows that energy was transferred, so the process is not "neither."
Ref QB-33TZR4Source: Endothermic processes absorb heat from the solution and lower its temperature; ammonium nitrate cold pack example; OpenStax Chemistry 2e, Section 5.2 Calorimetry; HiSET Test at a Glance (PSI 2025), Science Content Category II.5Report a problem with this question
24. On a level, low-friction track, a 2 kg cart rolling at 3 m/s strikes a 1 kg cart that is at rest. The two carts latch together and roll off as one unit. Assuming no outside forces act along the track, what is the speed of the joined carts just after the collision?
- A.1 m/s
- B.1.5 m/s
- C.2 m/s✓ Answer
- D.3 m/s
With no net external force, the system is isolated and its total momentum (p = mv) is conserved. Before the collision the momentum is 2 kg x 3 m/s = 6 kg·m/s; afterward the same 6 kg·m/s is shared by 3 kg of carts, so v = 6 / 3 = 2 m/s. Speed, not momentum, is what changes: 3 m/s assumes speed is conserved, 1.5 m/s simply halves the speed because there are two carts, and 1 m/s divides the original speed by the total mass.
Ref QB-JJMU64Source: Conservation of momentum for an isolated system (net external force = 0); OpenStax College Physics 2e, Section 8.3 Conservation of Momentum and Section 8.5 Inelastic Collisions in One Dimension (objects that stick together); HiSET Test at a Glance (PSI 2025), Science Content Category II.2Report a problem with this question
25. A reference table lists the typical wavelength of four kinds of electromagnetic radiation: microwaves, about 1 cm; infrared, about 0.01 mm; ultraviolet, about 100 nm; and X-rays, about 0.1 nm. All electromagnetic waves travel through a vacuum at the same speed. Which kind of radiation in the table has the highest frequency?
- A.Microwaves, at 1 cm
- B.Infrared, at 0.01 mm
- C.Ultraviolet, at 100 nm
- D.X-rays, at 0.1 nm✓ Answer
For every electromagnetic wave, speed = frequency x wavelength (c = f x lambda), and c is the same for all of them in a vacuum. So frequency and wavelength are inversely related: the shortest wavelength has the highest frequency. X-rays, at about 0.1 nm, have the shortest wavelength in the table, so they have the highest frequency. Microwaves have the longest wavelength and therefore the lowest frequency of the four; picking them confuses wavelength with frequency.
Ref QB-436CX5Source: Electromagnetic spectrum: the higher the frequency, the shorter the wavelength (c = f x lambda); OpenStax College Physics 2e, Section 24.3 The Electromagnetic Spectrum; HiSET Test at a Glance (PSI 2025), Science Content Category II.3Report a problem with this question
26. A lab tracks how much of a radioactive isotope remains in a sealed sample. The records show 96 g at day 0, 48 g at day 8, and 24 g at day 16. If this pattern continues, how much of the isotope will remain at day 32?
- A.6 g✓ Answer
- B.12 g
- C.0 g
- D.3 g
The amount halves every 8 days, so the half-life is 8 days; a half-life is the time for half of the remaining atoms to decay, and each half-life removes half of what is left, not a fixed number of grams. Day 32 is four half-lives: 96 -> 48 -> 24 -> 12 -> 6 g. 12 g is the amount at day 24 (one half-life short), 3 g counts one half-life too many, and 0 g comes from drawing a straight line through the data, which does not fit a halving pattern.
Ref QB-KJY6C5Source: Half-life: the time required for half of the atoms in a sample to decay (constant for each nuclide, first-order decay); OpenStax Chemistry 2e, Section 21.3 Radioactive Decay; HiSET Test at a Glance (PSI 2025), Science Content Category II.4Report a problem with this question
27. A student measures a small plastic block. Its mass is 45 g. When she pushes it completely under the water in a graduated cylinder, the water level rises from 50.0 mL to 100.0 mL. Water has a density of 1.00 g/mL. What is the block's density, and what will the block do when she lets go of it in water?
- A.1.11 g/mL, so it sinks
- B.0.45 g/mL, so it floats
- C.0.90 g/mL, so it sinks
- D.0.90 g/mL, so it floats✓ Answer
Density = mass / volume. The block's volume is the water it displaces, 100.0 - 50.0 = 50.0 mL, so its density is 45 g / 50.0 mL = 0.90 g/mL. An object less dense than the liquid floats and a denser one sinks, so a 0.90 g/mL block floats in 1.00 g/mL water. 1.11 g/mL divides volume by mass, 0.45 g/mL uses the final water level (100 mL) instead of the change, and "0.90 g/mL, so it sinks" gets the density right but reverses the float rule.
Ref QB-53HP47Source: Density = mass/volume; volume by water displacement; the denser iron block sinks and the less dense wood block floats; OpenStax Chemistry 2e, Section 1.4 Measurements (Density, Example 1.1); HiSET Test at a Glance (PSI 2025), Science Content Category II.1Report a problem with this question
28. A student records two facts. First, Earth is about 147 million km from the Sun in early January and about 152 million km from it in early July. Second, early January is winter in Chicago (Northern Hemisphere) but summer in Sydney, Australia (Southern Hemisphere). Which conclusion do these facts best support?
- A.Distance from the Sun is not what causes seasons✓ Answer
- B.Seasons happen when Earth is nearest the Sun
- C.Both hemispheres have summer in early January
- D.Earth's orbit around the Sun is a perfect circle
Earth is closest to the Sun in January, yet that is the middle of winter in the Northern Hemisphere, and at that one distance the two hemispheres have opposite seasons. Distance therefore cannot be the cause; seasons come from the 23.5-degree tilt of Earth's axis, which changes how directly sunlight strikes each hemisphere. The data contradict "seasons happen when Earth is nearest," show Chicago in winter (not both hemispheres in summer), and show the distance changing, so the orbit is not a perfect circle.
Ref QB-MJBHH6Source: Seasons are caused by the 23.5-degree tilt of Earth's axis, not by Earth-Sun distance (Earth is closest to the Sun in January; hemispheres have opposite seasons); OpenStax Astronomy 2e, Section 4.2 The Seasons; HiSET Test at a Glance (PSI 2025), Science Content Category III.3Report a problem with this question
29. Astronomers study three planets orbiting the same star. Planet A orbits at an average distance of 1 AU and takes 1 year to go around once. Planet B orbits at 4 AU and takes 8 years. Planet C orbits at 9 AU and takes 27 years. Which statement is supported by these data?
- A.Period is directly proportional to distance
- B.Farther planets have longer orbital periods✓ Answer
- C.Farther planets move faster along their orbits
- D.Planet C has a shorter year than Planet B
The periods rise as the distances rise (1, 8, and 27 years at 1, 4, and 9 AU), which matches Kepler's third law: the square of the period is proportional to the cube of the orbit's size (1x1 = 1x1x1; 8x8 = 4x4x4; 27x27 = 9x9x9). It is not a direct proportion, because 4 times the distance gives 8 times the period, not 4 times. Farther planets actually move slower: Planet B travels 4 times as far in 8 times as long. Planet C's 27-year year is longer than B's 8 years.
Ref QB-GQZSNXSource: Kepler's third law: the square of a planet's orbital period is directly proportional to the cube of the semimajor axis of its orbit; OpenStax Astronomy 2e, Section 3.1 The Laws of Planetary Motion; HiSET Test at a Glance (PSI 2025), Science Content Category III.3Report a problem with this question
30. In a laboratory, glowing hydrogen gas gives off a bright spectral line at a wavelength of 656 nm. An astronomer finds the same hydrogen line at 670 nm in the light from Galaxy X and at 700 nm in the light from Galaxy Y. Which conclusion is best supported by these measurements?
- A.Both are moving toward us, and Y is coming faster
- B.Both are moving away, and X is moving away faster
- C.Neither is moving; both galaxies are just cooler
- D.Both are moving away, and Y is moving away faster✓ Answer
Both lines are shifted to longer wavelengths than the 656 nm lab value, which is a redshift, and a redshift means the source is moving away from us. The greater the motion, the greater the Doppler shift: Galaxy Y's line moved 44 nm and Galaxy X's moved 14 nm, so Y is receding faster. Motion toward us would shorten the wavelength (a blueshift). A cooler object changes the overall color of its glow, but it does not move a specific hydrogen line away from its fixed 656 nm position.
Ref QB-Z77Y8YSource: Redshift: spectral lines displaced toward longer wavelengths when the source moves away; the greater the motion, the greater the Doppler shift; OpenStax Astronomy 2e, Section 26.5 The Expanding Universe and Section 5.6 The Doppler Effect; HiSET Test at a Glance (PSI 2025), Science Content Category III.4Report a problem with this question
31. At 11 p.m. in Chicago, observers watch the full Moon slowly darken to a dim coppery color over about an hour and then brighten again. At that same moment it is midday in Tokyo, and observers there see nothing unusual in the sky. Which explanation accounts for both observations?
- A.The Moon passed into Earth's shadow, seen wherever it is night✓ Answer
- B.The Moon passed in front of the Sun, seen only on a narrow path
- C.The Sun's light dimmed for an hour, seen from every place on Earth
- D.The Moon passed behind thick dust, seen only from North America
A full Moon darkening for about an hour is a lunar eclipse: Earth lies between the Sun and the Moon, and the Moon moves through Earth's shadow. Anyone who can see the Moon, which means anyone on the night side of Earth, can watch it, while Tokyo is on the day side where the Moon is not up. The Moon passing in front of the Sun is a solar eclipse, which happens at new Moon and darkens the Sun, not the Moon. A dimming of the Sun itself would have been noticed in daytime Tokyo, and nothing in the observations points to dust over one continent.
Ref QB-FQNFGWSource: Lunar eclipse: the Moon passes into Earth's shadow (umbra) and is seen from the entire night side of Earth, while a solar eclipse is seen only in limited local areas; OpenStax Astronomy 2e, Section 4.7 Eclipses of the Sun and Moon; HiSET Test at a Glance (PSI 2025), Science Content Category III.3Report a problem with this question
32. On a sunny afternoon at a beach, the sand reaches 40 °C while the sea surface stays near 22 °C. The air just above the sand warms quickly. All afternoon, a cool breeze blows from the sea toward the land at ground level. Which process best explains this breeze?
- A.Conduction, as cold passes from the water across the sand to land
- B.Radiation, as sunlight reflected off the water pushes air ashore
- C.Convection, as warm air over the sand rises and sea air moves in✓ Answer
- D.Convection, as cool air over the sea rises and drifts toward land
Convection is heat transfer by the movement of a fluid such as air. Air warmed by the hot sand expands, becomes less dense than the surrounding air, and rises; the cooler, denser air over the sea flows in along the ground to replace it, which is the sea breeze. Cooler air sinks rather than rises, 'cold' is not something that flows, and reflected sunlight does not push air.
Ref QB-Y7UM3XSource: OpenStax Physics, Section 11.2 (Heat Transfer): convection is heat transfer by the movement of a fluid; hot air rises because it is less dense; atmospheric circulation is natural convectionReport a problem with this question
33. A student fills four mugs of the same size and shape with 200 mL of water at 80 °C. Each mug is made of a different material and has a lid of that material. All four sit on the same table in a 21 °C room. After 15 minutes the water temperatures are: aluminum 52 °C, glass 61 °C, ceramic 64 °C, and foam 74 °C. Which conclusion do these results best support?
- A.Foam slowed heat loss from the water the most of the four✓ Answer
- B.Aluminum lost heat fastest mainly by giving off radiation
- C.Aluminum cooled the water by passing cold into it fastest
- D.Foam would keep any hot liquid warmest at any temperature
Only the mug material changed, so the material explains the differences: the foam mug's water dropped just 6 °C, the least of the four, so foam slowed heat loss the most. Metals such as aluminum are good heat conductors, so heat moved out through the aluminum fastest; the data measure only temperature, so they cannot show that radiation was the main pathway. Heat flows from hot to cold, not 'cold' into water, and one test at one starting temperature cannot support a claim about every liquid and temperature.
Ref QB-EQA5BVSource: OpenStax Physics, Section 11.2 (Heat Transfer): metals such as copper and aluminum are good heat conductors; heat transfer occurs whenever there is a temperature difference, slowly through insulated wallsReport a problem with this question
34. A student drops a rubber ball from rest at a height of 2.00 m onto a hard floor. Video shows the ball rising to only 1.40 m after its first bounce. Air resistance is too small to matter. The student also hears a thud at impact, and a thermal camera shows the ball and the spot on the floor slightly warmer. Which statement best explains why the ball did not return to 2.00 m?
- A.The collision destroyed some of the ball's total energy
- B.Gravity used up some of the ball's energy during the fall
- C.The floor kept the missing energy as stored potential energy
- D.The collision turned some of its energy into heat and sound✓ Answer
By the law of conservation of energy, total energy in a closed system stays constant; it changes form but is not destroyed. During the fall, gravity converts potential energy into kinetic energy without using any up, so the ball's mechanical energy at impact matched its starting energy. The thud and the warming show that the collision converted part of that mechanical energy into sound and thermal energy, leaving less to lift the ball back up. The floor did not rise, so it gained no gravitational potential energy.
Ref QB-X7GAWVSource: OpenStax Physics, Section 9.2 (Mechanical Energy and Conservation of Energy): in a closed system total energy is conserved; friction and similar processes convert mechanical energy into heatReport a problem with this question
35. A student places 25.0 mL of hydrochloric acid and 3 drops of phenolphthalein in a flask, then adds sodium hydroxide (NaOH) solution drop by drop, swirling after each addition. Her notes: at 10.0 mL, colorless; at 20.0 mL, colorless; at 24.0 mL, a pink flash that fades on swirling; at 24.5 mL, a faint pink that stays; at 26.0 mL, deep pink. At about what total volume of NaOH was the acid just neutralized (the endpoint)?
- A.About 26.0 mL, where the pink color becomes deepest
- B.About 24.5 mL, where a faint pink color first stays✓ Answer
- C.About 24.0 mL, the last reading before pink appears
- D.About 0 mL, since a colorless acid is already neutral
Phenolphthalein is colorless in acidic and neutral solutions and turns pink once the solution becomes slightly basic (above about pH 8.3). The first faint pink that stays after swirling, at about 24.5 mL, shows that all of the acid has just been used up, so that is the endpoint. At 24.0 mL the pink faded, meaning acid was still left; deep pink at 26.0 mL means excess base was added past the endpoint. Colorless at the start only shows the solution is not basic, not that it is neutral.
Ref QB-DQXS5USource: OpenStax Chemistry 2e, Section 14.7 (Acid-Base Titrations, Acid-Base Indicators): phenolphthalein is colorless below pH 8.3 and red or pink above pH 8.3Report a problem with this question
36. Phosphorus-32, a radioactive isotope used to label DNA in laboratories, decays when its nucleus emits a beta particle (an electron). A section of the periodic table shows: silicon (Si), atomic number 14; phosphorus (P), atomic number 15; sulfur (S), atomic number 16. Which nucleus is produced by this decay?
- A.Silicon-32, with atomic number 14 and mass number 32
- B.Phosphorus-31, with atomic number 15 and mass number 31
- C.Sulfur-32, with atomic number 16 and mass number 32✓ Answer
- D.Sulfur-33, with atomic number 16 and mass number 33
In beta decay a neutron in the nucleus changes into a proton and an emitted electron. The proton count rises by one, from 15 to 16, so the element becomes sulfur; because a neutron was swapped for a proton, the total of protons plus neutrons stays 32, so the mass number does not change. Losing a proton (silicon), losing mass (P-31), or gaining mass (S-33) are not what beta decay does.
Ref QB-W75YQUSource: OpenStax Chemistry 2e, Section 21.3 (Radioactive Decay): beta decay converts a neutron into a proton and a beta particle; emission of an electron does not change the mass numberReport a problem with this question
37. Astronomers track a comet on a long, stretched elliptical orbit around the Sun. They record its position at the start and end of two 30-day periods: Period 1 while the comet is near its closest point to the Sun, and Period 2 while it is near its farthest point. Lines drawn from the Sun to the comet's start and end positions form two triangle-like regions, and the two regions have the same area. Which conclusion follows from Kepler's second law?
- A.The comet covered equal stretches of path in both periods
- B.The comet covered a longer stretch of path in Period 1✓ Answer
- C.The comet covered a longer stretch of path in Period 2
- D.The two path lengths cannot be compared using the areas
Kepler's second law says the line joining an orbiting body and the Sun sweeps out equal areas in equal times. Near the Sun that line is short, so to cover the same area the region must be wide, meaning the comet moved along a longer stretch of its path; far from the Sun the line is long, so a narrow sliver gives the same area. Equal areas therefore do not mean equal distances: the comet moves fastest near its closest point (perihelion) and slowest near its farthest point (aphelion).
Ref QB-CQKFYSSource: NASA Science, "Orbits and Kepler's Laws": Kepler's Second Law, the line joining a planet and the Sun sweeps out equal areas in equal times, so a body moves fastest near perihelionReport a problem with this question
Other topics in this exam
Practice questions built from the content categories in the published HiSET Test at a Glance. HiSET is a registered trademark of its owner; this site is not affiliated with or endorsed by PSI Services LLC or ETS, and these are not real test questions. Passing requirements, fees, retake limits, and age and residency eligibility are set by the program and by each state and change over time — confirm the current rules for your state before testing. The Writing subtest also includes an essay, which multiple-choice practice cannot cover. HiSET Test at a Glance →