Chapters0/25 ▾
Chapter 5 · Lesson 2 of 5
Measured pours and counting standard drinks
Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.
1 min read
Drink counting is the backbone of pacing and cutoff decisions, and a count only means something if each drink is a known amount. That is why house policies call for jiggers, metered pour spouts or lined glassware.
Free-poured drinks can vary by an ounce or more, so two guests with three drinks each on the check may have had very different amounts of alcohol, and every later decision rests on guesswork.
Count alcohol, not glassware. A U.S. standard drink is 0.6 fl oz of pure alcohol, so divide (volume x ABV) by 0.6 and add every alcoholic ingredient in a cocktail. Example from the table below: three of those martinis add up to about 5.5 standard drinks, not three.
| Drink | Pure alcohol | Standard drinks |
|---|---|---|
| 20 fl oz cider at 8% | 20 x 0.08 = 1.6 fl oz | About 2.7 |
| Martini: 2.5 fl oz gin at 40% + 0.5 fl oz vermouth at 18% | 1.0 + 0.09 = 1.09 fl oz | About 1.8 |
Check yourself
1. A house cocktail is built with 3 fl oz of 80-proof rum (40% ABV) served in one tall glass. For drink-counting purposes, how should the server record that single glass?
2. Why does a written house policy require jiggers, metered pour spouts or lined glassware instead of leaving pour size to the bartender's hand?
Facts checked 2026-11-16 · Sources: NIAAA: What Is a Standard Drink?, NIAAA Alcohol Policy Information System
Alcohol Server cheat sheet: every key fact on one page →